Skip to content

L
libvirt

openeuler / libvirt

通知 3
Star 0
Fork 0
L
libvirt
切换分支/标签
  1. 01 5月, 2014 1 次提交
  3. 18 4月, 2014 1 次提交
  5. 16 4月, 2014 1 次提交
  7. 11 4月, 2014 3 次提交
  9. 10 4月, 2014 4 次提交
    • J
      Ignore char devices in storage pools by default · 595ada19
      由 Ján Tomko 提交于 
      Without this, using /dev/mapper as a directory pool
fails in virStorageBackendUpdateVolTargetInfoFD:
cannot seek to end of file '/dev/mapper/control': Illegal seek

Skip over character devices by default.

https://bugzilla.redhat.com/show_bug.cgi?id=710866
(cherry picked from commit 0edfc9ef)
      595ada19
    • J
      Ignore missing files on pool refresh · ba7cc215
      由 Ján Tomko 提交于 
      If we cannot stat/open a file on pool refresh, returning -1 aborts
the refresh and the pool is undefined.

Only treat missing files as fatal unless VolOpenCheckMode is called
with the VIR_STORAGE_VOL_OPEN_ERROR flag. If this flag is missing
(when it's called from virStorageBackendProbeTarget in
virStorageBackendFileSystemRefresh), only emit a warning and return
-2 to let the caller skip over the file.

https://bugzilla.redhat.com/show_bug.cgi?id=977706
(cherry picked from commit ee640f44)
      ba7cc215
    • E
      storage: reduce number of stat calls · 1710925a
      由 Eric Blake 提交于 
      We are calling fstat() at least twice per storage volume in
a directory storage pool; this is rather wasteful.  Refactoring
this is also a step towards making code reusable for gluster,
where gluster can provide struct stat but cannot use fstat().

* src/storage/storage_backend.h
(virStorageBackendVolOpenCheckMode)
(virStorageBackendUpdateVolTargetInfoFD): Update signature.
* src/storage/storage_backend.c
(virStorageBackendVolOpenCheckMode): Pass stat results back.
(virStorageBackendUpdateVolTargetInfoFD): Use existing stats.
(virStorageBackendVolOpen, virStorageBackendUpdateVolTargetInfo):
Update callers.
* src/storage/storage_backend_fs.c (virStorageBackendProbeTarget):
Likewise.
* src/storage/storage_backend_scsi.c
(virStorageBackendSCSIUpdateVolTargetInfo): Likewise.
* src/storage/storage_backend_mpath.c
(virStorageBackendMpathUpdateVolTargetInfo): Likewise.
Signed-off-by: NEric Blake <eblake@redhat.com>
(cherry picked from commit 9cac8639)
      1710925a
    • J
      Fix explicit usage of default video PCI slots · be7636c3
      由 Ján Tomko 提交于 
      Do not leave the PCI address of the primary video card set
to the legacy default (0000:00:02.0) if we're doing two-pass
allocation.

Since QEMU 1.6 (QEMU_CAPS_VIDEO_PRIMARY) we allow the primary
video card to be on other slots than 0000:00:02.0 (as we use
-device instead of -vga).

However we fail to assign it an address if:
* another device explicitly uses 0000:00:02.0 and
* the primary video device has no address specified

On the first pass, we have set the address to default, then checked
if it's available, leaving it set even if it wasn't. This address
got picked up by the second pass, resulting in a conflict:

XML error: Attempted double use of PCI slot 0000:00:02.0
(may need "multifunction='on'" for device on function 0)

Also fix the test that was supposed to catch this.

(cherry picked from commit ec128e69)
      be7636c3
  11. 20 3月, 2014 1 次提交
    • M
      virNetClientSetTLSSession: Restore original signal mask · f1725e60
      由 Michal Privoznik 提交于 
      Currently, we use pthread_sigmask(SIG_BLOCK, ...) prior to calling
poll(). This is okay, as we don't want poll() to be interrupted.
However, then - immediately as we fall out from the poll() - we try to
restore the original sigmask - again using SIG_BLOCK. But as the man
page says, SIG_BLOCK adds signals to the signal mask:

SIG_BLOCK
      The set of blocked signals is the union of the current set and the set argument.

