Add a new helper that sanitizes error semantics of base64_encode_alloc.

For a few cases where we handle secret information it's good to clear
the buffers containing sensitive data before freeing them.

Introduce VIR_DISPOSE, VIR_DISPOSE_N and VIR_DISPOSE_STRING that allow
simple clearing fo the buffers holding sensitive information on cleanup
paths.

Move some parts of virStorageFileRemoveLastPathComponent
into a separate function so they can be reused.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

This will be needed by the qemu driver in an upcoming patch.

For disks sources described by a libvirt volume we don't need to do a
complicated check since virStorageTranslateDiskSourcePool already
correctly determines the actual disk type.

Replace the checks using a new accessor that does not open-code the
whole logic.

Signed-off-by: NNikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>

Rather than reimplement it. This will be needed in upcoming patches

We had both and the only difference was that the latter also included
information about multifunction setting.  The problem with that was that
we couldn't use functions made for only one of the structs (e.g.
parsing).  To consolidate those two structs, use the one in virpci.h,
include that in domain_conf.h and add the multifunction member in it.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

When the domain definition describes a machine with NUMA, setting the
maximum vCPU count via the API might lead to an invalid config.

Add a check that will forbid this until we add more advanced cpu config
capabilities.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1327499

Add virDomainObjGetShortName() and use it.  For now that's used in one
place, but we should expose it so that future patches can use it.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

Introduce the final accessor's to _virSecretObject data and move the
structure from virsecretobj.h to virsecretobj.c

The virSecretObjSetValue logic will handle setting both the secret
value and the value_size. Some slight adjustments to the error path
over what was in secretSetValue were made.

Additionally, a slight logic change in secretGetValue where we'll
check for the internalFlags and error out before checking for
and erroring out for a NULL secret->value. That way, it won't be
obvious to anyone that the secret value wasn't set rather they'll
just know they cannot get the secret value since it's private.

Introduce fetch and set accessor to the secretObj->def field for usage
by the driver to avoid the driver needing to know the format of virSecretObj

Move and rename the secretRewriteFile, secretSaveDef, and secretSaveValue
from secret_driver to virsecretobj

Need to make some slight adjustments since the secretSave* functions
called secretEnsureDirectory, but otherwise mostly just a move of code.

Move and rename secretDeleteSaved from secret_driver into virsecretobj and
split it up into two parts since there is error path code that looks to
just delete the secret data file

Move to secret_conf.c and rename to virSecretLoadAllConfigs. Also includes
moving/renaming the supporting virSecretLoad, virSecretLoadValue, and
virSecretLoadValidateUUID.

This patch replaces most of the guts of secret_driver.c with recently
added secret_conf.c APIs in order manage secret lists and objects
using the hashed virSecretObjList* lookup API's.

Move the driver specific secretUsageIDForDef into secret_conf.c. It could
be more of a general purpose API.

It already labels abritrary paths, so it's just the naming that was
wrong.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

Since threadpool increments the current number of threads according to current
load, i.e. how many jobs are waiting in the queue. The count however, is
constrained by max and min limits of workers. The logic of this new API works
like this:
    1) setting the minimum
        a) When the limit is increased, depending on the current number of
           threads, new threads are possibly spawned if the current number of
           threads is less than the new minimum limit
        b) Decreasing the minimum limit has no possible effect on the current
           number of threads
    2) setting the maximum
        a) Icreasing the maximum limit has no immediate effect on the current
           number of threads, it only allows the threadpool to spawn more
           threads when new jobs, that would otherwise end up queued, arrive.
        b) Decreasing the maximum limit may affect the current number of
           threads, if the current number of threads is less than the new
           maximum limit. Since there may be some ongoing time-consuming jobs
           that would effectively block this API from killing any threads.
           Therefore, this API is asynchronous with best-effort execution,
           i.e. the necessary number of workers will be terminated once they
           finish their previous job, unless other workers had already
           terminated, decreasing the limit to the requested value.
    3) setting priority workers
        - both increase and decrease in count of these workers have an
          immediate impact on the current number of workers, new ones will be
          spawned or some of them get terminated respectively.
Signed-off-by: NErik Skultety <eskultet@redhat.com>

In order for the client to see all thread counts and limits, current total
and free worker count getters need to be introduced. Client might also be
interested in the job queue length, so provide a getter for that too. As with
the other getters, preparing for the admin interface, mutual exclusion is used
within all getters.
Signed-off-by: NErik Skultety <eskultet@redhat.com>

In a few places in libvirt we busy-wait for events, for example qemu
creating a monitor socket.  This is problematic because:

 - We need to choose a sufficiently small polling period so that
   libvirt doesn't add unnecessary delays.

