Commit 03d0959a introduced a compilation error in
src/xenconfig/xen_xl.c on ARM. Found by Xen's osstest

http://logs.test-lab.xenproject.org/osstest/logs/116216/build-armhf-libvirt/6.ts-libvirt-build.log

While we have collective knowledge about the support status of various
parts of libvirt, this has never been formally documented, leaving our
users to guess.

Note, this document makes one change to our previous policy. It explicitly
declares the RPC protocol of libvirtd as being a supported interface. THis
accepts the reality that we can a) never change it without breaking compat
with old libvirt.so, b) there are both rust + go impls that are written
against the RPC protocol already.
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>
Reviewed-by: NJim Fehlig <jfehlig@suse.com>
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

The XML namespace URI for the QEMU/LXC drivers must use http as the protocol
otherwise it won't match the parser's expectations.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Resolve a storage driver crash as a result of a long running
storageVolCreateXML when the virStorageVolPoolRefreshThread is
run as a result of when a storageVolUpload completed and ran the
virStoragePoolObjClearVols without checking if the creation
code was currently processing a buildVol after incrementing
the driver->asyncjob count.

The refreshThread will now check the pool asyncjob count before
attempting to pursue the pool refresh. Adjust the documentation
to describe the condition.

Crash from valgrind is as follows (with a bit of editing):

==21309== Invalid read of size 8
==21309==    at 0x153E47AF: storageBackendUpdateVolTargetInfo
==21309==    by 0x153E4C30: virStorageBackendUpdateVolInfo
==21309==    by 0x153E52DE: virStorageBackendVolRefreshLocal
==21309==    by 0x153DE29E: storageVolCreateXML
==21309==    by 0x562035B: virStorageVolCreateXML
==21309==    by 0x147366: remoteDispatchStorageVolCreateXML
...
==21309==  Address 0x2590a720 is 64 bytes inside a block of size 336 free'd
==21309==    at 0x4C2F2BB: free
==21309==    by 0x54CB9FA: virFree
==21309==    by 0x55BC800: virStorageVolDefFree
==21309==    by 0x55BF1D8: virStoragePoolObjClearVols
==21309==    by 0x153D967E: virStorageVolPoolRefreshThread
...
==21309==  Block was alloc'd at
==21309==    at 0x4C300A5: calloc
==21309==    by 0x54CB483: virAlloc
==21309==    by 0x55BDC1F: virStorageVolDefParseXML
==21309==    by 0x55BDC1F: virStorageVolDefParseNode
==21309==    by 0x55BE5A4: virStorageVolDefParse
==21309==    by 0x153DDFF1: storageVolCreateXML
==21309==    by 0x562035B: virStorageVolCreateXML
==21309==    by 0x147366: remoteDispatchStorageVolCreateXML
...

This is similar to the virDomainQemuMonitorCommand API, it can change
the domain state in a way that libvirt may not understand.
Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

The 'set-lifcycle-action' is throwing a weird error after executing it with
the '--help' option. The command output is showing the options 'type' and
'action' are as optional, but they aren't. Both are required.

virsh # set-lifecycle-action --help
...
  SYNOPSIS
    set-lifecycle-action <domain> [--type <string>] [--action <string>] ...
...
  OPTIONS
    [--domain] <string>  domain name, id or uuid
error: internal error: bad options in command: 'set-lifecycle-action'

After applying this patch, both arguments are required now.

virsh # set-lifecycle-action --help
...
  SYNOPSIS
    set-lifecycle-action <domain> <type> <action> [--config] ...

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1509870Signed-off-by: NJulio Faracco <jcfaracco@gmail.com>

We need to call it anyway, so the else branch is redundant here.
Signed-off-by: NErik Skultety <eskultet@redhat.com>

We put the server into a hash table as we do with the other daemons,
there is no compelling reason why it should have another pointer
dedicated just to the server. Besides, the locking daemon doesn't have
it and virtlogd is essentially a copy paste of virtlockd.
Signed-off-by: NErik Skultety <eskultet@redhat.com>

In the definition of virHookQemuOpType and virHookNetworkOpType,
we should use 'stopped' rather than 'shutdown'.
Signed-off-by: NChen Hanxiao <chenhanxiao@gmail.com>

Signed-off-by: NAndrea Bolognani <abologna@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

Signed-off-by: NAndrea Bolognani <abologna@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

Signed-off-by: NAndrea Bolognani <abologna@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

Most of the time it's okay to leave this up to negotiation between
the guest and the host, but in some situations it can be useful to
manually decide the behavior, especially to enforce its availability.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1308743Signed-off-by: NAndrea Bolognani <abologna@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

Some compilers may get confused and decide we are calling strcmp with
NULL argument from test_virCapsDomainDataLookupLXC. Although this does
not really happen since the call is guarded with
(data->machinetype != expect_machinetype), using STRNEQ_NULLABLE is
easier to understand, less fragile, and doing so makes sure strcmp is
never called with NULL argument.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

Add two new entries under new features for 3.10.0. One
advertising support for specifying distance between vNUMA cells
and another advertising Xen's support for vNUMA configuration.
Signed-off-by: NJim Fehlig <jfehlig@suse.com>
Reviewed-by: NErik Skultety <eskultet@redhat.com>

Signed-off-by: NJiri Denemark <jdenemar@redhat.com>
Reviewed-by: NPavel Hrdina <phrdina@redhat.com>

Reword the message and drop the numbers (which were reversed) from it
so that it actually makes sense.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1509151

Setup everything related to disks in one place rather than calling in
from various places.

