Commit e3ef20d7 allows user to configure migration ports range via
qemu.conf. However, it forgot to update augeas definition file and
even the test data was malicious.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
(cherry picked from commit d9be5a71)

Conflicts:
  missing support for changing migration listen_address

	src/qemu/libvirtd_qemu.aug
	src/qemu/test_libvirtd_qemu.aug.in

https://bugzilla.redhat.com/show_bug.cgi?id=1019053
(cherry picked from commit e3ef20d7)

Conflicts:
  missing support for changing the migration listen address

	src/qemu/qemu.conf
	src/qemu/qemu_conf.c
	src/qemu/qemu_conf.h
	src/qemu/test_libvirtd_qemu.aug.in

https://bugzilla.redhat.com/show_bug.cgi?id=1019053

When we migrate vms concurrently, there's a chance that libvirtd on
destination assigns the same port for different migrations, which will
lead to migration failure during prepare phase on destination. So we use
virPortAllocator here to solve the problem.
Signed-off-by: NWang Yufei <james.wangyufei@huawei.com>
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>
(cherry picked from commit 0196845d)

Conflicts:
  missing support for WebSockets and listen address
  virAsprintf doesn't report OOM

	src/qemu/qemu_command.h
	src/qemu/qemu_conf.h
	src/qemu/qemu_driver.c
	src/qemu/qemu_migration.c

Whenever virPortAllocatorRelease is called with port == 0, it complains
that the port is not in an allowed range, which is expectable as the
port was never allocated. Let's make virPortAllocatorRelease ignore 0
ports in a similar way free() ignores NULL pointers.

(cherry picked from commit 86dba8f3)

Conflicts:
  missing VNC websocket support
	src/qemu/qemu_process.c

The function doesn't check whether the request is made for active or
inactive domain.  Thus when the domain is not running it still tries
accessing non-existing cgroups (priv->cgroup, which is NULL).

I re-made the function in order for it to work the same way it's qemu
counterpart does.

Reproducer:
 1) Define an LXC domain
 2) Do 'virsh memtune <domain> --hard-limit 133T'

Backtrace:
 Thread 6 (Thread 0x7fffec8c0700 (LWP 26826)):
 #0  0x00007ffff70edcc4 in virCgroupPathOfController (group=0x0, controller=3,
     key=0x7ffff75734bd "memory.limit_in_bytes", path=0x7fffec8bf718) at util/vircgroup.c:1764
 #1  0x00007ffff70e9206 in virCgroupSetValueStr (group=0x0, controller=3,
     key=0x7ffff75734bd "memory.limit_in_bytes", value=0x7fffe409f360 "1073741824")
     at util/vircgroup.c:669
 #2  0x00007ffff70e98b4 in virCgroupSetValueU64 (group=0x0, controller=3,
     key=0x7ffff75734bd "memory.limit_in_bytes", value=1073741824) at util/vircgroup.c:740
 #3  0x00007ffff70ee518 in virCgroupSetMemory (group=0x0, kb=1048576) at util/vircgroup.c:1904
 #4  0x00007ffff70ee675 in virCgroupSetMemoryHardLimit (group=0x0, kb=1048576)
     at util/vircgroup.c:1944
 #5  0x00005555557d54c8 in lxcDomainSetMemoryParameters (dom=0x7fffe40cc420,
     params=0x7fffe409f100, nparams=1, flags=0) at lxc/lxc_driver.c:774
 #6  0x00007ffff72c20f9 in virDomainSetMemoryParameters (domain=0x7fffe40cc420,
     params=0x7fffe409f100, nparams=1, flags=0) at libvirt.c:4051
 #7  0x000055555561365f in remoteDispatchDomainSetMemoryParameters (server=0x555555eb7e00,
     client=0x555555ec4b10, msg=0x555555eb94e0, rerr=0x7fffec8bfb70, args=0x7fffe40b8510)
     at remote_dispatch.h:7621
 #8  0x00005555556133fd in remoteDispatchDomainSetMemoryParametersHelper (server=0x555555eb7e00,
     client=0x555555ec4b10, msg=0x555555eb94e0, rerr=0x7fffec8bfb70, args=0x7fffe40b8510,
     ret=0x7fffe40b84f0) at remote_dispatch.h:7591
 #9  0x00007ffff73b293f in virNetServerProgramDispatchCall (prog=0x555555ec3ae0,
     server=0x555555eb7e00, client=0x555555ec4b10, msg=0x555555eb94e0)
     at rpc/virnetserverprogram.c:435
 #10 0x00007ffff73b207f in virNetServerProgramDispatch (prog=0x555555ec3ae0,
     server=0x555555eb7e00, client=0x555555ec4b10, msg=0x555555eb94e0)
     at rpc/virnetserverprogram.c:305
 #11 0x00007ffff73a4d2c in virNetServerProcessMsg (srv=0x555555eb7e00, client=0x555555ec4b10,
     prog=0x555555ec3ae0, msg=0x555555eb94e0) at rpc/virnetserver.c:165
 #12 0x00007ffff73a4e8d in virNetServerHandleJob (jobOpaque=0x555555ec3e30, opaque=0x555555eb7e00)
     at rpc/virnetserver.c:186
 #13 0x00007ffff7187f3f in virThreadPoolWorker (opaque=0x555555eb7ac0) at util/virthreadpool.c:144
 #14 0x00007ffff718733a in virThreadHelper (data=0x555555eb7890) at util/virthreadpthread.c:161
 #15 0x00007ffff468ed89 in start_thread (arg=0x7fffec8c0700) at pthread_create.c:308
 #16 0x00007ffff3da26bd in clone () at ../sysdeps/unix/sysv/linux/x86_64/clone.S:113
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>
(cherry picked from commit 9faf3f29)