Therefore, when restoring the original mask, we need to completely
overwrite the one we set earlier and hence we should be using:

SIG_SETMASK
      The set of blocked signals is set to the argument set.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
(cherry picked from commit 3d4b4f5a)
      f1725e60
  13. 10 3月, 2014 7 次提交
    • E
      storage: use valid XML for awkward volume names · 45d40bcf
      由 Eric Blake 提交于 
      $ touch /var/lib/libvirt/images/'a<b>c'
$ virsh pool-refresh default
$ virsh vol-dumpxml 'a<b>c' default | head -n2
<volume>
  <name>a<b>c</name>

Oops.  That's not valid XML.  And when we fix the XML
generation, it fails RelaxNG validation.

I'm also tired of seeing <key>(null)</key> in the example
output for volume xml; while we used NULLSTR() to avoid
a NULL deref rather than relying on glibc's printf
extension behavior, it's even better if we avoid the issue
in the first place.  But this requires being careful that
we don't invalidate any storage backends that were relying
on key being unassigned during virStoragVolCreateXML[From].

I would have split this into two patches (one for escaping,
one for avoiding <key>(null)</key>), but since they both
end up touching a lot of the same test files, I ended up
merging it into one.

Note that this patch allows pretty much any volume name
that can appear in a directory (excluding . and .. because
those are special), but does nothing to change the current
(unenforced) RelaxNG claim that pool names will consist
only of letters, numbers, _, -, and +.  Tightening the C
code to match RelaxNG patterns and/or relaxing the grammar
to match the C code for pool names is a task for another
day (but remember, we DID recently tighten C code for
domain names to exclude a leading '.').

* src/conf/storage_conf.c (virStoragePoolSourceFormat)
(virStoragePoolDefFormat, virStorageVolTargetDefFormat)
(virStorageVolDefFormat): Escape user-controlled strings.
(virStorageVolDefParseXML): Parse key, for use in unit tests.
* src/storage/storage_driver.c (storageVolCreateXML)
(storageVolCreateXMLFrom): Ensure parsed key doesn't confuse
volume creation.
* docs/schemas/basictypes.rng (volName): Relax definition.
* tests/storagepoolxml2xmltest.c (mymain): Test it.
* tests/storagevolxml2xmltest.c (mymain): Likewise.
* tests/storagepoolxml2xmlin/pool-dir-naming.xml: New file.
* tests/storagepoolxml2xmlout/pool-dir-naming.xml: Likewise.
* tests/storagevolxml2xmlin/vol-file-naming.xml: Likewise.
* tests/storagevolxml2xmlout/vol-file-naming.xml: Likewise.
* tests/storagevolxml2xmlout/vol-*.xml: Fix fallout.
Signed-off-by: NEric Blake <eblake@redhat.com>
(cherry picked from commit 6cc4d6a3)
      45d40bcf
    • E
      maint: fix comma style issues: conf · 5fdc3e6e
      由 Eric Blake 提交于 
      Most of our code base uses space after comma but not before;
fix the remaining uses before adding a syntax check.

* src/conf/capabilities.c: Consistently use commas.
* src/conf/domain_conf.c: Likewise.
* src/conf/network_conf.c: Likewise.
* src/conf/storage_conf.c: Likewise.
Signed-off-by: NEric Blake <eblake@redhat.com>
(cherry picked from commit 6f4901e1)
      5fdc3e6e
    • M
      virNetServerRun: Notify systemd that we're accepting clients · b7288926
      由 Michal Privoznik 提交于 
      Systemd does not forget about the cases, where client service needs to
wait for daemon service to initialize and start accepting new clients.
Setting a dependency in client is not enough as systemd doesn't know
when the daemon has initialized itself and started accepting new
clients. However, it offers a mechanism to solve this. The daemon needs
to call a special systemd function by which the daemon tells "I'm ready
to accept new clients". This is exactly what we need with
libvirtd-guests (client) and libvirtd (daemon). So now, with this
change, libvirt-guests.service is invoked not any sooner than
libvirtd.service calls the systemd notify function.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
(cherry picked from commit 68954fb2)
      b7288926
    • M
      libvirt-guests: Wait for libvirtd to initialize · 73307499
      由 Michal Privoznik 提交于 
      I've noticed that in some cases systemd was quick enough and even
if libvirt-guests.service is marked to be started after the
libvirtd.service my guests were not resumed as
libvirt-guests.sh failed to connect. This is because of a
simple fact: systemd correctly starts libvirt-guests after it
execs libvirtd. However, the daemon is not able to accept
connections right from the start. It's doing some
initialization which may take ages. This problem is not limited
to systemd only, indeed. Any init system that is able to startup
services in parallel (e.g. OpenRC) may run into this situation.
The fix is to try connecting not only once, but continuously a few
times with a small sleep in between tries.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
(cherry picked from commit 4e7fc830)
      73307499
    • M
      virSystemdCreateMachine: Set dependencies for slices · 484cec0b
      由 Michal Privoznik 提交于 
      https://bugzilla.redhat.com/show_bug.cgi?id=1031696

