when the underlying qemu supports the drive/device model and the
controller has been added this way.
* src/qemu/qemu_driver.c: use qemuMonitorDelDevice() when detaching
  PCI controller and if supported
* src/qemu/qemu_monitor.[ch]: add new qemuMonitorDelDevice() function
* src/qemu/qemu_monitor_json.[ch]: JSON backend for DelDevice command
* src/qemu/qemu_monitor_text.[ch]: Text backend for DelDevice command

When in JSON mode, QEMU requires that 'qmp_capabilities' is run as
the first command in the monitor. This is a no-op when run in the
text mode monitor

* src/qemu/qemu_driver.c: Run capabilities negotiation when
  connecting to the monitor
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h,
  src/qemu/qemu_monitor_json.c, src/qemu/qemu_monitor_json.h: Add
  support for the 'qmp_capabilities' command, no-op in text mode.

The old text mode monitor prompts for a password when disks are
encrypted. This interactive approach doesn't work for JSON mode
monitor. Thus there is a new 'block_passwd' command that can be
used.

* src/qemu/qemu_driver.c: Split out code for looking up a disk
  secret from findVolumeQcowPassphrase, into a new method
  getVolumeQcowPassphrase. Enhance qemuInitPasswords() to also
  set the disk encryption password via the monitor
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h,
  src/qemu/qemu_monitor_json.c, src/qemu/qemu_monitor_json.h,
  src/qemu/qemu_monitor_text.c, src/qemu/qemu_monitor_text.h: Add
  support for the 'block_passwd' monitor command.

The way QEMU is started has been changed to use '-device' and
the new style '-drive' syntax. This needs to be mirrored in
the hotplug code, requiring addition of two new APIs.

* src/qemu/qemu_monitor.h, src/qemu/qemu_monitor.c: Define APIs
  qemuMonitorAddDevice() and qemuMonitorAddDrive()
* src/qemu/qemu_monitor_json.c, src/qemu/qemu_monitor_json.h,
  src/qemu/qemu_monitor_text.c, src/qemu/qemu_monitor_text.h:
  Implement the new monitor APIs

Hotunplug of devices requires that we know their PCI address. Even
hotplug of SCSI drives, required that we know the PCI address of
the SCSI controller to attach the drive to. We can find this out
by running 'info pci' and then correlating the vendor/product IDs
with the devices we booted with.

Although this approach is somewhat fragile, it is the only viable
option with QEMU < 0.12, since there is no way for libvirto set
explicit PCI addresses when creating devices in the first place.
For QEMU > 0.12, this code will not be used.

* src/qemu/qemu_driver.c: Assign all dynamic PCI addresses on
  startup of QEMU VM, matching vendor/product IDs
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h,
  src/qemu/qemu_monitor_json.c, src/qemu/qemu_monitor_json.h,
  src/qemu/qemu_monitor_text.c, src/qemu/qemu_monitor_text.h: Add
  API for fetching PCI device address mapping

The current SCSI hotplug support attaches a brand new SCSI controller
for every disk. This is broken because the semantics differ from those
used when starting the VM initially. In the latter case, each SCSI
controller is filled before a new one is added.

If the user specifies an high drive index (sdazz) then at initial
startup, many intermediate SCSI controllers may be added with no
drives.

This patch changes SCSI hotplug so that it exactly matches the
behaviour of initial startup. First the SCSI controller number is
determined for the drive to be hotplugged. If any controller upto
and including that controller number is not yet present, it is
attached. Then finally the drive is attached to the last controller.

NB, this breaks SCSI hotunplug, because there is no 'drive_del'
command in current QEMU. Previous SCSI hotunplug was broken in
any case because it was unplugging the entire controller, not
just the drive in question.

A future QEMU will allow proper SCSI hotunplug of a drive.

This patch is derived from work done by Wolfgang Mauerer on disk
controllers.

