In one of my previous patches (3a3c3780) I've tried to fix the
problem of nvram path disappearing on a domain that's been
started and shut down again. I fixed this by explicitly saving
domain's config file.  However, I did a bit of clumsy without
realizing we have a transient domains for which we don't save the
config file. Hence, any domain using UEFI became persistent.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
(cherry picked from commit 54ddc08d)

virStorageFileBackendGlusterInit did not check nhosts.

https://bugzilla.redhat.com/show_bug.cgi?id=1162974
(cherry picked from commit b66288fa)

Use the device type name if we know it instead of its number,
even if we can't hotplug it:
qemuMonitorJSONAttachCharDevCommand:6094 : operation failed: Unsupported
char device type '10'

(cherry picked from commit cce8e5f7)

virDomainChrSourceDefIsEqual should return 'true' for
identical SPICEVMC chardevs, and those that have no source
specification.

After this change, a failed hotplug no longer leaves a stale
pointer in the domain definition.

https://bugzilla.redhat.com/show_bug.cgi?id=1162097
(cherry picked from commit b987684f)

https://bugzilla.redhat.com/show_bug.cgi?id=1160084

As of b6d4dad1 (1.2.5) libvirt keeps track if domain disks have been
frozen. However, this falls into that set of information which don't
survive domain restart. Therefore, we need to clear the flag upon some
state transitions. Moreover, once we clear the flag we must update the
status file too.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
(cherry picked from commit 6ea54769)

When start a network fail, libvirt still call virNetworkEventLifecycleNew
to send a event.
Signed-off-by: NLuyao Huang <lhuang@redhat.com>
(cherry picked from commit 45d9ea5c)

A domain without a console quietly dies soon after start,
because we try to set /dev/null as a controlling TTY
2014-10-30 15:10:59.705+0000: 1: error : lxcContainerSetupFDs:283 :
ioctl(TIOCSCTTY) failed: Inappropriate ioctl for device

Report an error early instead of trying to start it.

https://bugzilla.redhat.com/show_bug.cgi?id=1155410
(cherry picked from commit 44686f65)

It fails after 30 seconds with this error:
error : virDBusCall:1429 : error from service: CanSuspend:
Did not receive a reply. Possible causes include: the remote
application did not send a reply, the message bus security
policy blocked the reply, the reply timeout expired, or the
network connection was broken.

Only probe for the power mgmt capabilities when driver is non-NULL.
This speeds up domain startup by 30 seconds.

https://bugzilla.redhat.com/show_bug.cgi?id=1159227
(cherry picked from commit 7ead1a5d)

Coverity found out the very obvious problem in the code.  That is that
virPidFileReleasePath() was called only if
virPidFileAcquirePath() returned 0.  But virPidFileAcquirePath() doesn't
return only 0 on success, but the FD that needs to be closed.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>
(cherry picked from commit 3f43bb83)

In qemuMigrationFinish mig->nbd can not be initialized by
qemuMigrationEatCookie without the QEMU_MIGRATION_COOKIE_NBD flag.
That causes qemuMigrationStopNBDServer to return early without
stopping the NBD server properly.
Signed-off-by: NWeiwei Li <nuonuoli@tencent.com>
Signed-off-by: NJán Tomko <jtomko@redhat.com>
(cherry picked from commit c3012a02)

When daemon is killed right in the middle of probing a qemu binary for
its capabilities, the qemu process is left running.  Next time the
daemon is starting, it cannot start the probing qemu process because the
one that's already running does have the pidfile flock()'d.
Reported-by: NWang Yufei <james.wangyufei@huawei.com>
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>
(cherry picked from commit 0ed1b55b)

This function is used to cleanup a pidfile doing whatever it takes, even
killing the owning process.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>
(cherry picked from commit d1fd086e)

Particularly in qemuBuildNumaArgStr(), there was a need for the advice
due to memory backing, which needs to know the nodeset it will be pinned
to.  With newer qemu this caused the following error when starting
domain:

  error: internal error: Advice from numad is needed in case of
  automatic numa placement

even when starting perfectly valid domain, e.g.:

  ...
  <vcpu placement='auto'>4</vcpu>
  <numatune>
    <memory mode='strict' placement='auto'/>
  </numatune>
  <cpu>
    <numa>
      <cell id='0' cpus='0' memory='524288'/>
      <cell id='1' cpus='1' memory='524288'/>
    </numa>
  </cpu>
  ...