Conflicts:
	src/lxc/lxc_driver.c

The function doesn't check whether the request is made for active or
inactive domain.  Thus when the domain is not running it still tries
accessing non-existing cgroups (priv->cgroup, which is NULL).

I re-made the function in order for it to work the same way it's qemu
counterpart does.

Reproducer:
 1) Define an LXC domain
 2) Do 'virsh memtune <domain>'

Backtrace:
 Thread 6 (Thread 0x7fffec8c0700 (LWP 13387)):
 #0  0x00007ffff70edcc4 in virCgroupPathOfController (group=0x0, controller=3,
     key=0x7ffff75734bd "memory.limit_in_bytes", path=0x7fffec8bf750) at util/vircgroup.c:1764
 #1  0x00007ffff70e958c in virCgroupGetValueStr (group=0x0, controller=3,
     key=0x7ffff75734bd "memory.limit_in_bytes", value=0x7fffec8bf7c0) at util/vircgroup.c:705
 #2  0x00007ffff70e9d29 in virCgroupGetValueU64 (group=0x0, controller=3,
     key=0x7ffff75734bd "memory.limit_in_bytes", value=0x7fffec8bf810) at util/vircgroup.c:804
 #3  0x00007ffff70ee706 in virCgroupGetMemoryHardLimit (group=0x0, kb=0x7fffec8bf8a8)
     at util/vircgroup.c:1962
 #4  0x00005555557d590f in lxcDomainGetMemoryParameters (dom=0x7fffd40024a0,
     params=0x7fffd40027a0, nparams=0x7fffec8bfa24, flags=0) at lxc/lxc_driver.c:826
 #5  0x00007ffff72c28d3 in virDomainGetMemoryParameters (domain=0x7fffd40024a0,
     params=0x7fffd40027a0, nparams=0x7fffec8bfa24, flags=0) at libvirt.c:4137
 #6  0x000055555563714d in remoteDispatchDomainGetMemoryParameters (server=0x555555eb7e00,
     client=0x555555ebaef0, msg=0x555555ebb3e0, rerr=0x7fffec8bfb70, args=0x7fffd40024e0,
     ret=0x7fffd4002420) at remote.c:1895
 #7  0x00005555556052c4 in remoteDispatchDomainGetMemoryParametersHelper (server=0x555555eb7e00,
     client=0x555555ebaef0, msg=0x555555ebb3e0, rerr=0x7fffec8bfb70, args=0x7fffd40024e0,
     ret=0x7fffd4002420) at remote_dispatch.h:4050
 #8  0x00007ffff73b293f in virNetServerProgramDispatchCall (prog=0x555555ec3ae0,
     server=0x555555eb7e00, client=0x555555ebaef0, msg=0x555555ebb3e0)
     at rpc/virnetserverprogram.c:435
 #9  0x00007ffff73b207f in virNetServerProgramDispatch (prog=0x555555ec3ae0,
     server=0x555555eb7e00, client=0x555555ebaef0, msg=0x555555ebb3e0)
     at rpc/virnetserverprogram.c:305
 #10 0x00007ffff73a4d2c in virNetServerProcessMsg (srv=0x555555eb7e00, client=0x555555ebaef0,
     prog=0x555555ec3ae0, msg=0x555555ebb3e0) at rpc/virnetserver.c:165
 #11 0x00007ffff73a4e8d in virNetServerHandleJob (jobOpaque=0x555555ebc7e0, opaque=0x555555eb7e00)
     at rpc/virnetserver.c:186
 #12 0x00007ffff7187f3f in virThreadPoolWorker (opaque=0x555555eb7ac0) at util/virthreadpool.c:144
 #13 0x00007ffff718733a in virThreadHelper (data=0x555555eb7890) at util/virthreadpthread.c:161
 #14 0x00007ffff468ed89 in start_thread (arg=0x7fffec8c0700) at pthread_create.c:308
 #15 0x00007ffff3da26bd in clone () at ../sysdeps/unix/sysv/linux/x86_64/clone.S:113
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>
(cherry picked from commit f8c1cb90)

