This also reduces malloc pressure for invoking a child when
VIR_DEBUG is enabled.

* src/util/command.c (virExecWithHook): Drop debug, since the only
caller (virCommandRunAsync) also prints debug info.

* include/libvirt/libvirt.h.in (virDomainModificationImpact): Reword.

If qemu supports -chardev, our char frontend aliases are ex. 'charserial0'
not just 'serial0'. Typically we don't use this code path because the
pty's are scraped from stdout.

Currently we forget to do this and have to fallback to info chardev (which
also fails, see following patch)

'virsh version' might report against which version of libvirtd is
running.

that break compilation on non intel architectures:

mips:
https://buildd.debian.org/status/fetch.php?pkg=libvirt&arch=mips&ver=0.9.2-1&stamp=1307570195
powerpc:
https://buildd.debian.org/status/fetch.php?pkg=libvirt&arch=powerpc&ver=0.9.2-1&stamp=1307550913
s390:
https://buildd.debian.org/status/fetch.php?pkg=libvirt&arch=s390&ver=0.9.2-1&stamp=1307641748
sparc:
https://buildd.debian.org/status/fetch.php?pkg=libvirt&arch=sparc&ver=0.9.2-1&stamp=1307552926

Push under trivial rule.

Qemu once supported following memory stats which will returned by
"query_balloon":

    stat_put(dict, "actual", actual);
    stat_put(dict, "mem_swapped_in", dev->stats[VIRTIO_BALLOON_S_SWAP_IN]);
    stat_put(dict, "mem_swapped_out", dev->stats[VIRTIO_BALLOON_S_SWAP_OUT]);
    stat_put(dict, "major_page_faults", dev->stats[VIRTIO_BALLOON_S_MAJFLT]);
    stat_put(dict, "minor_page_faults", dev->stats[VIRTIO_BALLOON_S_MINFLT]);
    stat_put(dict, "free_mem", dev->stats[VIRTIO_BALLOON_S_MEMFREE]);
    stat_put(dict, "total_mem", dev->stats[VIRTIO_BALLOON_S_MEMTOT]);

But it later disabled all the stats except "actual" by commit
07b0403dfc2b2ac179ae5b48105096cc2d03375a.

libvirt doesn't parse "actual", so user will always see a empty result
with "virsh dommemstat $domain". Even qemu haven't disabled the stats,
we should support parsing "actual".

There is the case where cpu affinites for vcpu of qemu doesn't work
correctly. For example, if only one vcpupin setting entry is provided
and its setting is not for vcpu0, it doesn't work.

   # virsh dumpxml VM
   ...
   <vcpu>4</vcpu>
   <cputune>
     <vcpupin vcpu='3' cpuset='9-11'/>
   </cputune>
   ...

   # virsh start VM
   Domain VM started

   # virsh vcpuinfo VM
   VCPU:           0
   CPU:            31
   State:          running
   CPU time:       2.5s
   CPU Affinity:   yyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyy

   VCPU:           1
   CPU:            12
   State:          running
   CPU time:       0.9s
   CPU Affinity:   yyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyy

   VCPU:           2
   CPU:            30
   State:          running
   CPU time:       1.5s
   CPU Affinity:   yyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyy

   VCPU:           3
   CPU:            13
   State:          running
   CPU time:       1.7s
   CPU Affinity:   yyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyy

This patch fixes this problem.
Signed-off-by: NTaku Izumi <izumi.taku@jp.fujitsu.com>

Since the addition of the lock manager framework in 6a943419
dlopen is always required, but the checks in configure wasn't changed
to reflect that. This didn't show up directly because the VirtualBox
driver linking dlopen in covered it. But disabling the VirtualBox
driver makes the build fail due to missing dlopen.

Change the dlopen check in configure to pick up dlopen when available.

Reported by Ruben Kerkhof.

This patch deprecates following enums:

VIR_DOMAIN_MEM_CURRENT
VIR_DOMAIN_MEM_LIVE
VIR_DOMAIN_MEM_CONFIG

VIR_DOMAIN_VCPU_LIVE
VIR_DOMAIN_VCPU_CONFIG

VIR_DOMAIN_DEVICE_MODIFY_CURRENT
VIR_DOMAIN_DEVICE_MODIFY_LIVE
VIR_DOMAIN_DEVICE_MODIFY_CONFIG

And modify internal codes to use virDomainModificationImpact.

The below patch decreases the response time of libvirt to errors reported by Qemu upon startup by checking whether the qemu process is still alive while polling for the local socket to show up.

This patch also introduces a special handling of signal for the Win32 part of virKillProcess.

* .gnulib: Update to latest, for more strerror_r fixes.