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1138545Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>
(cherry picked from commit 11a48758)

commit 3e1e16aa (Use a port from the
migration range for NBD as well) changed ndb port allocation from
remotePorts to migrationPorts, but did not change the port releasing
process, which makes an error when migrating several times (above 64):
error: internal error: Unable to find an unused port in range
'migration' (49152-49215)

https://bugzilla.redhat.com/show_bug.cgi?id=1159245Signed-off-by: NWeiwei Li <nuonuoli@tencent.com>
Signed-off-by: NJán Tomko <jtomko@redhat.com>
(cherry picked from commit be598c5f)

https://bugzilla.redhat.com/show_bug.cgi?id=1140981 reports that
the qemu-kvm shipped as part of RHEL 7.0 intentionally[1] cripples
block jobs by removing the 'block-stream' QMP command, while still
leaving 'block-job-cancel' as an unusable no-op.  Meanwhile, we
already had existing code that checked whether block jobs were
completely missing (such as qemu 0.15), old style (cancel is
synchronous, and all commands spelled with '_'), or new style
(cancel is asynchronous, and all commands spelled with '-'), and
used that three-way probe to give decent error messages.  At the
time that code was added, all existing qemu versions fell in one
of three buckets, and the code was using the presence of
'block-job-cancel' as the witness of which of the three buckets.
But now that RHEL qemu has shipped with intentionally crippled
'block-stream', we have a fourth bucket, which results in ugly
error messages when trying 'virsh blockpull':

 error: Requested operation is not valid: Command 'block-stream' is not found

In reality, the fourth bucket should be treated the same as the
first bucket (no block job support); we can do that by realizing
that no existing build of qemu has working block-stream while
lacking block-job-cancel, so it is easiest to change our witness
to the command that starts a job rather than ends one.  We still
act correctly regarding command spelling and whether cancel is
asynchronous.  And on crippled RHEL builds, we now get the desired:

 error: unsupported configuration: block jobs not supported with this qemu binary

[1] The intentional cripple is limited to qemu-kvm of RHEL; when using
qemu-kvm-rhev of RHEV, block job functionality is supported.  Don't ask
me to explain the "why" behind it all - I'm just dealing with fallout
from someone else's decision.

* src/qemu/qemu_capabilities.h (QEMU_CAPS_BLOCKJOB_SYNC): Tweak comment.
* src/qemu/qemu_capabilities.c (virQEMUCapsCommands): Look for stream
rather than cancel when determining the flavor of block jobs supported.
Signed-off-by: NEric Blake <eblake@redhat.com>
(cherry picked from commit 00331bfb)

Add two test cases to verify that the helpers split and parse the
backing store components properly.

(cherry picked from commit 95a56835)

The code that parses the schema from the URI touches the "hosts[0]"
member of the storage file source structure in case the URI contains a
schema. The hosts array was not yet allocated at the point in the code
where the transport protocol was parsed and set. This lead to a crash of
libvirtd.

Fix the code by allocating the "hosts" array upfront and add a test case
to verify this scenario. (Unfortunately this requires shuffling the test
case numbers too).

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1156288
(cherry picked from commit 98784369)

Currently remote driver only initializes partial fields of
remote_connect_get_all_domain_stats_args. But xdr_array()
will check the uninitialised field 'doms_val'.
For safty reason, memset all fields of args is better.

Fix the following error from valgrind, like:
==30515== 1 errors in context 1 of 3:
==30515== Conditional jump or move depends on uninitialised value(s)
==30515==    at 0x85E9402: xdr_array (xdr_array.c:88)
==30515==    by 0x4FD8FC9: xdr_remote_connect_get_all_domain_stats_args (remote_protocol.c:6473)
==30515==    by 0x4FE72F2: virNetMessageEncodePayload (virnetmessage.c:350)
==30515==    by 0x4FDD21C: virNetClientProgramCall (virnetclientprogram.c:326)
==30515==    by 0x4FB4D01: callFull.isra.2 (remote_driver.c:6667)
==30515==    by 0x4FCBD45: call (remote_driver.c:6689)
==30515==    by 0x4FCBD45: remoteConnectGetAllDomainStats (remote_driver.c:7793)
==30515==    by 0x4FA0E75: virConnectGetAllDomainStats (libvirt.c:21678)
==30515==    by 0x147FD1: cmdDomstats (virsh-domain-monitor.c:2148)
==30515==    by 0x13006B: vshCommandRun (virsh.c:1915)
==30515==    by 0x12A9E1: main (virsh.c:3699)
Signed-off-by: NJincheng Miao <jmiao@redhat.com>
(cherry picked from commit 28b7601d)