Conflicts:
	src/lxc/lxc_driver.c

The array of sasl_callback_t callbacks which is passed to sasl_client_new()
must be kept alive as long as the created sasl_conn_t object is alive as
cyrus-sasl uses this structure internally for things like logging, so
the memory used for callbacks must only be freed after sasl_dispose() has
been called.

During testing of successful SASL logins with
virsh -c qemu+tls:///system list --all
I've been getting invalid read reports from valgrind

==9237== Invalid read of size 8
==9237==    at 0x6E93B6F: _sasl_getcallback (common.c:1745)
==9237==    by 0x6E95430: _sasl_log (common.c:1850)
==9237==    by 0x16593D87: digestmd5_client_mech_dispose (digestmd5.c:4580)
==9237==    by 0x6E91653: client_dispose (client.c:332)
==9237==    by 0x6E9476A: sasl_dispose (common.c:851)
==9237==    by 0x4E225A1: virNetSASLSessionDispose (virnetsaslcontext.c:678)
==9237==    by 0x4CBC551: virObjectUnref (virobject.c:262)
==9237==    by 0x4E254D1: virNetSocketDispose (virnetsocket.c:1042)
==9237==    by 0x4CBC551: virObjectUnref (virobject.c:262)
==9237==    by 0x4E2701C: virNetSocketEventFree (virnetsocket.c:1794)
==9237==    by 0x4C965D3: virEventPollCleanupHandles (vireventpoll.c:583)
==9237==    by 0x4C96987: virEventPollRunOnce (vireventpoll.c:652)
==9237==    by 0x4C94730: virEventRunDefaultImpl (virevent.c:274)
==9237==    by 0x12C7BA: vshEventLoop (virsh.c:2407)
==9237==    by 0x4CD3D04: virThreadHelper (virthreadpthread.c:161)
==9237==    by 0x7DAEF32: start_thread (pthread_create.c:309)
==9237==    by 0x8C86EAC: clone (clone.S:111)
==9237==  Address 0xe2d61b0 is 0 bytes inside a block of size 168 free'd
==9237==    at 0x4A07577: free (in /usr/lib64/valgrind/vgpreload_memcheck-amd64-linux.so)
==9237==    by 0x4C73827: virFree (viralloc.c:580)
==9237==    by 0x4DE4BC7: remoteAuthSASL (remote_driver.c:4219)
==9237==    by 0x4DE33D0: remoteAuthenticate (remote_driver.c:3639)
==9237==    by 0x4DDBFAA: doRemoteOpen (remote_driver.c:832)
==9237==    by 0x4DDC8DC: remoteConnectOpen (remote_driver.c:1031)
==9237==    by 0x4D8595F: do_open (libvirt.c:1239)
==9237==    by 0x4D863F3: virConnectOpenAuth (libvirt.c:1481)
==9237==    by 0x12762B: vshReconnect (virsh.c:337)
==9237==    by 0x12C9B0: vshInit (virsh.c:2470)
==9237==    by 0x12E9A5: main (virsh.c:3338)

This commit changes virNetSASLSessionNewClient() to take ownership of the SASL
callbacks. Then we can free them in virNetSASLSessionDispose() after the corresponding
sasl_conn_t has been freed.

