'free' on Fedora 23 will use MemAvailable to calculate its 'available'
field, but we are passing through the host's value. Set it to match
MemFree, which is what 'free' will do for older linux that don't have
MemAvailable

https://bugzilla.redhat.com/show_bug.cgi?id=1300781

We virtualize bits of /proc/meminfo by replacing host values with
values specific to the container.

However for calculating the final size of the returned data, we are
using the size of the original file and not the altered copy, which
could give garbelled output.

Reverse the conditional at the start so we aren't stuffing all the logic
in an 'if' block

We have macros for both positive and negative string matching.
Therefore there is no need to use !STREQ or !STRNEQ. At the same
time as we are dropping this, new syntax-check rule is
introduced to make sure we won't introduce it again.
Signed-off-by: NIshmanpreet Kaur Khera <khera.ishman@gmail.com>
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

As there are two possible approaches to define a domain's memory size -
one used with legacy, non-NUMA VMs configured in the <memory> element
and per-node based approach on NUMA machines - the user needs to make
sure that both are specified correctly in the NUMA case.

To avoid this burden on the user I'd like to replace the NUMA case with
automatic totaling of the memory size. To achieve this I need to replace
direct access to the virDomainMemtune's 'max_balloon' field with
two separate getters depending on the desired size.

The two sizes are needed as:
1) Startup memory size doesn't include memory modules in some
hypervisors.
2) After startup these count as the usable memory size.

Note that the comments for the functions are future aware and document
state that will be present after a few later patches.

There was a mess in the way how we store unlimited value for memory
limits and how we handled values provided by user.  Internally there
were two possible ways how to store unlimited value: as 0 value or as
VIR_DOMAIN_MEMORY_PARAM_UNLIMITED.  Because we chose to store memory
limits as unsigned long long, we cannot use -1 to represent unlimited.
It's much easier for us to say that everything greater than
VIR_DOMAIN_MEMORY_PARAM_UNLIMITED means unlimited and leave 0 as valid
value despite that it makes no sense to set limit to 0.

Remove unnecessary function virCompareLimitUlong.  The update of test
is to prevent the 0 to be miss-used as unlimited in future.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1146539Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

I'm about to add a syntax check that enforces our documented
HACKING style of always using matching {} on if-else statements.

This patch focuses on drivers that had several issues.

* src/lxc/lxc_fuse.c (lxcProcGetattr, lxcProcReadMeminfo): Correct
use of {}.
* src/lxc/lxc_driver.c (lxcDomainMergeBlkioDevice): Likewise.
* src/phyp/phyp_driver.c (phypConnectNumOfDomainsGeneric)
(phypUUIDTable_Init, openSSHSession, phypStoragePoolListVolumes)
(phypConnectListStoragePools, phypDomainSetVcpusFlags)
(phypStorageVolGetXMLDesc, phypStoragePoolGetXMLDesc)
(phypConnectListDefinedDomains): Likewise.
* src/vbox/vbox_common.c (vboxAttachSound, vboxDumpDisplay)
(vboxDomainRevertToSnapshot, vboxDomainSnapshotDelete): Likewise.
* src/vbox/vbox_tmpl.c (vboxStorageVolGetXMLDesc): Likewise.
Signed-off-by: NEric Blake <eblake@redhat.com>

It sets the errno on all other errors, do it here too.
Also report an error.

Any source file which calls the logging APIs now needs
to have a VIR_LOG_INIT("source.name") declaration at
the start of the file. This provides a static variable
of the virLogSource type.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Without a 'return 0' in the stub lxcStartFuse() method, the
compiler warns:

lxc/lxc_fuse.c:374: error: control reaches end of non-void function
[-Wreturn-type]
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

The glibc setxid is supposed to be async signal safe, but
libc developers confirm that it is not. This causes a problem
when libvirt_lxc starts the FUSE thread and then runs clone()
to start the container. If the clone() was done before the
FUSE thread has completely started up, then the container
will hang in setxid after clone().

The fix is to avoid creating any threads until after the
container has been clone()'d. By avoiding any threads in
the parent, the child is no longer required to run in an
async signal safe context, and we thus avoid the glibc
bug.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

When FUSE is enabled, the LXC container is setup with
a custom /proc/meminfo file. This file uses "KB" as a
suffix, rather than "kB" which is the kernel's style.
Fix this inconsistency to avoid confusing apps.
Signed-off-by: NChen Hanxiao <chenhanxiao@cn.fujitsu.com>

Instead of returning raw errno values, report full libvirt
errors in virCgroupNew* functions.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

The owner of the /proc/meminfo in container should
be the root user of container.
Signed-off-by: NGao feng <gaofeng@cn.fujitsu.com>

By default files in a FUSE mount can only be accessed by the
user which created them, even if the file permissions would
otherwise allow it. To allow other users to access the FUSE
mount the 'allow_other' mount option must be used. This bug
prevented non-root users in an LXC container from reading
the /proc/meminfo file.

https://bugzilla.redhat.com/show_bug.cgi?id=967977Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

The source code base needs to be adapted as well. Some files
include virutil.h just for the string related functions (here,
the include is substituted to match the new file), some include
virutil.h without any need (here, the include is removed), and
some require both.

Instead of using /var/lib/libvirt/lxc/$NAME for the FUSE
filesystem, use /var/lib/libvirt/lxc/$NAME.fuse. This allows
room for other temporary mounts in the same directory

In some startup failure modes, the fuse thread may get itself
wedged. This will cause the entire libvirt_lxc process to
hang trying to the join the thread. There is no compelling
reason to wait for the thread to exit if the whole process
is exiting, so just daemonize the fuse thread instead.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

with this patch,container's meminfo will be shown based on
containers' mem cgroup.

Right now,it's impossible to virtualize all values in meminfo,
I collect some values such as MemTotal,MemFree,Cached,Active,
Inactive,Active(anon),Inactive(anon),Active(file),Inactive(anon),
Active(file),Inactive(file),Unevictable,SwapTotal,SwapFree.

if I miss something, please let me know.
Signed-off-by: NGao feng <gaofeng@cn.fujitsu.com>

this patch addes fuse support for libvirt lxc.
we can use fuse filesystem to generate sysinfo dynamically,
So we can isolate /proc/meminfo,cpuinfo and so on through
fuse filesystem.

we mount fuse filesystem for every container.
the mount name is libvirt,mount point is
localstatedir/run/libvirt/lxc/containername.
Signed-off-by: NGao feng <gaofeng@cn.fujitsu.com>