This moves the socket generation if "vnc_auto_unix_socket" is set.

It also fixes a bug with this config option that we should auto-generate
socket path only if listen type is address and there is no address
specified.
Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

Even though it's auto-generated it's based on qemu.conf option and listen type
address already uses "fromConfig" to carry this information.  Following commits
will convert the socket to listen element so this rename is required because
there will be also an option to get socket auto-generated independently on the
qemu.conf option.
Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

There is no need to check again for vnc socket.
Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

Since commit 71408079, qemu agent
channel cannot be plugged in because we won't generate its path
automatically.  Let's not only fix that, but also add tests for it so
next time it's checked for.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1322210Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

Put it into separate function called qemuDomainPrepareChannel() and call
it from the new qemuProcessPrepareDomain().
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

CPUID instruction normally takes its parameter from EAX, but sometimes
ECX is used as an additional parameter. This patch prepares the x86 CPU
driver code for the new 'ecx_in' CPUID parameter.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

virCPUData, virCPUx86Feature, and virCPUx86Model all contained a pointer
to virCPUx86Data, which was not very nice since the real CPUID data were
accessible by yet another pointer from virCPUx86Data. Moreover, using
virCPUx86Data directly will make static definitions of internal CPU
features a bit easier.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

This patch splits qemuMonitorJSONGetCPUx86Data in three functions:

- qemuMonitorJSONCheckCPUx86 checks if QEMU supports reporting CPUID
  features for a guest CPU

- qemuMonitorJSONParseCPUx86Features parses CPUID features from a JSON
  array

- qemuMonitorJSONGetCPUx86Data gets the requested guest CPU property
  from QOM and uses qemuMonitorJSONParseCPUx86Features to parse it
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

CPUID instruction normally takes its parameter from EAX, but sometimes
ECX is used as an additional parameter. Let's rename 'function' to
'eax_in' in preparation for adding 'ecx_in'.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

Move qemuDomainGetBlkioParametersAssignFromDef into domain_conf
and export it, to allow reuse in the LXC driver.

The virConnectOpenInternal method opens the libvirt client
config file and uses it to resolve things like URI aliases.

There may be driver specific things that are useful to
store in the config file too, so rather than have them
re-parse the same file, pass the virConfPtr down to the
drivers.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1335617Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

In commit 1e38ef72 the disk startup policy check was moved prior to the
call to virDomainObjSetDefTransient which dropped the disk from the
config rather than the def to be started which is a bug.

Additionally we'd not report the disk change event for this since the
disk aliases were not set at that point.

Finally 'volume' based disks would not work with startup policy too.

Fix it by moving it back after the definition is copied, aliases are
assigned and disk sources are translated.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1341415

One of the functions is returning always 0 and the second one uses
unnecessary labels.

qemuProcessStart does not unset the infrastructure that retrieves errors
from the qemu log file in case of migration. As this wasn't handled
properly in qemuDomainSaveImageStartVM we kept the logging context/fd
open for the lifetime of the VM rather than closing it after it's not
needed.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1325080

Note the start of migration of a qemu process to the VM log file for
possible debug purposes.

Use qemuDomainLogAppendMessage rather than attempting to open a new
logging context with file descriptors. The new approach allows to log
the message even if qemu is still running at that point which appens
during migration finish phase where qemuProcessStop is killing qemu.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1312188

Along with the virtlogd addition of the log file appending API implement
a helper for logging one-shot entries to the log file including the
fallback approach of using direct file access.

This will be used for noting the shutdown of the qemu proces and
possibly other actions such as VM migration and other critical VM
lifecycle events.

The new flag was not added to virCheckFlags in commit '0d1c17aa' causing
a regression where VMs were not able to start.

Introduce a validation callback for qemu and move checking of
min_guarantee to the new callback.

Since it will not be called from outside of conf we can unexport it too
if we move it to the appropriate place.

Test suite change is necessary since the error will be reported sooner
now.

To avoid duplicating all the checks when starting a fresh VM from a
possibly unchecked config, call the domain def validator.