(cherry picked from commit 13fdc6d6)

The previous attempt (commit d65e0e14) removed just one of two
libvirt-guests restarts that happened on libvirt-client update. Let's
remove the last one too :-)

https://bugzilla.redhat.com/show_bug.cgi?id=962225Signed-off-by: NJiri Denemark <jdenemar@redhat.com>
(cherry picked from commit 604f79b3)

This Python interface code is returning a -1 on errors for the
`baselineCPU' API.  Since this API is supposed to return a pointer
the error return value should really be VIR_PY_NONE.

NB:  I've checked all the other APIs in this file and this is the
only pointer API that is returning -1.
Signed-off-by: NDon Dugger <donald.d.dugger@intel.com>

(crobinso: Upstream in libvirt-python.git)

Restarting an active libvirt-guests.service is the equivalent of
doing:

/usr/libexec/libvirt-guests.sh stop
/usr/libexec/libvirt-guests.sh start

Which in a default configuration will managedsave every running VM,
and then restore them. Certainly not something we should do every
time the libvirt-client RPM is updated.

Just drop the try-restart attempt, I don't know what purpose it
serves anyways.

https://bugzilla.redhat.com/show_bug.cgi?id=962225
(cherry picked from commit d65e0e14)

If the host side of an LXC container console disconnected
and the guest side continued to write data, until the PTY
buffer filled up, the LXC controller would busy wait. It
would repeatedly see POLLHUP from poll() and not disable
the watch.

This was due to some bogus logic detecting blocking
conditions. Upon seeing a POLLHUP we must disable all
reading & writing from the PTY, and setup the epoll to
wake us up again when the connection comes back.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
(cherry picked from commit 5087a5a0)

Possible fix for occasional libvirt-guests failure at boot time:

https://bugzilla.redhat.com/show_bug.cgi?id=906009
(cherry picked from commit d9203675)

Syslog is socket activated since at least systemd v35 so we can drop
this dependency. Debian's linitian otherwise complains about it.

References:

    http://www.freedesktop.org/wiki/Software/systemd/syslog/
    http://lintian.debian.org/tags/systemd-service-file-refers-to-obsolete-target.html

(cherry picked from commit 3c9e40a1)

Rather than casting the virBitmap pointer to uint8_t* and then using
the structure contents as a byte array, use the virBitmap API to determine
the bitmap size and test each bit.
Signed-off-by: NJeremy Fitzhardinge <jeremy@goop.org>
(cherry picked from commit ba1bf100)

This should resolve:

  https://bugzilla.redhat.com/show_bug.cgi?id=1012085

libvirt previously recognized NFS, GFS2, OCFS2, and AFS filesystems as
"shared", and thus eligible for exceptions to certain rules/actions
about chowning image files before handing them off to a guest. This
patch widens the definition of "shared filesystem" to include SMB and
CIFS filesystems (aka "Windows file sharing"); both of these use the
same protocol, but different drivers so there are different magic
numbers for each.

(cherry picked from commit e4e73337)

When opening a new connection to the driver, nwfilterOpen
only succeeds if the driverState has been allocated.

Move the privilege check in driver initialization before
the state allocation to disable the driver.

This changes the nwfilter-define error from:
error: cannot create config directory (null): Bad address
To:
this function is not supported by the connection driver:
virNWFilterDefineXML

https://bugzilla.redhat.com/show_bug.cgi?id=1029266
(cherry picked from commit b7829f95)

Our configure.ac says:

    Not all versions of gnutls include -lgcrypt, and so we add
    it explicitly for the calls to gcry_control/check_version

Thus we cannot rely on gnutls-devel to bring grcypt-devel as a
dependency.

