1. 'last_good_net' indicates the index of last successfully configured
net. so def->nets[last_good_net] should also be clean up if error occurs.

2. if error occurs in 'virNetDevMacVLanVPortProfileRegisterCallback'
(second 'goto err_exit' in loop), we should also do
'virNetDevVPortProfileDisassociate' cleanup for the
'virNetDevVPortProfileAssociate'(first code block in loop). So we should
consider the net is successfully configured after first code block in
loop finishes.
Signed-off-by: NHuanle Han <hanxueluo@gmail.com>

The original bug report was at
https://bugs.launchpad.net/ubuntu/+source/libvirt/+bug/1393842

Also skip abstract unix sockets.
Signed-off-by: NSerge Hallyn <serge.hallyn@ubuntu.com>
Signed-off-by: NJán Tomko <jtomko@redhat.com>

After set memory parameters for running domain, save the change to live
xml is needed otherwise it will disappear after restart libvirtd.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1211548Signed-off-by: NShanzhi Yu <shyu@redhat.com>
Signed-off-by: NJán Tomko <jtomko@redhat.com>

When set guest memory with a invalid parameter of --soft-limit,
it posts weird error:

$ virsh memtune r7 --hard-limit 20417224 --soft-limit 9007199254740992 \
  --swap-hard-limit 35417224
error: Unable to parse integer parameter 'NAME

Change it to

error: Unable to parse integer parameter soft-limit

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1211550Signed-off-by: NShanzhi Yu <shyu@redhat.com>
Signed-off-by: NJán Tomko <jtomko@redhat.com>

Apparently for Xen-devel 'index' is a global and causes a build failure,
so just use the shortened 'idx' instead to avoid the conflict.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

Change few variable names and refactor the code flow. As an additional
bonus the function now fails if the event state is not as expected.

QEMU does not abandon the mirror. The job carries on in the synchronised
phase and it might be either pivoted again or cancelled. The commit
hints that the described behavior was happening in a downstream version.

If the command returns false there are two possible options:
1) qemu did not reach the point where it would ask the block job to
pivot
2) pivotting failed in the actual qemu coroutine

If either of those would happen we return failure and reset the
condition that waits for the block job to complete. This makes the API
fail but in case where qemu would actually abandon the mirror the fact
is notified via the event and handled asynchronously.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1202704

Since it now handles only block pull code paths we can refactor it and
remove tons of cruft.

Sacrifice a few lines of code in favor of the code being more readable.

qemuDomainBlockJobImpl become an unmaintainable mess over the years of
adding new stuff to it. This patch starts splitting up individual
functions from it until it can be killed entirely.

In bulk this will add lines of code rather than delete them but it will
be traded for maintainability.

My intention is to split qemuMonitorJSONBlockJob() into simpler separate
functions for every block job type. Since the error handling code is the
same for all block jobs, this patch extracts the code into a separate
function that will later be reused in more places.

With the new helper qemuMonitorJSONErrorIsClass we can save a few
function calls as we can extract the error object once.

Split out the function that checks the actual error class string into a
separate helper as it will be useful later and refactor
qemuMonitorJSONHasError to return bool type and remove few useless
checks.

Basically virJSONValueObjectHasKey are useless here since the next call
to virJSONValueObjectGet is checking the return value again (which can't
fail at that point). By removing the first check we save a function
call.

Previously we checked that the vcpu we are trying to set is in range of
the number of threads presented by qemu. The problem is that if the VM
is offline the count is 0. Since the condition subtracted 1 from the
count the number would overflow and the check would never trigger.

Change the condition for more sensible ones with specific error
messages.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1208434

Refactor the code to parse the vcpupin in a similar way the iothreadpin
code is now structured. This allows to get rid of some very strange
conditions and error messages.

Additionally since a existing bug
( https://bugzilla.redhat.com/show_bug.cgi?id=1208434 ) allows to add
vcpupin definitions for vcpus that don't exist, this patch makes the
parser to ignore all vcpupins that don't have a matching vCPU in the
definition rather than just offlined ones.

Defining a domain with the following config:

<domain ...>
  ...
  <iothreads>1</iothreads>
  <cputune>
    <iothreadpin cpuset='1'/>

will result in the following config formatted back:
<domain type='kvm'>
  ...
  <iothreads>1</iothreads>
  <cputune>
    <iothreadpin iothread='0' cpuset='1'/>

After restart the VM would vanish. Since our schema requires the
@iothread field to be present in <iothreadpin> make it required by the
code too.

Extract part that parses iothreads into virDomainIothreadPinDefParseXML

Split up parts of virDomainVcpuPinDefParseXML into
virDomainEmulatorPinDefParseXML.

When creating a snapshot with _REUSE_EXTERNAL when the pre-created image
does not directly link to the current active layer libvirt would
re-detect the backing chain incorrectly and it would not match with
qemu's view. Since the configuration is an operator mistake, document
that only the top layer image gets inserted.

Operating systems use the identifier to name the disks. As the name
suggests the ID should be unique.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1208009

Since the WWN influences guest behavior in naming disks we should treat
this as vm ABI.

Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

Use virBitmap helpers that were added after this function.

Change cpumaplen to int and fill it out by this function.

Use virBitmapDataToString instead of constructing the ranges bit
by bit, remove the checking of parameters (that is already done
by the callers).

Let the callers choose the right bitmap, since there's only
one that uses this helper on a matrix-in-an-array.

That function uses domainAttachDeviceFlags
Signed-off-by: NAlexander Burluka <aburluka@parallels.com>

Parallels Cloud Server supports block devices and virtual NIC
live attachment. I implemented that function for block devices so
OpenStack volume attachment is now works.
Signed-off-by: NAlexander Burluka <aburluka@parallels.com>

OpenStack needs disk serial number setup because
nova boot --block-device-mapping command generates that param in
libvirt xml. I took QEMU libvirt driver behavior as a base.
QEMU driver skips inability to set serial and continues work.
So Parallels driver will ignore this param too and let domain
boot.

Do not loop over enum with one value.

This will contain the data required for creating the qemu-img
command line without having access to the volume definition.

Add FromVol at the end. This function will create the qemu-img
command line from volume definitions and check them.

Instead of going through XML nodes in a loop and
having to check if they are duplicate.

For future reuse in the snapshot XML.

This patch adds checks for empty bitmaps right after the calls of
virBitmapParse. These only include spots where set API's are called and
where domain's XML is parsed.
Also, it partially reverts commit 983f5a which added a check for
invalid nodeset "0,^0" into virBitmapParse function. This change broke
the logic, as an empty bitmap should not cause an error.

https://bugzilla.redhat.com/show_bug.cgi?id=1210545

We only have one formatting function for the features.

Create four smaller blocks of texts instead of one large one.

Simplify the function by leaving out the local copy and checking
return values of virStrToLong.

Request that the number be parsed as decimal, to allow 08
and 09.

Format it with the leading zero, 1.01 and 1.10 are two
different versions.

https://bugzilla.redhat.com/show_bug.cgi?id=1210650

We don't format the default '-1' fields back.

On arm, we probe for virtio-*-pci devices, but use their
virtio-*-device variants.

Set the capabilities based on the -device variants as well,
to make them work with qemus with the PCI devices compiled out.

When pre-creating storage for domains, we need to find corresponding
disk in the XML on the destination (domain XML may differ there, e.g.
disk is accessible under different path). For better debugging, I'm
printing all info I received on a disk. But there was a typo when
printing the disk capacity: "%lluu" instead of "%llu".
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>