This patch adds the new option (--live, --config and --current) to
"virsh vcpupin" command. The behavior of above aption is the same as
that of "virsh setmem", "virsh setvcpus", and whatnot.
When the --config option is specified, the command affects a persistent
domain, while --live option is specified, it affects a running (live) domain.
The --current option cannot be used with --config or --live at the same
time, and when --current is specified, it affects a "current" domain.

This patch implements the remote protocol for the new API
(virDomainPinVcpuFlags).

This patch implements the new API (virDomainPinVcpuFlags) in the qemu
driver.

This patch introduces a new libvirt API virDomainPinVcpuFlags,
a direct extension from the existing virDomainPinVcpu

If qemu supports multi function PCI device, the format of the PCI address passed
to qemu is "bus=pci.0,multifunction=on,addr=slot.function".

If qemu does not support multi function PCI device, the format of the PCI address
passed to qemu is "bus=pci.0,addr=slot".

Hot pluging/unpluging multi PCI device is not supported now. So the function
of hotplugged PCI device must be 0. When we hot unplug it, we should set release
all functions in the slot.

If user does not specify the PCI address, we should auto assign an unused slot.

We will support multi function PCI device. So we should reserve all functions in
the slot if we want to reserve a slot.

We save all used PCI address in the hash table. The key is generated by domain,
bus and slot now. We will support multi function PCI device, so the key should
be generated by domain, bus, slot and function.

We do not support to hot unplug multi function PCI device now. If the device is
one function of multi function PCI device, we shoul not allow to hot unplugg
it.

qemu supports multi function PCI device at least version 0.13.0.

XenAPI session login can fail for a number of reasons, but currently no
specific
reason is displayed to the user, e.g.:

virsh -c XenAPI://citrix-xen.example.com/
Enter username for citrix-xen.example.com: root
Enter root's password for citrix-xen.example.com:
error: authentication failed: (null)
error: failed to connect to the hypervisor

This patch displays the session error description on failure.

s/hostdevwork/hostdev/

The VMware driver works like the OpenVZ driver by using a commandline
tool for management. It dosen't use it's own remote protocol.

Regression introduced in commit 02e86910.

* src/security/virt-aa-helper.c (includes): Reflect move of virRun.

Detected by Coverity.  Commit ef21beda was incomplete; it solved
a leak one one path, but not on the other.

* daemon/libvirtd.c (qemudSetLogging): Avoid leak on success.

As long as I was already touching the function...

* src/qemu/qemu_hotplug.c (qemuDomainChangeGraphics): Line wrap.

Detected by Coverity.  Bug introduced in commit 9d73efdb (v0.8.8).

* src/qemu/qemu_hotplug.c (qemuDomainChangeGraphics): Don't report
error on success.

Coverity complained about these intentional fallthrough cases, but
not about other cases that were explicitly marked with nice comments.

For some reason, Coverity doesn't seem smart enough to parse the
up-front English comment in virsh about intentional fallthrough :)

* tools/virsh.c (cmdVolSize): Mark fallthrough in a more typical
fashion.
* src/conf/nwfilter_conf.c (virNWFilterRuleDefDetailsFormat)
(virNWFilterRuleDetailsParse): Mark explicit fallthrough.

Detected by Coverity.  The beginning of the function already filtered
out NULL objectContentList as invalid.  Further investigation shows:

esxVI_RetrieveProperties is generated and returns a list of objects
that match the given propertyFilterSpec.
esxVI_LookupObjectContentByType then tests whether the result
corresponds to the expected occurrence and reports an error otherwise.
This simplifies the callers of  esxVI_LookupObjectContentByType, but
due to the missing dereference the check was never performed because
the code thought that at least one item was obtained. NULL represents
an empty list. This is a potential segfault fix because callers of
esxVI_LookupObjectContentByType that specified "required" occurrence
assume *objectContentList to be non-NULL when
esxVI_LookupObjectContentByType succeeds.

* src/esx/esx_vi.c (esxVI_LookupObjectContentByType): Check
correct pointer.

Detected by Coverity.  The only ways to get to the cleanup label
were by an early abort (list still unassigned) or after successfully
transferring list to dest, so there is no list to clean up.

* src/secret/secret_driver.c (loadSecrets): Kill dead code.

Detected by Coverity.  All existing callers happen to be in
range, so this isn't too serious.

* src/qemu/qemu_cgroup.c (qemuCgroupControllerActive): Check
bounds before dereference.

Coverity already saw through a NULL dereference without these
annotations, and gcc is still too puny to do good NULL analysis.
But clang still benefits (and is easier to run than coverity),
not to mention that adding this bit of documentation to the code
may help future developers remember the constraints.

* src/util/uuid.h (virGetHostUUID, virUUIDFormat): Document
restrictions, for improved static analysis.