Not every error message from qemu-ga has to have the 'class' field
filled out. For instance, I've seen this error message lately:

  qemuAgentCheckError:1047 : unable to execute QEMU agent command \
  {"execute":"guest-set-time"}: \
  {"error":{"desc":"Invalid parameter type, expected: integer"}}

However, this got translated into rather generic error message:

  internal error: unable to execute QEMU agent command
  'guest-set-time': unknown QEMU command error

So we've dropped better error message in favor of a generic one.
This is due to our code which expects 'class' which is not
present here.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
(cherry picked from commit b7fe5a65)

https://bugzilla.redhat.com/show_bug.cgi?id=956506 documents that
given a domain where an internal snapshot parent has an external
snapshot child, we lacked a safety check when trying to use the
--children-only option to snapshot-delete:

$ virsh start dom
$ virsh snapshot-create-as dom internal
$ virsh snapshot-create-as dom external --disk-only
$ virsh snapshot-delete dom external
error: Failed to delete snapshot external
error: unsupported configuration: deletion of 1 external disk snapshots not supported yet
$ virsh snapshot-delete dom internal --children
error: Failed to delete snapshot internal
error: unsupported configuration: deletion of 1 external disk snapshots not supported yet
$ virsh snapshot-delete dom internal --children-only
Domain snapshot internal children deleted

While I'd still like to see patches that actually do proper external
snapshot deletion, we should at least fix the inconsistency in the
meantime.  With this patch:

$ virsh snapshot-delete dom internal --children-only
error: Failed to delete snapshot internal
error: unsupported configuration: deletion of 1 external disk snapshots not supported yet

* src/qemu/qemu_driver.c (qemuDomainSnapshotDelete): Fix condition.
Signed-off-by: NEric Blake <eblake@redhat.com>
(cherry picked from commit 2086a990)

In a clean build system (Ubuntu 14.04), the viridentitytest failed to compile.
Even if all the SELINUX libraries and depedencies are installed. See the error
message below:

[...]
  CC       viridentitytest.o
  CCLD     viridentitytest
/usr/bin/ld: viridentitytest.o: undefined reference to symbol
                                                       'security_disable'
//lib/x86_64-linux-gnu/libselinux.so.1: error adding symbols: DSO missing
                                                           from command line
collect2: error: ld returned 1 exit status
make: *** [viridentitytest] Error 1

Simply adding the variable SELINUX_LIBS in viridentitytest rules of
Makefile.am to include SELINUX libraries into viridentitytest solved that
compilation issue.
Signed-off-by: NJulio Faracco <jcfaracco@gmail.com>
Signed-off-by: NEric Blake <eblake@redhat.com>
(cherry picked from commit f2a2d0e9)

Also consider whitespace only strings returned from the hook as empty
result.

(cherry picked from commit 19b1ee42)

The documentation for the restore hook states that returning an empty
XML is equivalent with copying the input. There was a bug in the code
checking the returned string by checking the string instead of the
contents. Use the new helper to check if the string is empty.

(cherry picked from commit e3867799)

The helper checks whether a string contains only whitespace or is NULL.
This will be helpful to skip cases where a user string is optional, but
may be provided empty with the same meaning.

(cherry picked from commit 0eeafeed)

Few places still used hardcoded limit for maximum XML size for commands
that accept XML files. The hardcoded limits ranged from 8k to 1M. Use
VSH_MAX_XML_FILE to express this limit in a unified way. This will bump
the limit for the commands that used hardcoded string lengths to 10M.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1152427
(cherry picked from commit 4d1852c4)

https://bugzilla.redhat.com/show_bug.cgi?id=1141732

Introduced by commit id '8f76ad99' the logic to detach a scsi_host
device (SCSI or iSCSI) fails when attempting to remove the 'drive'
because as I found in my investigation - the DelDevice takes care of
that for us.

The investigation turned up commits to adjust the logic for the
qemuMonitorDelDevice and qemuMonitorDriveDel processing for interfaces
(commit id '81f76598'), disk bus=VIRTIO,SCSI,USB (commit id '0635785b'),
and chr devices (commit id '55b21f9b'), but nothing with the host devices.

This commit uses the model for the previous set of changes and applies
it to the hostdev path. The call to qemuDomainDetachHostSCSIDevice will
return to qemuDomainDetachThisHostDevice handling either the audit of
the failure or the wait for the removal and then call into
qemuDomainRemoveHostDevice for the event, removal from the domain hostdev
list, and audit of the removal similar to other paths.

