Reverting to a snapshot may change domain configuration. New
configuration should be saved if domain has persistent flag.

VIR_DOMAIN_EVENT_DEFINED_FROM_SNAPSHOT is emitted in case of
configuration update.

VIR_DOMAIN_EVENT_DEFINED_FROM_SNAPSHOT event should be emitted
when domain configuration was changed on revert to snapshot.

Add new function to manage adding the panic device options to the
command line removing that task from the mainline qemuBuildCommandLine.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

Add new function to manage adding the NVRAM device options to the
command line removing that task from the mainline qemuBuildCommandLine.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

Add new function to manage adding the RNG device options to the
command line removing that task from the mainline qemuBuildCommandLine.

Also modify the qemuBuildRNGDevStr to use const virDomainDef instead
of virDomainDefPtr.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

Add new function to manage adding the memballoon device options to the
command line removing that task from the mainline qemuBuildCommandLine.

Also modify the qemuBuildMemballoonDevStr to use const virDomainDef
instead of virDomainDefPtr.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

Add new function to manage adding the host device options to the
command line removing that task from the mainline qemuBuildCommandLine.

Also modify qemuBuildPCIHostdevDevStr, qemuBuildUSBHostdevDevStr,
and qemuBuildSCSIHostdevDevStr to use const virDomainDef instead
of virDomainDefPtr.

Make qemuBuildPCIHostdevPCIDevStr and qemuBuildUSBHostdevUSBDevStr
static to the qemu_command.c.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

Add new function to manage adding the redirdev device options to the
command line removing that task from the mainline qemuBuildCommandLine.

Also move the qemuBuildRedirdevDevStr closer to the new function and
modify to use the const virDomainDef instead of virDomainDefPtr
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

Add new function to manage adding the watchdog device options to the
command line removing that task from the mainline qemuBuildCommandLine.

Also since qemuBuildWatchdogDevStr was only local here, make it static as
well as modifying the const virDomainDef.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

Add new function to manage adding the sound device options to the
command line removing that task from the mainline qemuBuildCommandLine.

Also since qemuBuildSoundDevStr was only local here, make it static as
well as modifying the const virDomainDef.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

These comments explain the difference between a virPCIDevice
instance used for lookups and an actual device instance; some
information is also provided for specific uses.

This is not just a cosmetic change: the name of the variable now
gives a hint about what it is supposed to be used for.

virHostdevGetPCIHostDeviceList() is similar but does not filter out
devices that are not in the active list; that said, we are looking
up the device in the active list just a few lines after anyway, so
we might as well just keep a single function around.

This also helps stress the fact the objects contained in pcidevs are
only for looking up the actual devices, which is something later
commits will make even more explicit.

The docs claims the cache attribute of the disk <driver>
element supports 'default' as one of its permissible values,
but such configuration fails virt-xml-validate. Add 'default'
as one of the cache attribute choices in domaincommon.rng.

Acronyms should be written in all caps.

We're in the hostdev module, so mgr is not an ambiguous name, and
in fact it's already used in some cases. Switch all the code over.

Take the chance to shorten declaration of
virHostdevIsPCINodeDeviceUsedData structures.

When we want to look up a device in a device list and we already
have the IDs from another source, we can simply use
virPCIDeviceListFindByIDs() instead of creating a temporary device
object.

The new order aligns better with the virHostdev prefix.

The only possible return values are true and false, so the return
type should be bool instead of int.

If 'last_processed_hostdev_vf != -1' is false then, since the
loop counter 'i' starts at 0, 'i <= last_processed_hostdev_vf'
can't possibly be true and the loop body will never be executed.

However, since 'i' is unsigned and 'last_processed_hostdev_vf'
is signed, we can't just get rid of the check completely; what
we can do is move it outside of the loop to avoid checking its
value on every iteration and cluttering the actual loop
condition.

Since commit 9c14a9ab we have broken active domain listing
because reworked prlsdkLoadDomain doesn't set dom->def->id
propely. It just looses it when a new def structure is set.
Now we make prlsdkConvertDomainState function return void
and move calling it after an old dom->def is replaces with
a new one within prlsdkLoadDomain function.
Signed-off-by: NMaxim Nestratov <mnestratov@virtuozzo.com>

This function can be called over a domain definition that has no
video configured. The
tests/qemuxml2argvdata/qemuxml2argv-minimal.xml file could serve
as an example. Problem is, before the check that domain has some
or none video configured, def->videos is dereferenced causing a
segmentation fault in case there's none video configured.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Add new function to manage adding the video device options to the
command line removing that task from the mainline qemuBuildCommandLine.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

Add new function to manage adding the input device options to the
command line removing that task from the mainline qemuBuildCommandLine.

Make qemuBuildUSBInputDevStr static since only this module calls it.

Also the change to use const virDomainDef forces other changes.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

Modify the argument order and types to match other similar helpers.

Also modify called functions to use the def->emulator instead of passing
def->emulator and def.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

Add new function to manage adding the console device options to the
command line removing that task from the mainline qemuBuildCommandLine.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

Add new function to manage adding the channel device options to the
command line removing that task from the mainline qemuBuildCommandLine.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

Add new function to manage adding the parallels device options to the
command line removing that task from the mainline qemuBuildCommandLine.
Alter logic slight to reduce indention level.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

Add new function to manage adding the serial device options to the
command line removing that task from the mainline qemuBuildCommandLine.

Using const virDomainDef causes collateral damage in other called APIs
which need to make the similar adjustment
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

Add new function to manage adding the smartcard device options to the
command line removing that task from the mainline qemuBuildCommandLine.

Alter the logic slightly to make !nsmartcards check first so that remainder
of the code is less indented.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

All other places use VIR_ERR_RPC except this one, let's be consistent,
shall we?
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

There are cases when we don't want to tell the user we are connected.
That's for example when we first connect to the server without the
command 'connect' itself.  That helps to clear out output of first
command, mainly when running non-interactively.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

Since gendisplatch can now generate "modern" *ListAll* functions, let
them all be generated.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

Until now, the script assumed that snapshot name is 'snap', but that's
going to change.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

Since we have the opportunity now, let's save some precious code lines.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

Let's call it modern_ret_as_list as opposed to single_ret_as_list.  The
latter was able to return list of things.  However the new, more modern,
version came and it is used since listAllDomains till nowadays in
ListServers.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

We were using parentheses for grouping admin|remote even though we didn't
need to capture what's in it.  That caused some changes to be greater
than needed and, to be honest, some confusion as well.  Let's use it as
it should be used.  It'll also make future changes more consistent.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

Resetting an error should be the first thing public API does.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>