When creating a new domain, we let systemd know about it by calling
CreateMachine() function via dbus. Systemd then creates a scope and
places domain into it. However, later when the host is shutting
down, systemd computes the shutdown order to see what processes can
be shut down in parallel. And since we were not setting
dependencies at all, the slices (and thus domains) were most likely
killed before libvirt-guests.service. So user domains that had to
be saved, shut off, whatever were in fact killed.  This problem can
be solved by letting systemd know that scopes we're creating must
not be killed before libvirt-guests.service.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
(cherry picked from commit ba79e387)
      484cec0b
    • G
      Add Documentation fields to systemd service files · 901aa960
      由 Guido Günther 提交于 
      We point to the manpages where available and redirect to libvirt's
homepage as a last resort.

(cherry picked from commit 1b9f5aa7)
      901aa960
    • D
      Add a mutex to serialize updates to firewall · 034a4d7a
      由 Daniel P. Berrange 提交于 
      The nwfilter conf update mutex previously serialized
updates to the internal data structures for firewall
rules, and updates to the firewall itself. The latter
was recently turned into a read/write lock, and filter
instantiation allowed to proceed in parallel. It was
believed that this was ok, since each filter is created
on a separate iptables/ebtables chain.

It turns out that there is a subtle lock ordering problem
on virNWFilterObjPtr instances. __virNWFilterInstantiateFilter
will hold a lock on the virNWFilterObjPtr it is instantiating.
This in turn invokes virNWFilterInstantiate which then invokes
virNWFilterDetermineMissingVarsRec which then invokes
virNWFilterObjFindByName. This iterates over every single
virNWFilterObjPtr in the list, locking them and checking their
name. So if 2 or more threads try to instantiate a filter in
parallel, they'll all hold 1 lock at the top level in the
__virNWFilterInstantiateFilter method which will cause the
other thread to deadlock in virNWFilterObjFindByName.

The fix is to add an exclusive mutex to serialize the
execution of __virNWFilterInstantiateFilter.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
(cherry picked from commit 925de19e)
      034a4d7a
  15. 19 2月, 2014 18 次提交
  17. 05 2月, 2014 1 次提交
    • E
      event: move event filtering to daemon (regression fix) · fad8d7df
      由 Eric Blake 提交于 
      https://bugzilla.redhat.com/show_bug.cgi?id=1058839

Commit f9f56340 for CVE-2014-0028 almost had the right idea - we
need to check the ACL rules to filter which events to send.  But
it overlooked one thing: the event dispatch queue is running in
the main loop thread, and therefore does not normally have a
current virIdentityPtr.  But filter checks can be based on current
identity, so when libvirtd.conf contains access_drivers=["polkit"],
we ended up rejecting access for EVERY event due to failure to
look up the current identity, even if it should have been allowed.

Furthermore, even for events that are triggered by API calls, it
is important to remember that the point of events is that they can
be copied across multiple connections, which may have separate
identities and permissions.  So even if events were dispatched
from a context where we have an identity, we must change to the
correct identity of the connection that will be receiving the
event, rather than basing a decision on the context that triggered
the event, when deciding whether to filter an event to a
particular connection.

If there were an easy way to get from virConnectPtr to the
appropriate virIdentityPtr, then object_event.c could adjust the
identity prior to checking whether to dispatch an event.  But
setting up that back-reference is a bit invasive.  Instead, it
is easier to delay the filtering check until lower down the
stack, at the point where we have direct access to the RPC
client object that owns an identity.  As such, this patch ends
up reverting a large portion of the framework of commit f9f56340.
We also have to teach 'make check' to special-case the fact that
the event registration filtering is done at the point of dispatch,
rather than the point of registration.  Note that even though we
don't actually use virConnectDomainEventRegisterCheckACL (because
the RegisterAny variant is sufficient), we still generate the
function for the purposes of documenting that the filtering
takes place.