(cherry picked from commit 3b50a711)

Since 16bcb3 we have a regression. The hard_limit is set
unconditionally. By default the limit is zero. Hence, if user hasn't
configured any, we set the zero in cgroup subsystem making the kernel
kill the corresponding qemu process immediately. The proper fix is to
set hard_limit iff user has configured any.

(cherry picked from commit 94a24dd3)

Conflicts:
	src/qemu/qemu_cgroup.c

This function is to guess the correct limit for maximal memory
usage by qemu for given domain. This can never be guessed
correctly, not to mention all the pains and sleepless nights this
code has caused. Once somebody discovers algorithm to solve the
Halting Problem, we can compute the limit algorithmically. But
till then, this code should never see the light of the release
again.

(cherry picked from commit 16bcb3b6)

Conflicts:
	src/qemu/qemu_cgroup.c
	src/qemu/qemu_command.c
	src/qemu/qemu_domain.c
	src/qemu/qemu_domain.h
	src/qemu/qemu_hotplug.c

Introduced by 7b87a3
When I quit the process which only register VIR_DOMAIN_EVENT_ID_REBOOT,
I got error like:
"libvirt: XML-RPC error : internal error: domain event 0 not registered".
Then I add the following code, it fixed.
Signed-off-by: NZhou Yimin <zhouyimin@huawei.com>
Signed-off-by: NEric Blake <eblake@redhat.com>
(cherry picked from commit 9712c251)

Commit a0b6a36f "fixed" what abfff210 broke (URI precedence), but
there was still one more thing missing to fix.  When using virsh
parameters to setup debugging, those weren't honored, because at the
time debugging was initializing, arguments weren't parsed yet.  To
make ewerything work as expected, we need to initialize the debugging
twice, once before debugging (so we can debug option parsing properly)
and then again after these options are parsed.

As a side effect, this patch also fixes a leak when virsh is ran with
multiple '-l' parameters.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>
(cherry picked from commit ac43da70)

Commit abfff210 changed the order of vshParseArgv() and vshInit() in
order to make fix debugging of parameter parsing.  However, vshInit()
did a vshReconnect() even though ctl->name wasn't set according to the
'-c' parameter yet.  In order to keep both issues fixed, I've split
the vshInit() into vshInitDebug() and vshInit().

One simple memleak of ctl->name is fixed as a part of this patch,
since it is related to the issue it's fixing.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=999323
(cherry picked from commit a0b6a36f)

After freeing the bitmap pointer, it must set the pointer to NULL.
This will avoid any other use of the freed memory of the bitmap pointer.

https://bugzilla.redhat.com/show_bug.cgi?id=1006710Signed-off-by: NLiuji (Jeremy) <jeremy.liu@huawei.com>
(cherry picked from commit ef5d51d4)

Introduced by commit 3f029fb5 the RPM build
was broken due to a missing LXC textcase.
Signed-off-by: NDaniel Hansel <daniel.hansel@linux.vnet.ibm.com>
(cherry picked from commit 6285c17f)

Since 76b644c3 when the support for RAM filesystems was introduced,
libvirt accepted the following XML:
<source usage='1024' unit='KiB'/>

This was parsed correctly and internally stored in bytes, but it
was formatted as (with an extra 's'):
<source usage='1024' units='KiB'/>
When read again, this was treated as if the units were missing,
meaning libvirt was unable to parse its own XML correctly.

The usage attribute was documented as being in KiB, but it was not
scaled if the unit was missing. Transient domains still worked,
because this was balanced by an extra 'k' in the mount options.

This patch:
Changes the parser to use 'units' instead of 'unit', as the latter
was never documented (fixing persistent domains) and some programs
(libvirt-glib, libvirt-sandbox) already parse the 'units' attribute.

Removes the extra 'k' from the tmpfs mount options, which is needed
because now we parse our own XML correctly.