The change to ordering of the setup steps is necessary since secrets
need the master key to be present.

In some cases it does not make sense to pursue that the private data
will be allocated (especially when we don't need to put anything in it).

Ensure that the code works without it.

This also fixes few crashes pointed out in
https://bugzilla.redhat.com/show_bug.cgi?id=1510323

Use virDomainDiskDefNew instead of VIR_ALLOC in
qemuParseCommandLineDisk.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1510781

If creation of the main JSON object containing the storage portion of a
virStorageSource would fail but we'd allocate the server structure we'd
leak it. Found by coverity.

Return NULL right away in qemuBlockStorageSourceGetBackendProps when an
invalid storage source is presented so that virJSONValueObjectAdd isn't
called with a NULL argument.

Found by coverity.

The terminator would not be parsed properly since the XPath selector was
looking for an populated element, and also the code did not bother
assigning the terminating virStorageSourcePtr to the backingStore
property of the parent.

Some tests would catch it if there wasn't bigger fallout from the change
to backing store termination in a693fdba. Fix them properly now.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1509110

https://bugzilla.redhat.com/show_bug.cgi?id=1497410

This reverts commit bc8a99ef.

The vhostuser is not a TAP. Therefore our QoS code is not able to
set any bandwidth. I don't really understand what I was thinking.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Add tests to ensure the libxl_domain_config generator properly
handles vNUMA configuration.
Signed-off-by: NWim ten Have <wim.ten.have@oracle.com>
Reviewed-by: NJim Fehlig <jfehlig@suse.com>
Signed-off-by: NJim Fehlig <jfehlig@suse.com>

Add tests for conversion of domXML vNUMA config to/from
xen-xl native vNUMA config.
Signed-off-by: NWim ten Have <wim.ten.have@oracle.com>
Reviewed-by: NJim Fehlig <jfehlig@suse.com>
Signed-off-by: NJim Fehlig <jfehlig@suse.com>

This patch generates a NUMA distance-aware libxl description from the
information extracted from a NUMA distance-aware libvirt XML file.

By default, if no NUMA node distance information is supplied in the
libvirt XML file, this patch uses the distances 10 for local and 20
for remote nodes/sockets.
Signed-off-by: NWim ten Have <wim.ten.have@oracle.com>
Reviewed-by: NJim Fehlig <jfehlig@suse.com>
Signed-off-by: NJim Fehlig <jfehlig@suse.com>

This patch converts NUMA configurations between the Xen libxl
configuration file format and libvirt's XML format.

XML HVM domain on a 4 node (2 cores/socket) configuration:

  <cpu>
    <numa>
      <cell id='0' cpus='0-1' memory='2097152' unit='KiB'>
        <distances>
          <sibling id='0' value='10'/>
          <sibling id='1' value='21'/>
          <sibling id='2' value='31'/>
          <sibling id='3' value='21'/>
        </distances>
      </cell>
      <cell id='1' cpus='2-3' memory='2097152' unit='KiB'>
        <distances>
          <sibling id='0' value='21'/>
          <sibling id='1' value='10'/>
          <sibling id='2' value='21'/>
          <sibling id='3' value='31'/>
        </distances>
      </cell>
      <cell id='2' cpus='3-4' memory='2097152' unit='KiB'>
        <distances>
          <sibling id='0' value='31'/>
          <sibling id='1' value='21'/>
          <sibling id='2' value='10'/>
          <sibling id='3' value='21'/>
        </distances>
      </cell>
      <cell id='3' cpus='5-6' memory='2097152' unit='KiB'>
        <distances>
          <sibling id='0' value='21'/>
          <sibling id='1' value='31'/>
          <sibling id='2' value='21'/>
          <sibling id='3' value='10'/>
        </distances>
      </cell>
    </numa>
  </cpu>

Xen xl.cfg domain configuration:

  vnuma = [["pnode=0","size=2048","vcpus=0-1","vdistances=10,21,31,21"],
           ["pnode=1","size=2048","vcpus=2-3","vdistances=21,10,21,31"],
           ["pnode=2","size=2048","vcpus=4-5","vdistances=31,21,10,21"],
           ["pnode=3","size=2048","vcpus=6-7","vdistances=21,31,21,10"]]

If there is no XML <distances> description amongst the <cell> data the
conversion schema from xml to native will generate 10 for local and 20
for all remote instances.
Signed-off-by: NWim ten Have <wim.ten.have@oracle.com>
Reviewed-by: NJim Fehlig <jfehlig@suse.com>
Signed-off-by: NJim Fehlig <jfehlig@suse.com>

Add support for describing NUMA distances in a domain's <numa> <cell>
XML description.

