Disk serial is not a property of the image but of the disk frontend.
Account for this appropriately.

Historically we've formatted a lot of the attributes of a disk (disk
geometry, etc) with -drive. Since we use -device now, they should be
formatted there. Extract them to a separate function for keeping
compatibility with SDcards which still use only -drive.

Start this by moving the geometry into a separate function.

When doing block commit we need to allow write for members of the
backing chain so that we can commit the data into them.

qemuDomainDiskChainElementPrepare was used for this which since commit
786d8d91 calls qemuDomainNamespaceSetupDisk which has very adverse
side-effects, namely it relabels the nodes to the same label it has in
the main namespace. This was messing up permissions for the commit
operation since its touching various parts of a single backing chain.

Since we are are actually not introducing new images at that point add a
flag for qemuDomainDiskChainElementPrepare which will refrain from
calling to the namespace setup function.

Calls from qemuDomainSnapshotCreateSingleDiskActive and
qemuDomainBlockCopyCommon do introduce new members all calls from
qemuDomainBlockCommit do not, so the calls are anotated accordingly.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1506072

According to the man page <interface-device> can be specified either by
name or MAC address, adjust the command's help accordingly.
Signed-off-by: NZhiPeng Lu <lu.zhipeng@zte.com.cn>
Reviewed-by: NErik Skultety <eskultet@redhat.com>
Signed-off-by: NErik Skultety <eskultet@redhat.com>

Since we don't pack symlinks we cannot have recursive loops in them.  Since we
need one directory to be in tests/vircaps2xmldata/linux-caches/, instead of
creating a symlink, just move the files in that directory and adjust tests.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

Because WARN_CFLAGS and COVERAGE_CFLAGS are not set globally, we
rely on each binary built to include WARN_CFLAGS/COVERAGE_CFLAGS.
But it is easy to forget those - e.g. libvirt_shell.la. However,
don't enable WARN_FLAGS (i.e. don't include AM_CFLAGS) for
wireshark plugin - parts of that code are generated and trigger
some warnings.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NErik Skultety <eskultet@redhat.com>

We want to set CFLAGS not CPPFLAGS.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NErik Skultety <eskultet@redhat.com>

There are couple of limitations when it comes to option types and
flags for the options. For instance, VSH_OT_STRING cannot have
VSH_OFLAG_REQ set (commit c7543a72). For some reason this is
checked in vshCmddefHelp() but not in vshCmddefCheckInternals().
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NErik Skultety <eskultet@redhat.com>

Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NDaniel P. Berrange <berrange@redhat.com>

https://bugzilla.redhat.com/show_bug.cgi?id=1434451

Just like in 9324f67a we need to put default pci-root
alias onto the command line instead of the one provided by user.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

https://bugzilla.redhat.com/show_bug.cgi?id=1434451

Just like in 9324f67a we need to put default sata alias
(which is hardcoded to "ide", obvious, right?) onto the command
line instead of the one provided by user.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

This function only queries domain @def. It doesn't change it.
Therefore it should take const pointer.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

The compiler can warn us if we add a value to the
virDomainChrSerialTargetType enumeration but forget to handle
it properly in the code. Let's take advantage of that.

This commit is best viewed with 'git diff -w'.
Signed-off-by: NAndrea Bolognani <abologna@redhat.com>
Reviewed-by: NPavel Hrdina <phrdina@redhat.com>

Add a separate capability for the sclplmconsole device, and check it
specifically instead of using QEMU_CAPS_DEVICE_SCLPCONSOLE for that too.
Signed-off-by: NPino Toscano <ptoscano@redhat.com>
Reviewed-by: NAndrea Bolognani <abologna@redhat.com>

Give a better name to the capability for the sclpconsole device.
Signed-off-by: NPino Toscano <ptoscano@redhat.com>
Reviewed-by: NAndrea Bolognani <abologna@redhat.com>

Up until now we assumed the spapr-vty device would always be
present, which is not very nice. Check for its availability before
using it instead.
Signed-off-by: NAndrea Bolognani <abologna@redhat.com>
Reviewed-by: NPavel Hrdina <phrdina@redhat.com>

This set of rules was proposed by Christian Boltz <apparmor@cboltz.de>
on https://bugzilla.opensuse.org/show_bug.cgi?id=1065123.

Current cleanup processing is ad-hoc at best - it's led to a couple of
strange and hard to diagnose timing problems and crashes.

So rather than perform cleanup in a somewhat random order, let's
perform cleanup in the exact opposite order of startup.

NB: It is possible that virNetlinkEventServerStart fails and we jump
to cleanup before driversInitialized has been set. That could leave
things inconsistent; however, resolution of that possibility is perhaps
more trouble than it's worth to handle.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

Let's be sure we can get a Daemon object before the server object.
This is a more "orderly" way to do things since the svr object would
be added to the dmn object afterwards.

Once we have forked the daemon successfully, let's claim the pidfile
immediately rather than waiting for setup of run_dir.