* src/qemu/qemu_driver.c: Fix SCSI hotplug to add a drive to
 the correct controller, instead of just attaching a new
  controller.
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h,
  src/qemu/qemu_monitor_json.c, src/qemu/qemu_monitor_json.h,
  src/qemu/qemu_monitor_text.c, src/qemu/qemu_monitor_text.h: Add
  support for 'drive_add' command

This patch allows for explicit hotplug/unplug of SCSI controllers.
Ordinarily this is not required, since QEMU/libvirt will attach
a new SCSI controller whenever one is required. Allowing explicit
hotplug of controllers though, enables the caller to specify a
static PCI address, instead of auto-assigning the next available
PCI slot. Or it will when we have static PCI addressing.

This patch is derived from Wolfgang Mauerer's disk controller
patch series.

* src/qemu/qemu_driver.c: Support hotplug & unplug of SCSI
  controllers
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h,
  src/qemu/qemu_monitor_json.c, src/qemu/qemu_monitor_json.h,
  src/qemu/qemu_monitor_text.c, src/qemu/qemu_monitor_text.h: Add
  new API for attaching PCI SCSI controllers

Convert the QEMU monitor APIs over to use virDomainDeviceAddress
structs for passing addresses in/out, instead of individual bits.
This makes the number of parameters smaller & easier to deal with.
No functional change

* src/qemu/qemu_driver.c, src/qemu/qemu_monitor.c,
  src/qemu/qemu_monitor.h, src/qemu/qemu_monitor_text.c,
  src/qemu/qemu_monitor_text.h: Change monitor hotplug APIs to
  take an explicit address ptr for all host/guest addresses

This change makes the QEMU driver get pty paths from the output of the
monitor 'info chardev' command. This output is structured, and contains
both the name of the device and the path on the same line. This is
considerably more reliable than parsing the startup log output, which
requires the parsing code to know which order QEMU will print pty
information in.

Note that we still need to parse the log output as the monitor itself
may be on a pty. This should be rare, however, and the new code will
replace all pty paths parsed by the log output method once the monitor
is available.

* src/qemu/qemu_monitor.(c|h) src/qemu_monitor_text.(c|h): Implement
  qemuMonitorGetPtyPaths().
* src/qemu/qemu_driver.c: Get pty path information using
  qemuMonitorGetPtyPaths().

* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h: Add callbacks
  for reset, shutdown, poweroff and stop events. Add convenience
  methods for emiting those events

With addition of events there will be alot of callbacks.
To avoid having to add many APIs to register callbacks,
provide them all at once in a big table

* src/qemu/qemu_driver.c: Pass in a callback table to QEMU
  monitor code
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h Replace
  the EOF and disk secret callbacks with a callback table

Initial support for the new QEMU monitor protocol  using JSON
as the data encoding format instead of plain text

* po/POTFILES.in: Add src/qemu/qemu_monitor_json.c
* src/qemu/qemu_conf.c, src/qemu/qemu_conf.h: Hack to turn on QMP
  mode. Replace with a version number check on >= 0.12 later
* src/qemu/qemu_monitor.c: Delegate to json monitor if enabled
* src/qemu/qemu_monitor_json.c, src/qemu/qemu_monitor_json.h: Add
  impl of QMP protocol
* src/Makefile.am: Add src/qemu/qemu_monitor_json.{c,h}

Now that drivers are using a private domain object state blob,
the virDomainObjFormat/Parse methods are no longer able to
directly serialize all neccessary state to/from XML. It is
thus neccessary to introduce a pair of callbacks fo serializing
private state.

The code for serializing vCPU PIDs and the monitor device
config can now move out of domain_conf.c and into the
qemu_driver.c where they belong.

* src/conf/capabilities.h: Add callbacks for serializing private
  state to/from XML
* src/conf/domain_conf.c, src/conf/domain_conf.h: Remove the
  monitor, monitor_chr, monitorWatch, nvcpupids and vcpupids
  fields from virDomainObjPtr. Remove code that serialized
  those fields
* src/libvirt_private.syms: Export virXPathBoolean
* src/qemu/qemu_driver.c: Add callbacks for serializing monitor
  and vcpupid data to/from XML
* src/qemu/qemu_monitor.h, src/qemu/qemu_monitor.c: Pass monitor
  char device config into qemuMonitorOpen directly.

