Test if our parsing of interface stats as returned by ovs-vsctl
works as expected. To achieve this without having to mock
virCommand* I'm separating parsing of stats into a separate
function.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

We run 'ovs-vsctl' nine times (first to find if interface is
there and then eight times = for each stats member separately).
This is very inefficient. I've found a way to run it once and
with a bit of help from virJSON module we can parse out stats
we need.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

On Debian derived distros "localhost" can resolve to the normal
"127.0.0.1" and "::1", but it can also resolve to "127.0.1.1"

Rewrite the code so that it doesn't assume a fixed number of IPs.
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>
Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>

Signed-off-by: NIlias Stamatis <stamatis.iliass@gmail.com>
Reviewed-by: NErik Skultety <eskultet@redhat.com>

Typo meant we use 'nodedev' instead of 'interface'. This doesn't hurt
libvirtd because if a process tries to acquire a lock it already holds
it will succeed. It fails when nodedev & interface drivers are in
separate daemons though.
Reviewed-by: NErik Skultety <eskultet@redhat.com>
Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>

When the drivers acquire their pidfile lock we don't want to wait if the
lock is already held. We need the driver to immediately report error,
causing the daemon to exit.
Reviewed-by: NErik Skultety <eskultet@redhat.com>
Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>

Signed-off-by: NIlias Stamatis <stamatis.iliass@gmail.com>
Reviewed-by: NErik Skultety <eskultet@redhat.com>

Ideally, a software that's translating domain names would iterate
over all addresses the NSS returned, but some software does not
bother (e.g. ping). What happens is that for instance when
installing a guest, it's assigned one IP address but once it's
installed and rebooted it gets a different IP address (because
client ID used for the first DHCP traffic when installing the
guest was generated dynamically and never saved so after reboot
the guest generated new ID which resulted in different IP address
to be assigned). This results in 'ping $domain' not working
properly as it still pings the old IP address. Well, it might -
NSS plugin does not guarantee any order of addresses.

To resolve this problem, we can sort the array just before
returning it to the caller (ping) so that the newer IP addresses
come before older ones.
Reported-by: NAndrea Bolognani <abologna@redhat.com>
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NErik Skultety <eskultet@redhat.com>

In the nss plugin we have ERROR() macro which by default does
nothing. However, at compile time it can be made to report errors
(this is useful for debugging because by nature of NSS debugging
is hard). Anyway, the appendAddr() function uses @name (which
contains name the caller wants us to resolve) for error
reporting. But the caller findLeaseInJSON() is not passing it.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NErik Skultety <eskultet@redhat.com>

Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NErik Skultety <eskultet@redhat.com>

Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NErik Skultety <eskultet@redhat.com>

Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NErik Skultety <eskultet@redhat.com>

VHD images can be used as any other, so we should add them to the list
of types that virt-aa-helper can read when creating the per-guest rules
for backing files.
Signed-off-by: NChristian Ehrhardt <christian.ehrhardt@canonical.com>
Reviewed-by: NAndrea Bolognani <abologna@redhat.com>
Acked-by: NJamie Strandboge <jamie@canonical.com>

When validating a domain among all the checks there are two that
concern VIR_DOMAIN_LOADER_TYPE_PFLASH specifically. The first
check ensures that on x86 ACPI is enabled when UEFI is requested,
the second ensures that UEFI is used when ACPI is requested on
aarch64. However, check for UEFI is done by plain comparison of
def->os.loader->type which is insufficient because we have
def->os.firmware too.

NB, this wouldn't be a problem for active domain, because on
startup process def->os.loader->type gets filled by
qemuFirmwareEnableFeatures(), but that's not the case for
inactive domains.

Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1729604Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NAndrea Bolognani <abologna@redhat.com>

Split up the addition of a storage source into the following sub-steps:
1) storage access dependencies (TLS transport, persistent reservation)
2) storage acccess node (file/gluster/nbd...)
3) format driver dependencies (encryption secret)
4) format driver node (qcow2, raw, ...)

The functions split out will be later reused when implementing support
for 'blockdev-create' as we'll need the dependencies plugged in first,
then blockdev-create will be called and after that successfully finishes
blockdev-add will be added.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Add separate booleans for extracting VIR_DOMAIN_BLOCK_COPY_REUSE_EXT and
VIR_DOMAIN_BLOCK_COPY_SHALLOW from '@flags' and also change 'reuse' into
'existing'.

qemuMonitorDriveMirror requires the unmodified state of the flags to
pass to qemu and also we use the value a few times internally. Extract
it separately now.

The 'reuse' flag did not indicate reusing of the file as much as the
fact that the storage is existing and thus should not be created, so
modify the name to reflect this.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

With -blockdev it will be possible that a block job loses the disk that
was used to start it to a guest-initiated hot-unplug. Don't emit the
block job events in that case as we can't report the top level source or
disk target for an unplugged (and potentially replugged with different
source) disk.

