To simplify looking for a problem instrument the XML comparator function
with possibility to print the filename of the failed/expected XML
output.

This is necessary as the VIR_TEST_DIFFERENT macro possibly tests two XML
files for the inactive/active state and the resulting error may not be
obvious.

Add a comment to track which values may be present in certain members of
a struct _virDomainChrDef.

When retrieving the paths for PTY devices the alias gets formatted into
a static string. If it doesn't fit we wouldn't report an error.

Signed-off-by: NChen Fan <chen.fan.fnst@cn.fujitsu.com>
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

When creating a disk image snapshot the libvirt code would blindly copy
the parents label to the newly created image. This runs into problems
when you start a VM from an image hosted on NFS (or other storage system
that doesn't support selinux labels) and the snapshot destination is on
a storage system that does support selinux labels. Libvirt's code in
that case generates a different security label for the image hosted on
NFS. This label is valid only for NFS images and doesn't allow access in
case of a locally stored image.

To fix this issue libvirt needs to refrain from copying security
information in cases where the default domain seclabel is a better
choice.

This patch repurposes the now unused @force argument of
virStorageSourceInitChainElement to denote whether a copy of the
security labelling stuff should be attempted or not. This allows to
fine-control the copy operation for cases where we need to keep the
label of the old disk vs. the cases where we need to keep the label
unset to use the default domain imagelabel.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1151718

Commit c0e70221 breaks on a machine that lacks dbus headers:

In file included from util/virdbus.c:24:0:
util/virdbuspriv.h:31:3: error: unknown type name 'dbus_int16_t'

* src/util/virdbuspriv.h (DBusBasicValue): Only provide fallback
when dbus is compiled.
Signed-off-by: NEric Blake <eblake@redhat.com>

On 32-bit platforms with old gcc (hello RHEL 5 gcc 4.1.2), the
build fails with:
virsh-domain.c: In function 'cmdBlockCopy':
virsh-domain.c:2172: warning: comparison is always false due to limited range of data type

Adjust the code to silence the warning.

* tools/virsh-domain.c (cmdBlockCopy): Pacify RHEL 5 gcc.
Signed-off-by: NEric Blake <eblake@redhat.com>

https://bugzilla.redhat.com/show_bug.cgi?id=1152382

When libvirt create's the vport (VPORT_CREATE) for the vHBA, there isn't
enough "time" between the creation and the running of the following
backend->refreshPool after a backend->startPool in order to find the LU's.
Population of LU's happens asynchronously when udevEventHandleCallback
discovers the "new" vHBA port.  Creation of the infrastructure by udev
is an iterative process creating and discovering actual storage devices and
adjusting the environment.

Because of the time it takes to discover and set things up, the backend
refreshPool call done after the startPool call will generally fail to
find any devices. This leaves the newly started pool appear empty when
querying via 'vol-list' after startup. The "workaround" has always been
to run pool-refresh after startup (or any time thereafter) in order to
find the LU's. Depending on how quickly run after startup, this too may
not find any LUs in the pool. Eventually though given enough time and
retries it will find something if LU's exist for the vHBA.

This patch adds a thread to be executed after the VPORT_CREATE which will
attempt to find the LU's without requiring the external run of refresh-pool.
It does this by waiting for 5 seconds and searching for the LU's. If any
are found, then the thread completes; otherwise, it will retry once more
in another 5 seconds.  If none are found in that second pass, the thread
gives up.

Things learned while investigating this... No need to try and fill the
pool too quickly or too many times. Over the course of creation, the udev
code may 'add', 'change', and 'delete' the same device. So if the refresh
code runs and finds something, it may display it only to have a subsequent
refresh appear to "lose" the device. The udev processing doesn't seem to
have a way to indicate that it's all done with the creation processing of a
newly found vHBA. Only the Lone Ranger has silver bullets to fix everything.

Fix a problem in the getBlockDevice and processLU where retval initialized
to zero causing some failures to erroneously continue through to the
virStorageBackendSCSINewLun with an attempt to find a path for "/dev/(null)".
This would fail approximately 10 seconds later with debug message:

virStorageBackendSCSINewLun:203 :
     No stable path found for '/dev/(null)' in '/dev/disk/by-path'

The root cause of the issue is for many /sys/bus/scsi/devices/<lun path>
there is no "block*" device found for the vHBA's, where "<lun path>" are
the various paths created for the vHBA, such as "17:0:0:0", "17:0:1:0",
"17:0:2:0", "17:0:3:0", etc.  If the block device isn't found, then the
directory should just be ignored rather than attempting to process it.

