When registering admin UNIX socket, a new service is created for it. This
service is incorrectly initialized to be readonly, which is later inherited by
all clients connected to the socket. In libvirt-admin's case there currently
isn't any use for the attribute anyway, but since the socket has root-only
access permissions, the least we can do is to make every admin client
connected to it report readonly as false.
Signed-off-by: NErik Skultety <eskultet@redhat.com>

Commits 52a2eef9 and 62be5486 forgot to add these errors to daemon's error
whitelist, i.e. in order to avoid log file pollution with errors like "Domain
not found" or "Server not found" in this case, since these events are valid
and expected to occur.
Signed-off-by: NErik Skultety <eskultet@redhat.com>

Daemon config parameter switch between reading host uuid
either from smbios or machine-id:

host_uuid_source = "smbios|machine-id"
Signed-off-by: NNikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>

Admin API needs a way of addressing specific clients. Unlike servers, which we
are happy to address by names both because its name reflects its purpose (to
some extent) and we only have two of them (so far), naming clients doesn't make
any sense, since a) each client is an anonymous, i.e. not recognized after a
disconnect followed by a reconnect, b) we can't predict what kind of requests
it's going to send to daemon, and c) the are loads of them comming and going,
so the only viable option is to use an ID which is of a reasonably wide data
type.
Signed-off-by: NErik Skultety <eskultet@redhat.com>

Take setlocale/gettext error handling pattern from tools/virsh-*
and use it for all standalone binaries via a new shared
virGettextInitialize routine. The virsh* pattern differed slightly
from other callers. All users now consistently:

* Ignore setlocale errors. virsh has done this forever, presumably for
  good reason. This has been partially responsible for some bug reports:

  https://bugzilla.redhat.com/show_bug.cgi?id=1312688
  https://bugzilla.redhat.com/show_bug.cgi?id=1026514
  https://bugzilla.redhat.com/show_bug.cgi?id=1016158

* Report the failed function name
* Report strerror

Make it possible to build vz driver as a module and don't link it with
libvirt.so statically.
Remove registering it on client's side as far as we start relying on daemon
Signed-off-by: NMaxim Nestratov <mnestratov@virtuozzo.com>

Since servers know their name, there is no need to supply such
information twice.  Also defeats inconsistencies.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

At first I did not want to do this, but after trying to implement some
newer feaures in the admin API I realized we need that to make our lives
easier.  On the other hand they are not saved redundantly and the
virNetServer objects are still kept in a hash table.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

This change is merely because admin_server would contain all the code
from dispatchers and helpers to the actual APIs. Admin should have
similar structure to the daemon-side remote driver - dispatchers and
helpers in a separate module, APIs in a separate module.

Best viewed with -M.
Signed-off-by: NErik Skultety <eskultet@redhat.com>
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

Since the daemon can manage and add (at fresh start) multiple servers,
we also should be able to add them from a JSON state file in case of a
daemon restart, so post exec restart support for multiple servers is also
provided. Patch also updates virnetdaemontest accordingly.
Signed-off-by: NErik Skultety <eskultet@redhat.com>
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

Since its introduction in 2011 (particularly in commit f4324e32),
the option doesn't work.  It just effectively disables all incoming
connections.  That's because the client private data that contain the
'keepalive_supported' boolean, are initialized to zeroes so the bool is
false and the only other place where the bool is used is when checking
whether the client supports keepalive.  Thus, according to the server,
no client supports keepalive.

Removing this instead of fixing it is better because a) apparently
nobody ever tried it since 2011 (4 years without one month) and b) we
cannot know whether the client supports keepalive until we get a ping or
pong keepalive packet.  And that won't happen until after we dispatched
the ConnectOpen call.

Another two reasons would be c) the keepalive_required was tracked on
the server level, but keepalive_supported was in private data of the
client as well as the check that was made in the remote layer, thus
making all other instances of virNetServer miss this feature unless they
all implemented it for themselves and d) we can always add it back in
case there is a request and a use-case for it.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

s/priviledged/privileged/
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Don't listen on the admin socket in the daemon and comment out the
admin devel files out of specfile.

Library is still being compiled and installed in order to link easily
without any disturbing modifications to the daemon code.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

When setting up the daemon networking, new services are created. These
services then have sockets to listen on. Once created, the service
objects are added to corresponding server object. However, during that
process, server increases reference counter of the service object. So,
at the end of the function, we should decrease it again. This way the
service objects will have only 1 reference, but that's okay since
servers are the only objects having a reference.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

If the admin service is disabled it would not be allocated, but the NULL
pointer still would be added to the admin server. Since
virNetServerAddService would dereference it, the daemon would crash.