NOTE: For now the 'conn' param to +qemuDomainDetachHostSCSIDevice is left
as ATTRIBUTE_UNUSED.  Removing requires a cascade of other changes to be
left for a future patch.

(cherry picked from commit d2774e54)

Commit 4882618e added the code that
requests driver cfg, but forgot to unref it.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>
(cherry picked from commit 9661ac2f)

Fix the build on FreeBSD, broken by commit 4882618e.
Signed-off-by: NJán Tomko <jtomko@redhat.com>
(cherry picked from commit 99b2b457)

If we don't properly clean up all processes in the
machine-<vmname>.scope systemd won't remove the cgroup and subsequent vm
starts fail with

  'CreateMachine: File exists'

Additional processes can e.g. be added via

  echo $PID > /sys/fs/cgroup/systemd/machine.slice/machine-${VMNAME}.scope/tasks

but there are other cases like

  http://bugs.debian.org/761521

Invoke TerminateMachine to be on the safe side since systemd tracks the
cgroup anyway. This is a noop if all processes have terminated already.

(cherry picked from commit 4882618e)

Since commit 8eb55d782a2b9afacc7938694891cc6fad7b42a5 libxml2 removes
two slashes from the URI when there is no server part.  This is fixed
with beb7281055dbf0ed4d041022a67c6c5cfd126f25, but only if the calling
application calls xmlSaveUri() on URI that xmlURIParse() parsed.  And
that is not the case in virURIFormat().  virURIFormat() accepts
virURIPtr that can be created without parsing it and we do that when we
format network storage paths for gluster for example.  Even though
virStorageSourceParseBackingURI() uses virURIParse(), it throws that data
structure right away.

Since we want to format URIs as URIs and not absolute URIs or opaque
URIs (see RFC 3986), we can specify that with a special hack thanks to
commit beb7281055dbf0ed4d041022a67c6c5cfd126f25, by setting port to -1.

This fixes qemuxml2argvtest test where the disk-drive-network-gluster
case was failing.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>
(cherry picked from commit 8f17d0ea)

https://bugzilla.redhat.com/show_bug.cgi?id=1147057

The code for relabelling the TAP FD is there due to a race. When
libvirt creates a /dev/tapN device it's labeled as
'system_u:object_r:device_t:s0' by default. Later, when
udev/systemd reacts to this device, it's relabelled to the
expected label 'system_u:object_r:tun_tap_device_t:s0'. Hence, we
have a code that relabels the device, to cut the race down. For
more info see ae368ebf.

But the problem is, the relabel function is called on all TUN/TAP
devices. Yes, on /dev/net/tun too. This is however a special kind
of device - other processes uses it too. We shouldn't touch it's
label then.

Ideally, there would an API in SELinux that would label just the
passed FD and not the underlying path. That way, we wouldn't need
to care as we would be not labeling /dev/net/tun but the FD
passed to the domain. Unfortunately, there's no such API so we
have to workaround until then.
Tested-by: NRichard W.M. Jones <rjones@redhat.com>
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
(cherry picked from commit ebc05263)

virNetDevLinkDump() gets a message from netlink into "resp", then
calls nlmsg_parse() to fill the table "tb" with pointers into resp. It
then returns tb to its caller, but not before freeing the buffer at
resp. That means that all the callers of virNetDevLinkDump() are
examining memory that has already been freed. This can be verified by
filling the buffer at resp with garbage prior to freeing it (or, I
suppose, just running libvirtd under valgrind) then performing some
operation that calls virNetDevLinkDump().

The upstream commit log incorrectly states that the code has been like
this ever since virNetDevLinkDump() was written. In reality, the
problem was introduced with commit e95de74d, first in libvirt-1.0.5,
which was attempting to eliminate a typecast that caused compiler
warnings. It has only been pure luck (or maybe a lack of heavy load,
and/or maybe an allocation algorithm in malloc() that delays re-use of
just-freed memory) that has kept this from causing errors, for example
when configuring a PCI passthrough or macvtap passthrough network
interface.

The solution taken in this patch is the simplest - just return resp to
the caller along with tb, then have the caller free it after they are
finished using the data (pointers) in tb. I alternately could have
made a cleaner interface by creating a new struct that put tb and resp
together along with a vir*Free() function for it, but this function is
only used in a couple places, and I'm not sure there will be
additional new uses of virNetDevLinkDump(), so the value of adding a
new type, extra APIs, etc. is dubious.