Below is an example of a 4 node setup:

  <cpu>
    <numa>
      <cell id='0' cpus='0-3' memory='2097152' unit='KiB'>
        <distances>
          <sibling id='0' value='10'/>
          <sibling id='1' value='21'/>
          <sibling id='2' value='31'/>
          <sibling id='3' value='21'/>
        </distances>
      </cell>
      <cell id='1' cpus='4-7' memory='2097152' unit='KiB'>
        <distances>
          <sibling id='0' value='21'/>
          <sibling id='1' value='10'/>
          <sibling id='2' value='21'/>
          <sibling id='3' value='31'/>
        </distances>
      </cell>
      <cell id='2' cpus='8-11' memory='2097152' unit='KiB'>
        <distances>
          <sibling id='0' value='31'/>
          <sibling id='1' value='21'/>
          <sibling id='2' value='10'/>
          <sibling id='3' value='21'/>
        </distances>
      <cell id='3' cpus='12-15' memory='2097152' unit='KiB'>
        <distances>
          <sibling id='0' value='21'/>
          <sibling id='1' value='31'/>
          <sibling id='2' value='21'/>
          <sibling id='3' value='10'/>
        </distances>
      </cell>
    </numa>
  </cpu>

A <cell> defines a NUMA node. <distances> describes the NUMA distance
from the <cell> to the other NUMA nodes (the <sibling>s).  For example,
in above XML description, the distance between NUMA node0 <cell id='0'
...> and NUMA node2 <sibling id='2' ...> is 31.

Valid distance values are '10 <= value <= 255'.  A distance value of 10
represents the distance to the node itself.  A distance value of 20
represents the default value for remote nodes but other values are
possible depending on the physical topology of the system.

When distances are not fully described, any missing sibling distance
values will default to 10 for local nodes and 20 for remote nodes.

If distance is given for A -> B, then we default B -> A to the same
value instead of 20.
Signed-off-by: NWim ten Have <wim.ten.have@oracle.com>
Reviewed-by: NDaniel P. Berrange <berrange@redhat.com>
Signed-off-by: NJim Fehlig <jfehlig@suse.com>

To avoid the chance that the loop is run twice, set the neventCallbacks
to zero after VIR_FREE(eventCallbacks) was called.

Since colors would be used when writing to stdout, then check that
stdout is a TTY, instead of stdin.

This avoids the usage of terminal color codes when the output is
directed to file.

https://bugzilla.redhat.com/show_bug.cgi?id=1434451

When testing user aliases it was discovered that for 440fx
machine type which has default IDE bus builtin, domain cannot
start if IDE controller has the user provided alias. This is
because for 440fx we don't put the IDE controller onto the
command line (since it is builtin) and therefore any device that
is plugged onto the bus must use the default alias.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

libvirt reports a fake NUMA topology in virConnectGetCapabilities
even if built without numactl support. The fake NUMA topology consists
of a single cell representing the host's cpu and memory resources.
Currently this is the case for ARM and s390[x] RPM builds.

A client iterating over NUMA cells obtained via virConnectGetCapabilities
and invoking virNodeGetMemoryStats on them will see an internal failure
"NUMA isn't available on this host" from virNumaGetMaxNode. An example
for such a client is VDSM.

Since the intention seems to be that libvirt always reports at least
a single cell it is necessary to return "fake" node memory statistics
matching the previously reported fake cell in case NUMA isn't supported
on the system.
Signed-off-by: NViktor Mihajlovski <mihajlov@linux.vnet.ibm.com>

Simply add the 5.2 SDK header to the existing unified framework. No
other special handling is needed as there's no API break between
existing 5.1 and the just added 5.2.

Extracted from 5.2 SDK and reindented with cppi

There was a recent report of the xen-xl converter not handling
config files missing an ending newline

https://www.redhat.com/archives/libvir-list/2017-October/msg01353.html

Commit 3cc2a9e0 fixed a similar problem when parsing content of a
file but missed parsing in-memory content. But AFAICT, the better
fix is to properly set the end of the content when initializing the
virConfParserCtxt in virConfParse().

This commit reverts the part of 3cc2a9e0 that appends a newline to
files missing it, and fixes setting the end of content when
initializing virConfParserCtxt. A test is also added to check
parsing in-memory content missing an ending newline.
Signed-off-by: NJim Fehlig <jfehlig@suse.com>
Reviewed-by: NDaniel P. Berrange <berrange@redhat.com>

Use bool instead of an int.

In 4f157072 I've tried to make duplicates detection for
nested /dev mount better. However, I've missed the obvious case
when there are two same mount points. For instance if:

  # mount --bind /dev/blah /dev/blah
  # mount --bind /dev/blah /dev/blah

Yeah, very unlikely (in qemu driver world) but possible.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>