Adding $(prefix) in Makefile.am, as we were doing, means that
it would be prepended even when using --with-ws-plugindir,
which is something we don't want to happen.

Instead, we add it beforehand but take care that it doesn't
get expanded until make is called.

Even when we're building $plugindir ourselves because we can't
retrieve it using pkg-config, we still want to strip the prefix,
except in that case it would be the same prefix we're using for
building libvirt.

The fact that $plugindir is missing also doesn't tell us
anything about $ws_prefix, so we have to handle the two variables
separately.

Keep all variable declarations close together.

Use a separate variable instead of setting it inline for
slightly cleaner code.

Support for virtio disks was added in commit id 'fceeeda2', but not for
SCSI drives. Add the secret for the server when hotplugging a SCSI drive.
No need to make any adjustments for unplug since that's handled during
the qemuDomainDetachDiskDevice call to qemuDomainRemoveDiskDevice in
the qemuDomainDetachDeviceDiskLive switch.

Added a test to/for the command line processing to show the command line
options when adding a SCSI drive for the guest.

https://bugzilla.redhat.com/show_bug.cgi?id=1300776

Complete the implementation of support for TLS encryption on
chardev TCP transports by adding the hotplug ability of a secret
to generate the passwordid for the TLS object for chrdev, RNG,
and redirdev.

Fix up the order of object removal on failure to be the inverse
of the attempted attach (for redirdev, chr, rng) - for each the
tls object was being removed before the chardev backend.

Likewise, add the ability to hot unplug that secret object as well
and be sure the order of unplug matches that inverse order of plug.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

Add the secret object so the 'passwordid=' can be added if the command line
if there's a secret defined in/on the host for TCP chardev TLS objects.

Preparation for the secret involves adding the secinfo to the char source
device prior to command line processing. There are multiple possibilities
for TCP chardev source backend usage.

Add test for at least a serial chardev as an example.

Commit id '6e6b4bfc' added the object, but forgot the other end.

Need to remove the drive first, then the secobj and/or encobj if they exist.
This is because the drive has a dependency on secobj (or the secret for
the networked storage server) and/or the encobj (or the secret for the
LUKS encrypted volume).  Deleting either object first leaves an drive
without it's respective objects.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

https://bugzilla.redhat.com/show_bug.cgi?id=1349898

Add the duration parameters to the virsh input/output for blkdeviotune
command and describe them in the pod file.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

Rework the repetitive lines to add iotune values into easier to read macros.
One to handle the SCALED values and one to handle the non scaled values.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

Add in the block I/O throttling length/duration parameter to the command
line if supported. If not supported, fail command creation.

Add the xml2argvtest for testing.

Modify _virDomainBlockIoTuneInfo and rng schema to support the _length
options for bps/iops throttling values. Document the new values.

Add support for a duration/length for the bps/iops and friends.

Modify the API in order to add the "blkdeviotune." specific definitions
for the iotune throttling duration/length options

    total_bytes_sec_max_length
    write_bytes_sec_max_length
    read_bytes_sec_max_length
    total_iops_sec_max_length
    write_iops_sec_max_length
    read_iops_sec_max_length

Add the capability to detect if the qemu binary can support the feature
to use bps-max-length and friends.

Add new options to allow proving a duration/length in seconds to allow the
bps/iops (and friends) to occur:

    total_bytes_sec_max_length
    write_bytes_sec_max_length
    read_bytes_sec_max_length
    total_iops_sec_max_length
    write_iops_sec_max_length
    read_iops_sec_max_length

Add continue for compiler hint to return to for control

Create a helper to set the bytes/iops iotune default values based on
the current qemu setting for both the live and persistent definitions.
NB: This also fixes an unreported bug where the persistent values for
*_max and size_iops_sec would be set back to 0 if unrelated persistent
values were set.

Since persistent_def is the only place that uses it, let's just keep
it closer to where it's used.

This patch will also adjust the qemuMonitorJSONSetBlockIoThrottle error
procession so that rather than returning/displaying:

    "error: internal error: Unexpected error"

Fetch the actual error message from qemu and display that

Create a macros to hide all the comparisons for each of the fields.

Add a 'continue;' for a compiler hint that we only need to find one
this should be similar enough to the if - elseif - elseif logic.

Commit id '2c322378' added the TLS object removal to the DetachChrDevice
all when it should have been added to the RemoveChrDevice since that's
the norm for similar processing (e.g. disk)
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

After succesfully reading an outdated caps cache from disk,
calling virQEMUCapsReset did not properly clear out the calculated
host CPU model. This lead to a memory leak when the host CPU model
pointer was overwritten later in virQEMUCapsNewForBinaryInternal.

Introduced by commit 68c70118.