The bug was that in getBlockDevice the assumption was "block" would exist
and either getNewStyleBlockDevice or getOldStyleBlockDevice would fill in
@block_device. However, if 'block*' doesn't exist, then the code returned
NULL for block_device *and* a good (zero) retval value.  This caused the
processLU code to attempt the virStorageBackendSCSINewLun which failed
"at some point in time" in the future.

After this change - on test system the refresh-pool didn't have a noticable
pause of about 20 seconds - it completed within a second since no longer
was there an attempt/need to find "/dev/(null)".

Additionally, the virStorageBackendSCSIFindLU's shouldn't be declaring
found unless the processLU actually returns success. This will be
important in the followup patch which relies on whether a LU was found.

The libvirt-libvirt.html file is no longer generated so
should not be referenced by the Makefile.am

Compilation on a RHEL 5 host failed, due to the older dbus headers
present on that machine, and triggered by commit 2aa167ca:

util/virdbus.c: In function 'virDBusMessageIterDecode':
util/virdbus.c:952: error: 'DBusBasicValue' undeclared (first use in this function)

* m4/virt-dbus.m4 (LIBVIRT_CHECK_DBUS): Check for DBusBasicValue.
* src/util/virdbuspriv.h (DBusBasicValue): Provide fallback.
Signed-off-by: NEric Blake <eblake@redhat.com>

getsockopt(sock->fd, SOL_SOCKET, SO_PEERCRED, ...) sets the pid to 0
when the process that opens the connection is in another container.
Signed-off-by: NGiuseppe Scrivano <gscrivan@redhat.com>

Commit dc33e6e4 caused older platforms like Fedora 20 to emit
scary log messages at startup:

2014-11-19 23:12:58.800+0000: 28906: error : virCommandWait:2532 : internal error: Child process (/usr/sbin/iptables -w -L -n) unexpected exit status 2: iptables v1.4.19.1: unknown option "-w"
Try `iptables -h' or 'iptables --help' for more information.

Since we are probing and expect to handle the case where -w is not
supported, we should not let virCommand log it as an error.

* src/util/virfirewall.c (virFirewallCheckUpdateLock): Handle
non-zero status ourselves.
Signed-off-by: NEric Blake <eblake@redhat.com>

Oops, I forgot to squash one more instance of the same check in the
previous commit (v1.2.10-144-g52691f99).

https://bugzilla.redhat.com/show_bug.cgi?id=1147331Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

When a block{pull, copy, commit} is aborted via keyboard interrupt,
the job is properly canceled followed by proper error message.
However, when the job receives an abort from another client connected
to the same domain, the error message incorrectly indicates that
a blockjob has been finished successfully, though the abort request
took effect. This patch introduces a new blockjob abort handler, which
is registered when the client calls block{copy,commit,pull} routine,
providing its caller the status of the finished blockjob.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1135442

Any attempt to start a tunnelled migration with libvirtd that supports
RDMA migration (specifically commit v1.2.8-226-ged22a474) crashes
libvirtd on the destination host.

The crash is inevitable because qemuMigrationPrepareAny is always called
with NULL protocol in case of tunnelled migration.

https://bugzilla.redhat.com/show_bug.cgi?id=1147331Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

Reported in https://bugzilla.redhat.com/show_bug.cgi?id=1165827;
dash complains:

checking for pkcheck... /usr/bin/pkcheck
checking whether pkcheck supports uid value... yes
./configure: 63906: test: xno: unexpected operator
checking for dtrace... no

* configure.ac: Use '=' not '==' in test.
Signed-off-by: NEric Blake <eblake@redhat.com>

As discussed on the upstream list, it's better not to make this
kind of predictions in libvirt. It may happen that qemu learns
how to enable OVMF on other architectures too and we shouldn't
try to chase that.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Currently, we are whitelisting architectures, that we know how to run
OVMF on. So far, only x86_64 was enabled. However, looking at qemu
code, the same commandline can be used to enable OVMF for armv7l and
aarch64.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

I noticed this while working on qemuDomainGetBlockInfo.  Assigning
a bool value to an int variable compiles fine, but raises red flags
on the maintenance front as it becomes too easy to assign -1 or 2
or any other non-bool value to the same variable.