 - We need to choose a sufficiently large polling period so that
   the effect of busy-waiting doesn't affect the system.

The solution to this conflict is to use an exponential backoff.

This patch adds two functions to hide the details, and modifies a few
places where we currently busy-wait.
Signed-off-by: NRichard W.M. Jones <rjones@redhat.com>

There are two places in qemu_domain_address.c where we have a switch
statement to convert PCI controller models
(VIR_DOMAIN_CONTROLLER_MODEL_PCI*) into the connection type flag that
is matched when looking for an upstream connection for that model of
controller (VIR_PCI_CONNECT_TYPE_*). This patch makes a utility
function in conf/domain_addr.c to do that, so that when a new PCI
controller is added, we only need to add the new model-->connect-type
in a single place.

Take setlocale/gettext error handling pattern from tools/virsh-*
and use it for all standalone binaries via a new shared
virGettextInitialize routine. The virsh* pattern differed slightly
from other callers. All users now consistently:

* Ignore setlocale errors. virsh has done this forever, presumably for
  good reason. This has been partially responsible for some bug reports:

  https://bugzilla.redhat.com/show_bug.cgi?id=1312688
  https://bugzilla.redhat.com/show_bug.cgi?id=1026514
  https://bugzilla.redhat.com/show_bug.cgi?id=1016158

* Report the failed function name
* Report strerror

commit 30c61901 added new functions to libvirt_private.syms
not alpabetically sorted and erroneously added vz sources to
STATEFUL_DRIVER_SOURCE_FILES, which triggered check-aclrules
running while vz driver isn't ready for it yet.

Pushing under build-breaker rule.
Signed-off-by: NMaxim Nestratov <mnestratov@virtuozzo.com>

Make it possible to build vz driver as a module and don't link it with
libvirt.so statically.
Remove registering it on client's side as far as we start relying on daemon
Signed-off-by: NMaxim Nestratov <mnestratov@virtuozzo.com>

Mock virNetDevRunEthernetScript instead.

This restores the VIR_TEST_REGENERATE_OUTPUT functionality.

Since we didn't opt to use one single event for device lifecycle for a
VM we are missing one last event if the device removal failed. This
event will be emitted once we asked to eject the device but for some
reason it is not possible.

Those are the last two places that uses the getter functions.  Use a
direct access instead and remove those getters.
Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

Removes the check for graphics type, it's not a public API and developer
know what he's doing and this check makes no sense.  It also removes
the ability to allocate a new array if there is none.  This was used by
the virDomainGraphicsListenAdd* functions and isn't used anymore.

This is now a simple getter with simple check for listens array presence
and whether the index in out of bounds.
Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

This effectively removes virDomainGraphicsListenSetAddress which was
used only to change the address of listen structure and possible change
the listen type.  The new function will auto-expand the listens array
and append a new listen.

The old function was used on pre-allocated array of listens and in most
cases it only "add" a new listen.  The two remaining uses can access the
listen structure directly.
Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

Commit id 'fb2bd208' essentially copied the qemuGetSecretString
creating an libxlGetSecretString.  Rather than have multiple copies
of the same code, create src/secret/secret_util.{c,h} files and
place the common function in there.

Modify the the build in order to build the module as a library
which is then pulled in by both the qemu and libxl drivers for
usage from both qemu_command.c and libxl_conf.c

Using the existing virUUIDGenerateRandomBytes, move API to virrandom.c
rename it to virRandomBytes and add it to libvirt_private.syms.

This will be used as a fallback for generating a domain master key.

In some cases it's impractical to use the regular APIs as the bitmap
size needs to be pre-declared. These new APIs allow to use bitmaps that
self expand.

The new code adds a property to the bitmap to track the allocation of
memory so that VIR_RESIZE_N can be used.

This patch implement a set of interfaces for perf event. Based on
these interfaces, we can implement internal driver API for perf,
and get the results of perf conuter you care about.
Signed-off-by: NQiaowei Ren <qiaowei.ren@intel.com>
Message-id: 1459171833-26416-4-git-send-email-qiaowei.ren@intel.com