Move the service registration into the block that allocates it.

For this to pe properly separated from other protocols used by the
server, there is second server added which allows access to the whole
virNetDaemon to its clients.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

This allows to have more servers in one daemon which helps isolating
some resources.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

By default, getaddrinfo() will return addresses for both
IPv4 and IPv6 if both protocols are enabled, and so the
RPC code will listen/connect to both protocols too. There
may be cases where it is desirable to restrict this to
just one of the two protocols, so add an 'int family'
parameter to all the TCP related APIs.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Similarly to other error codes that notify the user that the object does
not exist lower the priority of VIR_ERR_NO_DOMAIN_METADATA to
VIR_LOG_DEBUG when writing the log entry.

No longer needed after commit dd477238

In the order of appearance:

* MAX_LISTEN - never used
  added by 23ad665c (qemud) and addec57 (lock daemon)

* NEXT_FREE_CLASS_ID - never used, added by 07d1b6b5

* virLockError - never used, added by eb8268a4

* OPENVZ_MAX_ARG, CMDBUF_LEN, CMDOP_LEN
  unused since the removal of ADD_ARG_LIT in d8b31306

* QEMU_NB_PER_CPU_STAT_PARAM - unused since 897808e7

* QEMU_CMD_PROMPT, QEMU_PASSWD_PROMPT - unused since 1dc10a7b

* TEST_MODEL_WORDSIZE - unused since c25c18f7

* TEMPDIR - never used, added by 714bef5b

* NSIG - workaround around old headers
  added by commit 60ed1d2a
  unused since virExec was moved by commit 02e86910

* DO_TEST_PARSE - never used, added by 9afa0060

* DIFF_MSEC, GETTIMEOFDAY - unused since eee6eb66

Libvirt could crash with segfault if user issue "service reload" right
after "service start". One possible way to crash libvirt is to run reload
during initialization of QEMU driver.

It could happen when qemu driver will initialize qemu_driver_lock but
don't have a time to set it's "config" and the SIGHUP arrives. The
reload handler tries to get qemu_drv->config during "virStorageAutostart"
and dereference it which ends with segfault.

Let's ignore all reload requests until all drivers are initialized. In
addition set driversInitialized before we enter virStateCleanup to
ignore reload request while we are shutting down.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1179981Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

libvirtd.c: In function 'daemonSetupAccessManager':
libvirtd.c:730:18: error: declaration of 'driver' shadows
  a global declaration [-Werror=shadow]
     const char **driver = (const char **)config->access_drivers;
                  ^
In file included from libvirtd.c:95:0:
../src/node_device/node_device_driver.h:43:36: error: shadowed
  declaration is here [-Werror=shadow]
 extern virNodeDeviceDriverStatePtr driver;
                                    ^

For stateless, client side drivers, it is never correct to
probe for secondary drivers. It is only ever appropriate to
use the secondary driver that is associated with the
hypervisor in question. As a result the ESX & HyperV drivers
have both been forced to do hacks where they register no-op
drivers for the ones they don't implement.

For stateful, server side drivers, we always just want to
use the same built-in shared driver. The exception is
virtualbox which is really a stateless driver and so wants
to use its own server side secondary drivers. To deal with
this virtualbox has to be built as 3 separate loadable
modules to allow registration to work in the right order.

This can all be simplified by introducing a new struct
recording the precise set of secondary drivers each
hypervisor driver wants

struct _virConnectDriver {
    virHypervisorDriverPtr hypervisorDriver;
    virInterfaceDriverPtr interfaceDriver;
    virNetworkDriverPtr networkDriver;
    virNodeDeviceDriverPtr nodeDeviceDriver;
    virNWFilterDriverPtr nwfilterDriver;
    virSecretDriverPtr secretDriver;
    virStorageDriverPtr storageDriver;
};

Instead of registering the hypervisor driver, we now
just register a virConnectDriver instead. This allows
us to remove all probing of secondary drivers. Once we
have chosen the primary driver, we immediately know the
correct secondary drivers to use.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

We weren't ever using the value for anything other than being non-zero.