(cherry picked from commit f9f9699f)

Commit 28f8dfdc (v1.0.0) introduced a security hole: in at least
the qemu implementation of virDomainGetXMLDesc, the use of the
flag VIR_DOMAIN_XML_MIGRATABLE (which is usable from a read-only
connection) triggers the implicit use of VIR_DOMAIN_XML_SECURE
prior to calling qemuDomainFormatXML.  However, the use of
VIR_DOMAIN_XML_SECURE is supposed to be restricted to read-write
clients only.  This patch treats the migratable flag as requiring
the same permissions, rather than analyzing what might break if
migratable xml no longer includes secret information.

Fortunately, the information leak is low-risk: all that is gated
by the VIR_DOMAIN_XML_SECURE flag is the VNC connection password;
but VNC passwords are already weak (FIPS forbids their use, and
on a non-FIPS machine, anyone stupid enough to trust a max-8-byte
password sent in plaintext over the network deserves what they
get).  SPICE offers better security than VNC, and all other
secrets are properly protected by use of virSecret associations
rather than direct output in domain XML.

* src/remote/remote_protocol.x (REMOTE_PROC_DOMAIN_GET_XML_DESC):
Tighten rules on use of migratable flag.
* src/libvirt-domain.c (virDomainGetXMLDesc): Likewise.
Signed-off-by: NEric Blake <eblake@redhat.com>
(cherry picked from commit b1674ad5)

Conflicts:
	src/libvirt-domain.c - file split from older src/libvirt.c
Signed-off-by: NEric Blake <eblake@redhat.com>

virt-manager on Fedora sets up i686 hosts with "/usr/bin/qemu-kvm" emulator,
which in turn unconditionally execs qemu-system-x86_64 querying capabilities
then fails:

Error launching details: invalid argument: architecture from emulator 'x86_64' doesn't match given architecture 'i686'

Traceback (most recent call last):
  File "/usr/share/virt-manager/virtManager/engine.py", line 748, in _show_vm_helper
    details = self._get_details_dialog(uri, vm.get_connkey())
  File "/usr/share/virt-manager/virtManager/engine.py", line 726, in _get_details_dialog
    obj = vmmDetails(conn.get_vm(connkey))
  File "/usr/share/virt-manager/virtManager/details.py", line 399, in __init__
    self.init_details()
  File "/usr/share/virt-manager/virtManager/details.py", line 784, in init_details
    domcaps = self.vm.get_domain_capabilities()
  File "/usr/share/virt-manager/virtManager/domain.py", line 518, in get_domain_capabilities
    self.get_xmlobj().os.machine, self.get_xmlobj().type)
  File "/usr/lib/python2.7/site-packages/libvirt.py", line 3492, in getDomainCapabilities
    if ret is None: raise libvirtError ('virConnectGetDomainCapabilities() failed', conn=self)
libvirtError: invalid argument: architecture from emulator 'x86_64' doesn't match given architecture 'i686'

Journal:

Oct 16 21:08:26 goatlord.localdomain libvirtd[1530]: invalid argument: architecture from emulator 'x86_64' doesn't match given architecture 'i686'

(cherry picked from commit afe8f420)

Right now when building the qemu command line, we try to do various
unconditional validations of the guest CPU against the host CPU. However
this checks are overly applied. The only time we should use the checks
are:

- The user requests host-model/host-passthrough, or

- When KVM is requsted. CPU features requested in TCG mode are always
  emulated by qemu and are independent of the host CPU, so no host CPU
  checks should be performed.

Right now if trying to specify a CPU for arm on an x86 host, it attempts
to do non-sensical validation and falls over.

Switch all the test cases that were intending to test CPU validation to
use KVM, so they continue to test the intended code.

Amend some aarch64 XML tests with a CPU model, to ensure things work
correctly.

(cherry picked from commit cf7fce8f2fd1c930f357fd4ff93ac35f38eb30c6)

Move the CPU mode/model handling to its own function. This is just
code movement and re-indentation.

(cherry picked from commit e1d872dc77c80d43036f928f83f560f2e9286148)

* docs/news.html.in libvirt.spec.in: update for release
* po/*.po*: updated localizations and regenerated

If you use public api virConnectListAllDomains() with second parameter
set to NULL to get only the number of domains you will lock out all
other operations with domains.

Introduced by commit 2c680804.
Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

This removes the artificial and unnecessary restriction that
virDomainSetMaxDowntime() only be called while a migration is in
progress.

https://bugzilla.redhat.com/show_bug.cgi?id=1146618Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

FreeBSD's compiler complains that we shadow the symbol. Sigh.

s/devname/dev_name/