Signed-off-by: NMarc-André Lureau <marcandre.lureau@redhat.com>

Starting from qemu 2.11, the `-device vmcoreinfo` will create a fw_cfg
entry for a guest to store dump details, necessary to process kernel
dump with KASLR enabled and providing additional kernel details.

In essence, it is similar to -fw_cfg name=etc/vmcoreinfo,file=X but in
this case it is not backed by a file, but collected by QEMU itself.

Since the device is a singleton and shouldn't use additional hardware
resources, it is presented as a <feature> element in the libvirt
domain XML.

The device is arm/x86 only for now (targets that support fw_cfg+dma).

Related to:
https://bugzilla.redhat.com/show_bug.cgi?id=1395248Signed-off-by: NMarc-André Lureau <marcandre.lureau@redhat.com>

This doesn't add very much value for now, but future test for virresctrl will
take information from vircaps2xmldata (since it is dependent on the same info
then why duplicate it) and this particular use case helps us cover bit more of
the code regarding proper formatting and handling errors.  And one more test for
vircaps2xmltest doesn't hurt either.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

This patch modifies some not yet used test data so that the adding a test using
this data is a clean patch and not an addition of huge file with some
adjustments in small files that will be hidden in the middle of that commit.
These changes include:

- Add system dir in vircaps2xmldata/linux-caches

  Back when data for systems with resctrl support were added they had the
  /sys/fs/system directory put into a system/ subdir of the test and
  /sys/fs/resctrl in a resctrl/ subdir of that test.  However, if we also want a
  negative test for the resctrl (requesting allocation on a system that does not
  support resctrl), we need one a test case with any sensible (with cache info)
  system/ subdir and no resctrl/ one.  Easiest way is to add a
  system -> . symlink into existing test case.

- Change default group schemata for linux-resctrl and linux-resctrl-cdp

  That way we can fit some allocation in.

- Remove one cache from resctrl-skx's schemata and make some room for
  allocations

  That system already has only one cache, so that file was wrong anyway.  We
  have a version with 2 caches already (linux-resctrl-skx-twocaches), so this
  will also add variety to future tests.

- Add some empty allocation for resctrl-skx

  Just to have slightly more coverage and variety.  We can be sure nothing bad
  happens if such allocation exists in case we have that in the tests.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

Because the cache banks are initialized based on the order in which their
respective directories exist on the filesystem, they can appear in different
order.  This is here mainly for tests because the cache directory might have
different order of children nodes and tests would fail otherwise.  It should not
be the case with sysfs, but one can never be sure.  And this does not take
almost any extra time, mainly because it gets initialized once per driver.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

Sometimes the size of the bitmap matters and it might not be guessed correctly
when parsing from some type of input.  For example virBitmapNewData() has Byte
granularity, virBitmapNewString() has nibble granularity and so on.
virBitmapParseUnlimited() can be tricked into creating huge bitmap that's not
needed (e.g.: "0-2,^99999999").  This function provides a way to shrink the
bitmap.  It is not supposed to free any memory.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

Already introduced in the past with 9479642f, but then renamed to
virBitmapIntersect by a908e9e4.  This time we'll really use it.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

Our bitmaps can be represented as data (raw bytes for which we have
virBitmapNewData() and virBitmapToData()), human representation (list
of numbers in a string for which we have virBitmapParse() and
virBitmapFormat()) and hexadecimal string (for which we have only
virBitmapToString()).  So let's add the missing complement for the
last one so that we can parse hexadecimal strings.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

Truncate the output so that it is only as big as is needed to fit all
the bits, not all the units from the map.  This will be needed in the
future in order to properly format bitmaps for kernel's sysfs files.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

It is literally only a wrapper around virBitmapNewData() and
virBitmapFormat(), only the naming was wrong since it was introduced.
And because we have virBitmap*String functions where the meaning of
the 'String' is constant, this might confuse someone.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

This follows the virBitmapToData() function and, similarly to
virBitmapNewData(), we'll be able to have virBitmapNewString() later
on without name confusion.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

We can't output better memory sizes if we want to be compatible with libvirt
older than the one which introduced /memory/unit, but for new things we can just
output nicer capacity to the user if available.  And this function enables that.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

Currenty virTestInit() outputs all capabilities that it created when running
with VIR_TEST_DEBUG=1.  Since this is quite a lot of output for every call of
this function (and it is not needed until debugging a really deep-down issue)
let's just output the info when VIR_TEST_DEBUG is strictly greater than 1.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>
Reviewed-by: NPavel Hrdina <phrdina@redhat.com>

If _CFLAGS for a binary is not specified it uses AM_CFLAGS.  So doing

  $binary_CFLAGS = $(AM_CFLAGS)

or

  $binary_CFLAGS = $(AM_CFLAGS) $(something_that_is_already_in_AM_CFLAGS)

is pointless.  So remove it for cleaner Makefile.am
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>