* src/util/viraudit.h (virAuditLog): Change signature.
* src/util/viraudit.c (virAuditLog): Update user.
* daemon/libvirtd.c (main): Likewise.
Signed-off-by: NEric Blake <eblake@redhat.com>

Coverity complains that the comparison:

  if (nfds && nfds > ((int)!!sock_path + (int)!!sock_path_ro))

could mean 'sock_path' is NULL. Later in virNetSocketNewListenUNIX
there's a direct dereference of path in the error path:

  if (path[0] != '@')

A bit of sleuthing proves that upon entry to daemonSetupNetworking
there is no way for 'sock_path' to be NULL since daemonUnixSocketPaths
will set up 'sock_file' (although it may not set up 'sock_file_ro')
in all 3 paths.

Adjusted code to add ATTRIBUTE_NONNULL(3) on incoming path parameter and
then fixup the comparison of nfds to be a comparison against 2 or 1
depending on whether sock_path_ro is NULL or not.

Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

With eblake's help - adjust the checks for stdinfd/stdoutfd to ensure the
values are within the range we expect; otherwise the dup2()'s and subsequent
VIR_CLOSE() calls cause Coverity to believe there's a resource leak.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

Since times when vbox moved to the daemon (due to some licensing
issue) the subdrivers that vbox implements were registered, but not
opened since our generic subdrivers took priority. I've tried to fix
this in 65b7d553 but it was not correct. Apparently moving
vbox driver registration upfront changes the default connection URI
which makes some users sad. So, this commit breaks vbox into pieces
and register vbox's network and storage drivers first, and vbox driver
then at the end. This way, the vbox driver is registered in the order
it always was, but its subdrivers are registered prior the generic
ones.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

Introduce by 63fbcc69.

When start libvirtd with commandline "/usr/sbin/libvirtd -d -l -v",
we expect verbose(info level) log if neither environment variable
nor config file about logging controls is set. But in fact we can't
get any info priority log in the default output file.

The log priority of default output is VIR_LOG_DEFAULT(VIR_LOG_WARN),
so the info log is filtered out.
To record info priority log we must parse option -v before setting the
default output.

After this patch, we get all verbose log in the default output file.
Signed-off-by: NZhou Yimin <zhouyimin@huawei.com>

First FD is the RW unix socket to listen on, second one (if
applicable) is the RO unix socket.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

There are some stateless drivers which implement subdrivers
(typically vbox and its own network and storage subdrivers). However,
as of ba5f3c7c the vbox driver lives in the daemon, not the
client library. This means, in order for vbox (or any stateless domain
driver) to use its subdrivers, it must register before the general
drivers. Later, when the virConnectOpen function goes through the
subdrivers, stateless drivers are searched first. If the connection
request is aiming at stateless driver, it will be opened. Otherwise
the generic subdriver is opened.

The other change done in this commit is moving interface module load a
bit earlier to match the ordering in case libvirt is built without
driver modules.
Reported-by: NTaowei Luo <uaedante@gmail.com>
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Libvirt is really chatty when the DEBUG log level is enabled. When a
host uses journald we'd enable debug logging to journald when only
specifying the debug log level. As journald may employ rate throttling
this would lock up the daemon until it's able to flush all debug
messages.

This patch changes the default log level to VIR_LOG_INFO when using the
default (unconfigured) log output to journald.

To still allow debug logging to journald the user now has to explicitly
specify journald as a log output with priority 1 in the "log_outputs"
configuration option. This patch also changes the config file template
to be explicit about this change and notify the user about the possible
consequence of debug logging into journald.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1121955

Signed-off-by: NWang Rui <moon.wangrui@huawei.com>

Replace use of cpuMapOverride with virFileFindResource
to locate CPU map from build dir.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Replace virDriverModuleInitialize with virFileFindResource
usage.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Replace virLockManagerSetPluginDir with virFileFindResource
usage.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Add calls to virFileActivateDirOverride so that the build dir
overrides are activated.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Fixes leak introduced by e562e82f

==4937== 64 bytes in 1 blocks are definitely lost in loss record 270 of 405
==4937==    at 0x4A06BE0: realloc (vg_replace_malloc.c:662)
==4937==    by 0x6FA41C4: __vasprintf_chk (vasprintf_chk.c:90)
==4937==    by 0x50C8D29: virVasprintfInternal (stdio2.h:199)
==4937==    by 0x50C8E3A: virAsprintfInternal (virstring.c:362)
==4937==    by 0x11D01A: main (libvirtd.c:1170)
Signed-off-by: NJán Tomko <jtomko@redhat.com>