Although the migration port is immediately released in the
finish phase of migration, it was never set in the domain
private object when allocated in the prepare phase. So
libxlDomainMigrationFinish() always released a 0-initialized
migrationPort, leaking any allocated port. After enough
migrations to exhaust the migration port pool, migration would
fail with

error: internal error: Unable to find an unused port in range
       'migration' (49152-49216)

Fix it by setting libxlDomainObjPrivate->migrationPort to the
port allocated in the prepare phase. While at it, also fix
leaking an allocated port if the prepare phase fails.

Added description for new vcpu.<num>.halted statistics value.
While there, also added a description for vcpu.<num>.wait and
clarified the units displayed for time and wait.
Signed-off-by: NViktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
Reviewed-by: NBjoern Walk <bwalk@linux.vnet.ibm.com>

Extended qemuDomainGetStatsVcpu to include the per vcpu halted
indicator if reported by QEMU. The key for new boolean value
has the format "vcpu.<n>.halted".
Signed-off-by: NViktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
Reviewed-by: NBjoern Walk <bwalk@linux.vnet.ibm.com>

Adding a field to the domain's private vcpu object to hold the halted
state information.
Adding two functions in support of the halted state:
- qemuDomainGetVcpuHalted: retrieve the halted state from a
  private vcpu object
- qemuDomainRefreshVcpuHalted: obtain the per-vcpu halted states
  via qemu monitor and store the results in the private vcpu objects
Signed-off-by: NViktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
Reviewed-by: NBjoern Walk <bwalk@linux.vnet.ibm.com>
Reviewed-by: NHao QingFeng <haoqf@linux.vnet.ibm.com>
Signed-off-by: NBoris Fiuczynski <fiuczy@linux.vnet.ibm.com>

Extended the qemuMonitorCPUInfo with a halted flag. Extract the halted
flag for both text and JSON monitor.
Signed-off-by: NViktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
Signed-off-by: NBoris Fiuczynski <fiuczy@linux.vnet.ibm.com>

An upcoming commit will remove the "flag" argument from all the calls
to reserve the next available address|slot, but I don't want to change
the arguments in the hypervisor-agnostic
virDomainPCIAddressReserveNext*() functions, so this patch places a
simple qemu-specific wrapper around those functions - the new
functions don't take a flags arg, but grab it from the device's
info->pciConnectFlags.

This function is no longer needed outside of domain_addr.c.

instead of calling virDomainPCIAddressGetNextSlot() (which I want to
turn into a local static in domain_addr.c).

There is an existing virDomainPCIAddressReserveNextSlot() which will
reserve all functions of the next available PCI slot. One place in the
qemu PCI address assignment code requires reserving a *single*
function of the next available PCI slot. This patch modifies and
renames virDomainPCIAddressReserveNextSlot() so that it can fulfill
both the original purpose and the need to reserve a single function.

(This is being done so that the abovementioned code in qemu can have
its "kind of open coded" solution replaced with a call to this new
function).

Since TLS was introduced hostwide for libvirt 2.3.0 and a domain
configurable haveTLS was implemented for libvirt 2.4.0, we have to
modify the migratable XML for specific case where the 'tls' attribute
is based on setting from qemu.conf.

The "tlsFromConfig" is libvirt internal attribute and is stored only in
status XML to ensure that when libvirtd is restarted this internal flag
is not lost by the restart.

That flag is used to decide whether we should put *tls* attribute to
migratable XML or not.
Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

Add an optional "tls='yes|no'" attribute for a TCP chardev.

For QEMU, this will allow for disabling the host config setting of the
'chardev_tls' for a domain chardev channel by setting the value to "no" or
to attempt to use a host TLS environment when setting the value to "yes"
when the host config 'chardev_tls' setting is disabled, but a TLS environment
is configured via either the host config 'chardev_tls_x509_cert_dir' or
'default_tls_x509_cert_dir'
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>
Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

Currently the union has only one member so remove that union.  If there
is a need to add a new type of source for new bus in the future this
will force the author to add a union and properly check bus type before
any access to union member.
Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

Commit id '2c322378' missed the nuance that the rng backend could be
using a TCP chardev and if TLS is enabled on the host, thus will need
to have the TLS object added.

Commit id '2c322378' missed the nuance that the redirdev backend could
be using a TCP chardev and if TLS is enabled on the host, thus will need
to have the TLS object added.

It's about to get more complicated - let's alter the logic to handle
various failures. Adds saving of the error as well.

As it turns out more than one place will need these objects, so rather
than cut-copy-paste in each, make a helper

Rather than VIR_ALLOC() the data, use virDomainChrSourceDefNew in order
to get the private data if necessary.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>