The current QEMU disk media change does not support setting the
disk format. The new JSON monitor will support this, so add an
extra parameter to pass this info in

* src/qemu/qemu_driver.c: Pass in disk format when changing media
* src/qemu/qemu_monitor.h, src/qemu/qemu_monitor.c,
  src/qemu/qemu_monitor_text.c, src/qemu/qemu_monitor_text.h:
  Add a 'format' arg to qemuMonitorChangeMedia()

The qemuMonitorEscape() method, and the VIR_ENUM for migration
status will be needed by the JSON monitor too, so move that code
into the shared qemu_monitor.c file instead of qemu_monitor_text.c

* src/qemu/qemu_monitor.h: Declare qemuMonitorMigrationStatus enum
  and qemuMonitorEscapeArg and qemuMonitorEscapeShell methods
* src/qemu/qemu_monitor.c: Implement qemuMonitorMigrationStatus enum
  and qemuMonitorEscapeArg and qemuMonitorEscapeShell methods
* src/qemu/qemu_monitor_text.c: Remove above methods/enum

If QEMU shuts down while we're in the middle of processing a
monitor command, the monitor will be freed, and upon cleaning
up we attempt to do  qemuMonitorUnlock(priv->mon) when priv->mon
is NULL.

To address this we introduce proper reference counting into
the qemuMonitorPtr object, and hold an extra reference whenever
executing a command.

* src/qemu/qemu_driver.c: Hold a reference on the monitor while
  executing commands, and only NULL-ify the priv->mon field when
  the last reference is released
* src/qemu/qemu_monitor.h, src/qemu/qemu_monitor.c: Add reference
  counting to handle safe deletion of monitor objects

Change the QEMU monitor file handle watch to poll for both
read & write events, as well as EOF. All I/O to/from the
QEMU monitor FD is now done in the event callback thread.

When the QEMU driver needs to send a command, it puts the
data to be sent into a qemuMonitorMessagePtr object instance,
queues it for dispatch, and then goes to sleep on a condition
variable. The event thread sends all the data, and then waits
for the reply to arrive, putting the response / error data
back into the qemuMonitorMessagePtr and notifying the condition
variable.

There is a temporary hack in the disk passphrase callback to
avoid acquiring the domain lock.  This avoids a deadlock in
the command processing, since the domain lock is still held
when running monitor commands. The next commit will remove
the locking when running commands & thus allow re-introduction
of locking the disk passphrase callback

* src/qemu/qemu_driver.c: Temporarily don't acquire lock in
  disk passphrase callback. To be reverted in next commit
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h: Remove
  raw I/O functions, and a generic qemuMonitorSend() for
  invoking a command
* src/qemu/qemu_monitor_text.c, src/qemu/qemu_monitor_text.h:
  Remove all low level I/O, and use the new qemuMonitorSend()
  API. Provide a qemuMonitorTextIOProcess() method for detecting
  command/reply/prompt boundaries in the monitor data stream

In preparation of the monitor I/O process becoming fully asynchronous,
it is neccessary to ensure all access to internals of the qemuMonitorPtr
object is protected by a mutex lock.

* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h: Add mutex for locking
  monitor.
* src/qemu/qemu_driver.c: Add locking around all monitor commands

Change the QEMU driver to not directly invoke the text mode monitor
APIs. Instead add a generic wrapper layer, which will eventually
invoke either the text or JSON protocol code as needed. Pass an
qemuMonitorPtr object into the monitor APIs instead of virDomainObjPtr
to complete the de-coupling of the monitor impl from virDomainObj
data structures

* src/qemu/qemu_conf.h: Remove qemuDomainObjPrivate definition
* src/qemu/qemu_driver.c: Add qemuDomainObjPrivate definition.
  Pass qemuMonitorPtr into all monitor APIs instead of the
  virDomainObjPtr instance.
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h: Add thin
  wrappers for all qemuMonitorXXX command APIs, calling into
  qemu_monitor_text.c/h
* src/qemu/qemu_monitor_text.c, src/qemu/qemu_monitor_text.h:
  Rename qemuMonitor -> qemuMonitorText & update to accept
  qemuMonitorPtr instead of virDomainObjPtr

Decouple the monitor code from the virDomainDefPtr structure
by moving the disk encryption lookup code back into the
qemu_driver.c file. Instead provide a function callback to
the monitor code which can be invoked to retrieve encryption
data as required.