* cfg.mk (sc_prohibit_int_assign_bool): New rule.
* src/conf/snapshot_conf.c (virDomainSnapshotRedefinePrep): Fix
offenders.
* src/qemu/qemu_driver.c (qemuDomainGetBlockInfo)
(qemuDomainSnapshotCreateXML): Likewise.
* src/test/test_driver.c (testDomainSnapshotAlignDisks):
Likewise.
* src/util/vircgroup.c (virCgroupSupportsCpuBW): Likewise.
* src/util/virpci.c (virPCIDeviceBindToStub): Likewise.
* src/util/virutil.c (virIsCapableVport): Likewise.
* tools/virsh-domain-monitor.c (cmdDomMemStat): Likewise.
* tools/virsh-domain.c (cmdBlockResize, cmdScreenshot)
(cmdInjectNMI, cmdSendKey, cmdSendProcessSignal)
(cmdDetachInterface): Likewise.
Signed-off-by: NEric Blake <eblake@redhat.com>

Use of an 'int' to represent a 'bool' value is confusing.  Just
because dbus made the mistake of cementing their 4-byte wire
format of dbus_bool_t into their API doesn't mean we have to
repeat the mistake.  With a little bit of finesse, we can
guarantee that we provide a large-enough value to the DBus
code, while still copying only the relevant one-byte bool
to the client code, and isolate the rest of our code base from
the DBus stupidity.

* src/util/virdbus.c (GET_NEXT_VAL): Add parameter.
(virDBusMessageIterDecode): Adjust all clients.
* src/util/virpolkit.c (virPolkitCheckAuth): Use nicer type.
* tests/virdbustest.c (testMessageSimple, testMessageStruct):
Test new behavior.
Signed-off-by: NEric Blake <eblake@redhat.com>

Signed-off-by: NChen Hanxiao <chenhanxiao@cn.fujitsu.com>

This function returned non-inactive domains instead of active
domains.  This broke virConnectNumOfDefinedDomains() and
virConnectListDefinedDomains() functions.

Ethernet interfaces in libvirt currently do not support bandwidth setting.
For example, following xml file for an interface will not apply these
settings to corresponding qdiscs.

    <interface type="ethernet">
      <mac address="02:36:1d:18:2a:e4"/>
      <model type="virtio"/>
      <script path=""/>
      <target dev="tap361d182a-e4"/>
      <bandwidth>
        <inbound average="984" peak="1024" burst="64"/>
        <outbound average="2000" peak="2048" burst="128"/>
      </bandwidth>
    </interface>
Signed-off-by: NAnirban Chakraborty <abchak@juniper.net>
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Since 1.2.8 it's possible to use OVMF on domains. Moreover, it's
possible to have libvirt create NVRAM file per domain. Later,
when domain is undefined, the file is removed too. However,
things are a bit complicated when domain's transient. There's no
undefine to transient domains. There are two options: 1) leave
the file behind and let mgmt app remove it. 2) remove it
automatically as domain dies.
But, in some scenarios mgmt app may want to preserve the file,
copy it somewhere safe, and then copy it back when the domain is
starting again. And this wouldn't be possible with case 2). So,
even though case 1) leaves some files behind (possibly undeleted
for a long time), the files themselves are small (128K each). And
data loss is worse than full disk, isn't it?
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

For some reason, commit id '72b4151f' triggered a Coverity uninitialized
'reply' variable check when referenced within the for loop.

It seems Coverity doesn't know that flags will have to be either AFFECT_LIVE
or AFFECT_CONFIG after the virDomainLiveConfigHelperMethod call.

By adding a "sa_assert()" to confirm that fact, Coverity is happy again.

https://bugzilla.redhat.com/show_bug.cgi?id=1164080

After a disk is hotunplugged a subsequent call to qemuDomainGetBlockIoTune
to get the --config settings of that disk will fail because the disk is no
longer found by qemuDiskPathToAlias causing an unexpected failure.

Since only the --live flag needs to have the disk device pointer, move the
fetch inside the (flags & VIR_DOMAIN_AFFECT_LIVE) condition. This will also
affect the results if no flags are provided or the --current flag is provided.
Signed-off-by: NLuyao Huang <lhuang@redhat.com>

The recent commit to add support for block_set_io_throttle parameters
from version 1.7 of qemu did not add any tests - this adds the tests
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

Seems the 'size_iops_sec' was a late add and the checks for whether
the field was defined, but unsupported and the maximum size of the
field were not being made.

Also, adjust blkdeviotune support error message for grammar, spelling
(paramater), and remove the "(need QEMU 1.7 or superior)".  None of
our other similar error messages list which QEMU version is required.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

We're looking for three consecutive lines, first one is a if/for/while
with a condition and start of body, second one is a body with one and
only semicolon and third is end of the body by itself.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

Change while () { smth; last; } to if () { smth; } as 'last' in perl is
analogous to 'break' in C.  These are probably copy-paste leftovers from
creating new syntax-check rules.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

In bracket-spacing.pl, the current $line is being modified in $data.
That, however, spoils that $data for another check.  Introduce new
$tmpdata variable that can be used for temporary modifications.  The
difference between $data and $line is that $data are as much cleaned as
possible from non-code blocks and these changes must be kept.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

After recent discussion it looks like curly brackets around one-line
bodies are preferred if the preceding condition is, itself, multiline.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>