Changes the default input unit to KiB to match documentation, fixing:
https://bugzilla.redhat.com/show_bug.cgi?id=1015689
(cherry picked from commit 3f029fb5)

Conflicts:
	src/conf/domain_conf.c
	src/conf/domain_conf.h - missing format
	src/lxc/lxc_container.c - virAsprintf doesn't report OOM errors
	tests/lxcxml2xmltest.c - missing format test

After successful @cmd construction the memory where @keys points to is
part of @cmd. Avoid double freeing it.
(cherry picked from commit 3e8343e1)

https://bugzilla.redhat.com/show_bug.cgi?id=1006864

Commit 38ab1225 changed the default value of ret from true to false but
forgot to set ret = true when job is NONE. Thus, virsh domjobinfo
returned 1 when there was no job running for a domain but it used to
(and should) return 0 in this case.
(cherry picked from commit f084caae)

The virConnectPtr is passed around loads of nwfilter code in
order to provide it as a parameter to the callback registered
by the virt drivers. None of the virt drivers use this param
though, so it serves no purpose.

Avoiding the need to pass a virConnectPtr means that the
nwfilterStateReload method no longer needs to open a bogus
QEMU driver connection. This addresses a race condition that
can lead to a crash on startup.

The nwfilter driver starts before the QEMU driver and registers
some callbacks with DBus to detect firewalld reload. If the
firewalld reload happens while the QEMU driver is still starting
up though, the nwfilterStateReload method will open a connection
to the partially initialized QEMU driver and cause a crash.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
(cherry picked from commit 999d72fb)

Conflicts:
	src/nwfilter/nwfilter_driver.c

The nwfilter driver only needs a reference to its private
state object, not a full virConnectPtr. Update the domUpdateCBStruct
struct to have a 'void *opaque' field instead of a virConnectPtr.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
(cherry picked from commit ebca369e)

None of the virNWFilterDefParse* methods require a virConnectPtr
arg, so just drop it
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
(cherry picked from commit b77b16ce)

Conflicts:
	tests/nwfilterxml2xmltest.c

So far the virNetDevBandwidthEqual() expected both ->in and ->out items
to be allocated for both @a and @b compared. This is not necessary true
for all our code. For instance, running 'update-device' twice over a NIC
with the very same XML results in SIGSEGV-ing in this function.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
(cherry picked from commit ee02fbc8)

The qemuDomainChangeNet() is called when 'virsh update-device' is
invoked on a NIC. Currently, we fail to update the QoS even though
we have routines for that.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
(cherry picked from commit 9fa10d39)

In the original implementation of external checkpoints I've mistakenly
used the live definition to be stored in the save image. The normal
approach is to use the "migratable" definition. This was discovered when
commit 07966f6a changed the behavior to
use a converted XML from the user to do the compatibility check to fix
problem when using the regular machine saving.

As the previous patch added a compatibility layer, we can now change the
type of the XML in the image.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1008340
(cherry picked from commit 1b7bfa65)

External checkpoints have a bug in the implementation where they use the
normal definition instead of the "migratable" one. This causes errors
when the snapshot is being reverted using the workaround method via
qemuDomainRestoreFlags() with a custom XML. This issue was introduced
when commit 07966f6a changed the code to
compare "migratable" XMLs from the user as we should have used
migratable in the image too.

This patch adds a compatibility layer, so that fixing the snapshot code
won't make existing snapshots fail to load.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1008340
(cherry picked from commit 59898a88)

Introduced by commit 1daa4ba3. vshCommandOptStringReq returns
0 on *success* or the option is not required && not present, both
are right result. Error out when returning 0 is not correct.
the caller, it doesn't have to check wether it
(cherry picked from commit 2a3a725c)

Resolves:https://bugzilla.redhat.com/show_bug.cgi?id=923053
When cdrom is block type, the virsh change-media failed to insert
source info because virsh uses "<source block='/dev/sdb'/>" while
the correct name of the attribute for block disks is "dev".

(cherry picked from commit 7729a168)

The 'stats' variable was not initialized to NULL, so if some
early validation of the RPC call fails, it is possible to jump
to the 'cleanup' label and VIR_FREE an uninitialized pointer.
This is a security flaw, since the API can be called from a
readonly connection which can trigger the validation checks.

This was introduced in release v0.9.1 onwards by

  commit 158ba873
  Author: Daniel P. Berrange <berrange@redhat.com>
  Date:   Wed Apr 13 16:21:35 2011 +0100

    Merge all returns paths from dispatcher into single path
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
(cherry picked from commit e7f400a1)

Conflicts:
	daemon/remote.c - context