* src/qemu/qemu_driver.c: Add findDomainDiskEncryption,
  and findVolumeQcowPassphrase. Pass address of the method
  findVolumeQcowPassphrase into qemuMonitorOpen()
* src/qemu/qemu_monitor.c: Associate a disk
  encryption function callback with the qemuMonitorPtr
  object.
* src/qemu/qemu_monitor_text.c: Remove findDomainDiskEncryption
  and findVolumeQcowPassphrase.

Introduce a new qemuDomainObjPrivate object which is used to store
the private QEMU specific data associated with each virDomainObjPtr
instance. This contains a single member, an instance of the new
qemuMonitorPtr object which encapsulates the QEMU monitor state.
The internals of the latter are private to the qemu_monitor* files,
not to be shown to qemu_driver.c

* src/qemu/qemu_conf.h: Definition of qemuDomainObjPrivate.
* src/qemu/qemu_driver.c: Register a functions for creating
  and freeing qemuDomainObjPrivate instances with the domain
  capabilities. Remove the qemudDispatchVMEvent() watch since
  I/O watches are now handled by the monitor code itself. Pass
  a new qemuHandleMonitorEOF() callback into qemuMonitorOpen
  to allow notification when the monitor quits.
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h: Introduce
  the 'qemuMonitor' object. Temporarily add new APIs
  qemuMonitorWrite, qemuMonitorRead, qemuMonitorWaitForInput
  to allow text based monitor impl to perform I/O.
* src/qemu/qemu_monitor_text.c: Call APIs for reading/writing
  to monitor instead of accessing the file handle directly.

The qemu_driver.c code should not contain any code that interacts
with the QEMU monitor at a low level. A previous commit moved all
the command invocations out. This change moves out the code which
actually opens the monitor device.

* src/qemu/qemu_driver.c: Remove qemudOpenMonitor & methods called
  from it.
* src/Makefile.am: Add qemu_monitor.{c,h}
* src/qemu/qemu_monitor.h: Add qemuMonitorOpen()
* src/qemu/qemu_monitor.c: All code for opening the monitor

* daemon/qemud.c, src/Makefile.am: Adapt for changed paths
* src/network_driver.c: Rename to src/network/bridge_driver.c
* src/network_driver.h: Rename to src/network/bridge_driver.h

* src/internal.h: move xstrol() variants from here ...

* src/util.[ch]: ... to here and rename to virStrToLong()

* src/libvirt_sym.version: export __virStrToLong_i() for
virsh and qemud.

* src/nodeinfo.c, src/stats_linux.c, src/virsh.c,
  src/xend_internal.c, qemud/qemud.c: replace xstrtol()
calls with virStrToLong()

* src/nodeinfo.h: don't include internal.h, which was only
needed for xstrtol(), but instead include libvirt.h which
is suffificient for the declarations in the header.

  stylesheet
* docs/*: regenerated
* src/bridge.c src/bridge.h src/buf.c src/iptables.c src/libvirt.c
  src/qemu_driver.c src/qemu_driver.h src/uuid.c src/uuid.h: cleanup,
  addd comments, made functions static and fixe a few bugs
Daniel

  src/sexpr.h src/test.c src/xm_internal.c src/xml.c src/xml.h:
  applied patch from Richard Jones adding check to printf-like
  functions and fixing the problems raised
Daniel

        * qemud/protocol.h: add the (domain/network)(Get/Set)Autostart
        requests and replies to the protocol.

        * src/qemu_internal.c: hookup the qemu driver autostart
        methods

        * qemud/dispatch.c, qemud/driver.[ch], internal.h: add
        the daemon side, but just set an in-memory autostart
        flag for now.