Validation of qemu process startup requires to know whether the process
is used for a fresh VM or whether it's reloaded from a
snapshot/migration. Pass this information in via a flag rather than
calculating it from a bunch of bools.

Similarly to the domain definition validator add a device validator. The
change to the prototype of the domain validator is necessary as
virDomainDeviceInfoIterateInternal requires a non-const pointer.

Until now we weren't able to add checks that would reject configuration
once accepted by the parser. This patch adds a new callback and
infrastructure to add such checks. In this patch all the places where
rejecting a now-invalid configuration wouldn't be a good idea are marked
with a new parser flag.

Make it obvious that the flag is controlling RNG schema validation.

Historically, we added heads=1 to videos, but for example for qxl, we
did not reflect that on the command line.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1283207Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

Add capabilities for both qxl and qxl-vga devices.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

Move the module from qemu_command.c to a new module virqemu.c and
rename the API to virQEMUBuildObjectCommandline.

This API will then be shareable with qemu-img and the need to build
a security object for luks support.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

Remove the live attribute and mark the definition as transient
whether the domain is runing or not.

There were only two callers left calling with live=false:
* testDomainStartState, where the domain already is active
  because we assigned vm->def->id just a few lines above the call
* virDomainObjGetPersistentDef, which now only calls
  virDomainObjSetDefTransient for an active domain

Commit b4a5fd95 introduced vram64 attribute for QXL video device but
there were two issues.  Only function
qemuMonitorJSONUpdateVideoVram64Size should update the vram64 attribute
and also the value is in MiB, not in B.
Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

There's a bug in the function. We expect the following format for
the data we are parsing here:

  key: value

So we use strchr() to find ':' and then see if it is followed by
space. But the check that does just that is slightly incorrect.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Commit ff212622 changed the error message to be more
detailed about the failure at hand; however, while the new
error message claims that "bus must be <= index", the error
message is displayed if "idx <= addr->bus", ie. when bus
is larger than or *equal to* index.

Change the error message to report the correct constraint,
and format it in a way that mirrors the check exactly to
make it clearer to people reading the code. The new error
message reads "index must be larger than bus".

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1339900

Hand-entering indexes for 20 PCI controllers is not as tedious as
manually determining and entering their PCI addresses, but it's still
annoying, and the algorithm for determining the proper index is
incredibly simple (in all cases except one) - just pick the lowest
unused index.

The one exception is USB2 controllers because multiple controllers in
the same group have the same index. For these we look to see if 1) the
most recently added USB controller is also a USB2 controller, and 2)
the group *that* controller belongs to doesn't yet have a controller
of the exact model we're just now adding - if both are true, the new
controller gets the same index, but in all other cases we just assign
the lowest unused index.

With this patch in place and combined with the automatic PCI address
assignment, we can define a PCIe switch with several ports like this:

  <controller type='pci' model='pcie-root-port'/>
  <controller type='pci' model='pcie-switch-upstream-port'/>
  <controller type='pci' model='pcie-switch-downstream-port'/>
  <controller type='pci' model='pcie-switch-downstream-port'/>
  <controller type='pci' model='pcie-switch-downstream-port'/>
  <controller type='pci' model='pcie-switch-downstream-port'/>
  <controller type='pci' model='pcie-switch-downstream-port'/>
  ...

These will each get a unique index, and PCI addresses that connect
them together appropriately with no pesky numbers required.

IS_USB2_CONTROLLER() is useful in more places aside from just when
assigning PCI addresses in QEMU, and is checking for enum values that
are all defined in conf/domain_conf.h anyway, so define it there
instead.

<os>
  <acpi>
    <table type="slic">/path/to/acpi/table/file</table>
  </acpi>
</os>

will result in:

-acpitable sig=SLIC,file=/path/to/acpi/table/file

This option was introduced by QEMU commit 8a92ea2 in 2009.

https://bugzilla.redhat.com/show_bug.cgi?id=1327537

This refactor also makes a distinction between the pointer to the
original definition and copied one to prevent mixups.