Also note that I did not entirely delete the notion of a filter
from object_event.c; I still plan on using that for my upcoming
patch series for qemu monitor events in libvirt-qemu.so.  In
other words, while this patch changes ACL filtering to live in
remote.c and therefore we have no current client of the filtering
in object_event.c, the notion of filtering in object_event.c is
still useful down the road.

* src/check-aclrules.pl: Exempt event registration from having to
pass checkACL filter down call stack.
* daemon/remote.c (remoteRelayDomainEventCheckACL)
(remoteRelayNetworkEventCheckACL): New functions.
(remoteRelay*Event*): Use new functions.
* src/conf/domain_event.h (virDomainEventStateRegister)
(virDomainEventStateRegisterID): Drop unused parameter.
* src/conf/network_event.h (virNetworkEventStateRegisterID):
Likewise.
* src/conf/domain_event.c (virDomainEventFilter): Delete unused
function.
* src/conf/network_event.c (virNetworkEventFilter): Likewise.
* src/libxl/libxl_driver.c: Adjust caller.
* src/lxc/lxc_driver.c: Likewise.
* src/network/bridge_driver.c: Likewise.
* src/qemu/qemu_driver.c: Likewise.
* src/remote/remote_driver.c: Likewise.
* src/test/test_driver.c: Likewise.
* src/uml/uml_driver.c: Likewise.
* src/vbox/vbox_tmpl.c: Likewise.
* src/xen/xen_driver.c: Likewise.
Signed-off-by: NEric Blake <eblake@redhat.com>
(cherry picked from commit 11f20e43)

Conflicts:
	daemon/remote.c - not backporting network events
	src/conf/network_event.c - likewise
	src/conf/network_event.h - likewise
	src/network/bridge_driver.c - likewise
	src/conf/domain_event.c - revert back to pre-CVE state
	src/conf/domain_event.h - likewise
	src/libxl/libxl_driver.c - likewise
	src/lxc/lxc_driver.c - likewise
	src/remote/remote_driver.c - likewise
	src/test/test_driver.c - likewise
	src/uml/uml_driver.c - likewise
	src/xen/xen_driver.c - likewise
      fad8d7df
  19. 04 2月, 2014 2 次提交
    • D
      Push nwfilter update locking up to top level · 978648de
      由 Daniel P. Berrange 提交于 
      The NWFilter code has as a deadlock race condition between
the virNWFilter{Define,Undefine} APIs and starting of guest
VMs due to mis-matched lock ordering.

In the virNWFilter{Define,Undefine} codepaths the lock ordering
is

  1. nwfilter driver lock
  2. virt driver lock
  3. nwfilter update lock
  4. domain object lock

In the VM guest startup paths the lock ordering is

  1. virt driver lock
  2. domain object lock
  3. nwfilter update lock

As can be seen the domain object and nwfilter update locks are
not acquired in a consistent order.

The fix used is to push the nwfilter update lock upto the top
level resulting in a lock ordering for virNWFilter{Define,Undefine}
of

  1. nwfilter driver lock
  2. nwfilter update lock
  3. virt driver lock
  4. domain object lock

and VM start using

  1. nwfilter update lock
  2. virt driver lock
  3. domain object lock

This has the effect of serializing VM startup once again, even if
no nwfilters are applied to the guest. There is also the possibility
of deadlock due to a call graph loop via virNWFilterInstantiate
and virNWFilterInstantiateFilterLate.

These two problems mean the lock must be turned into a read/write
lock instead of a plain mutex at the same time. The lock is used to
serialize changes to the "driver->nwfilters" hash, so the write lock
only needs to be held by the define/undefine methods. All other
methods can rely on a read lock which allows good concurrency.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
(cherry picked from commit 6e5c79a1)
      978648de
    • D
      Add a read/write lock implementation · 7ca05e2f
      由 Daniel P. Berrange 提交于 
      Add virRWLock backed up by a POSIX rwlock primitive
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
(cherry picked from commit c065984b)
      7ca05e2f
  21. 29 1月, 2014 1 次提交