Eventually when we add machinery for tracking jobs globally for a VM the
event will be reinstated via the domain job event.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

job->newstate is now used internally all the time so there's no need to
clear it as it already has correct value.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Update schema and configuration to allow specifying new video type of
'bochs'. Add implementation and tests for qemu.
Signed-off-by: NJonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>
Signed-off-by: NJán Tomko <jtomko@redhat.com>

Check whether qemu supports the bochs-display device and set a
capability. Update tests.
Signed-off-by: NJonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>
Signed-off-by: NJán Tomko <jtomko@redhat.com>

Add pool list type flag VIR_CONNECT_LIST_STORAGE_POOLS_ISCSI_DIRECT,
which was forgotten when introducing iscsi-direct pool at f0bf1be3.

https://bugzilla.redhat.com/show_bug.cgi?id=1726609Signed-off-by: NHan Han <hhan@redhat.com>
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>

Signed-off-by: NHan Han <hhan@redhat.com>
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>

Signed-off-by: NHan Han <hhan@redhat.com>
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>

Typo'd at file creation in commit 0c97dc41.
Signed-off-by: NEric Blake <eblake@redhat.com>

The code to check whether a redefined snapshot/checkpoint XML is
attempting to create a cycle in the list of moments is lengthy, and
common between the two types of list. Therefore, it belongs in the
shared base file.
Signed-off-by: NEric Blake <eblake@redhat.com>
Acked-by: NPeter Krempa <pkrempa@redhat.com>

With systemd activation the passed in file descriptors are required to
be numbered from STDERR_FILENO + 1 onwards. The unit tests thus require
FDs 3, 4 and 5 to be available.

This may not be the case in all environments in which the tests run. For
example on RHEL7 it was seen that a library constructor (gcrypt probably)
opens /dev/urandom and leaves the file handle open. This means FD 3 is
not available and the activation tests fail.

The best way to deal with this would be to create a standalone helper
program for the tests, but that's much more work than just skipping the
tests if we notice we have the problem.
Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>

The use of the virNetServerAutoShutdownFunc typedef was removed in

  commit 79b8a569
  Author: Daniel P. Berrange <berrange@redhat.com>
  Date:   Wed Oct 31 19:03:55 2012 +0000

    Replace polling for active VMs with signalling by drivers

This unused typedef was then copied into the virNetDaemon object
when that was split off from virNetServer, resulting in a typedef
virNetDaemonAutoShutdownFunc that has never been needed.
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>
Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>

The new systemd activation APIs mean there is no longer a need to get
the UNIX socket path associated with a plain FD.
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>
Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>

The virGetListenFDs method no longer needs to be called directly, so it
can be a static function internal to the systemd code.
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>
Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>

Using the new system activation APIs allows for simpler code setting up
the network services.
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>
Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>

Using the new system activation APIs allows for simpler code setting up
the network services.
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>
Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>

The only use of this code was removed by:

  commit be78814a
  Author: Michal Privoznik <mprivozn@redhat.com>
  Date:   Thu Apr 2 14:41:17 2015 +0200

    virNetSocketNewConnectUNIX: Use flocks when spawning a daemon

less than a year after it was first introduced in

  commit 1b807f92
  Author: Martin Kletzander <mkletzan@redhat.com>
  Date:   Wed Jul 16 08:00:19 2014 +0200

    rpc: pass listen FD to the daemon being started
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>
Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>

Certain libvirtd.conf settings are not honoured when using systemd
socket activation.

Certain systemd unit file settings must match those defined in
libvirtd.conf for systemd socket activation to work with systemd
version < 227, otherwise libvirtd cannot determine which inherited
FD to use for which service.
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>
Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>

Since we have socket activation available now, we can let the system
libvirtd exit when it is idle. This allows it to still do autostart
when the host boots up, but when nothing was started it will quickly
exit again until some mgmt app connects to the socket.
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>
Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>

We don't do socket activation of libvirtd, since we need to
unconditionally start libvirtd in order to perform autostart. This
doesn't mean we can't have systemd socket units. Some use cases will
not need libvirt's autostart & are thus free to use activation.
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>
Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>

The virNetServerServiceNewFDOrUNIX method cannot be correctly used when
dealing with systemd activation of a service which can receive more than
one socket FD as there is not guaranteed ordering of FDs.
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>
Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>

The current libvirtd code for systemd socket activation assumes socket
FDs are passed in the order unix-rw, unix-ro, unix-admin.  There is in
fact no ordering guarantee made by systemd. Applications are expected
to check the address or name associated with each FD to figure out its
identity.

This rewrites libvirtd to make use of the new systemd activation APIs
to make it robust wrt socket ordering changes.
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>
Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>

Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>
Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>

Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>
Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>

Currently code has to first create the service and then separately
register it with the server. If the socket associated with a particular
service is not passed from systemd we want to skip creating the service
altogether. This means we can't put the systemd activation logic into
the constructors for virNetServerService.

This patch thus creates some helper methods against virNetServer which
combine systemd activation, service creation and service registration
into one single operation. This operation is automatically a no-op if
systemd activation is present and no sockets were passed in.
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>
Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>