A domain's <interface> or <hostdev>, as well as a <network>'s
<forward>, can now have an optional <driver name='kvm|vfio'/>
element. As of this patch, there is no functionality behind this new
knob - this patch adds support to the domain and network
formatter/parser, and to the RNG and documentation.

When the backend is added, legacy KVM PCI device assignment will
continue to be used when no driver name is specified (or if <driver
name='kvm'/> is specified), but if driver name is 'vfio', the new UEFI
Secure Boot compatible VFIO device assignment will be used.

Note that the parser doesn't automatically insert the current default
value of this setting. This is done on purpose because the two
possibilities are functionally equivalent from the guest's point of
view, and we want to be able to automatically start using vfio as the
default (even for existing domains) at some time in the future. This
is similar to what was done with the "vhost" driver option in
<interface>.

There will soon be other items related to pci hostdevs that need to be
in the same part of the hostdevsubsys union as the pci address (which
is currently a single member called "pci". This patch replaces the
single member named pci with a struct named pci that contains a single
member named "addr".

QEMU_CAPS_DEVICE_VFIO_PCI is set if the device named "vfio-pci" is
supported in the qemu binary.

QEMU_CAPS_VFIO_PCI_BOOTINDEX is set if the vfio-pci device supports
the "bootindex" parameter;  for some reason, the bootindex parameter
wasn't included in early versions of vfio support (qemu 1.4) so we
have to check for it separately from vfio itself.

POSIX says that both basename() and dirname() may return static
storage (aka they need not be thread-safe); and that they may but
not must modify their input argument.  Furthermore, <libgen.h>
is not available on all platforms.  For these reasons, you should
never use these functions in a multi-threaded library.

Gnulib instead recommends a way to avoid the portability nightmare:
gnulib's "dirname.h" provides useful thread-safe counterparts.  The
obvious dir_name() and base_name() are GPL (because they malloc(),
but call exit() on failure) so we can't use them; but the LGPL
variants mdir_name() (malloc's or returns NULL) and last_component
(always points into the incoming string without modifying it,
differing from basename semantics only on corner cases like the
empty string that we shouldn't be hitting in the first place) are
already in use in libvirt.  This finishes the swap over to the safe
functions.

* cfg.mk (sc_prohibit_libgen): New rule.
* src/util/vircgroup.c: Fix offenders.
* src/parallels/parallels_storage.c (parallelsPoolAddByDomain):
Likewise.
* src/parallels/parallels_network.c (parallelsGetBridgedNetInfo):
Likewise.
* src/node_device/node_device_udev.c (udevProcessSCSIHost)
(udevProcessSCSIDevice): Likewise.
* src/storage/storage_backend_disk.c
(virStorageBackendDiskDeleteVol): Likewise.
* src/util/virpci.c (virPCIGetDeviceAddressFromSysfsLink):
Likewise.
* src/util/virstoragefile.h (_virStorageFileMetadata): Avoid false
positive.
Signed-off-by: NEric Blake <eblake@redhat.com>

It was written VIR_DOMAIN_EVENT_ID_PMSuspend

The previous description was a bit confusing.

Jim Fehlig reported on IRC that older gcc/glibc triggers this warning:

cc1: warnings being treated as errors
qemu/qemu_domain.c: In function 'qemuDomainDefFormatBuf':
qemu/qemu_domain.c:1297: error: declaration of 'remove' shadows a global declaration [-Wshadow]
/usr/include/stdio.h:157: error: shadowed declaration is here [-Wshadow]
make[3]: *** [libvirt_driver_qemu_impl_la-qemu_domain.lo] Error 1

Fix it like we have done in the past (such as commit 2e6322a7).

* src/qemu/qemu_domain.c (qemuDomainDefFormatBuf): Avoid shadowing
a function name.
Signed-off-by: NEric Blake <eblake@redhat.com>

Use a pair of 'memballoon' tags instead of single 'watchdog' one.
Add a few missing colons.

Reject multiple controllers with the same index,
except for USB controllers.
Multi-function USB controllers can have the same index.

Commit b33eb0dc missed this machine type.

Signed-off-by: NBamvor Jian Zhang <bjzhang@suse.com>

When all usb controllers connected to the same bus have <master
startport='x'/> specified, none of them have 'id=usb' assigned and
thus qemu fails due to invalid masterport specification (we use 'usb'
for that purpose).  Adding a check that at least one of the
controllers is specified without <master startport='x'/> and in case
this happens, error out due to invalid configuration.

After 9d6e56db the syntax-check was unhappy due to wrong whitespacing:

  src/qemu/qemu_command.c:1637: for ( ; a.slot < QEMU_PCI_ADDRESS_SLOT_LAST; a.slot++) {
  maint.mk: incorrect whitespace around brackets, see HACKING for rules
  make: *** [bracket-spacing-check] Error 1

After 78d7c3c5 we are strdup()-ing path to qemu-bridge-helper.
However, the check for its return value is missing. So it is
possible we've ignored the OOM error silently.

Add a "dry run" address allocation to figure out how many bridges
will be needed for all the devices without explicit addresses.

Auto-add just enough bridges to put all the devices on, or up to the
bridge with the largest specified index.

<controller type='pci' index='0' model='pci-root'/>
is auto-added to pc* machine types.
Without this controller PCI bus 0 is not available and
no PCI addresses are assigned by default.

Since older libvirt supported PCI bus 0 even without
this controller, it is removed from the XML when migrating.

Signed-off-by: NJán Tomko <jtomko@redhat.com>

Add new controller type 'pci' with models 'pci-root' and 'pci-bridge'.

Now we set the default disk driver name when parsing
the qemu command line too, hence all the test changes.

Assume format type is 'auto' when none is specified on
qemu command line.

Pushed under trivial rule.

This patch is to add command line builder and parser
for NVRAM device, and add test cases.
Signed-off-by: NLi Zhang <zhlcindy@linux.vnet.ibm.com>

For pSeries guest in QEMU, NVRAM is one kind of spapr-vio device.
Users are allowed to specify spapr-vio devices'address.
But NVRAM is not supported in libvirt. So this patch is to
add NVRAM device to allow users to specify its address.

In QEMU, NVRAM device's address is specified by
 "-global spapr-nvram.reg=xxxxx".

In libvirt, XML file is defined as the following:

  <nvram>
    <address type='spapr-vio' reg='0x3000'/>
  </nvram>
Signed-off-by: NLi Zhang <zhlcindy@linux.vnet.ibm.com>

Currently, if there has been an error in building command line
process after virtual interfaces has been created, the flow jumps
to 'error' label, where virDomainConfNWFilterTeardown() is
called. This may report an error as well, but should not
overwrite the original cause why we jumped to 'error' label.

State what fields are used when generating SELinux labels from a
baselabel.

Like what we did for "disk", "filesystem" and "interface", this
introduces sub-element <driver> for "controller", and put the "queues"
into it.

This for example prohibits you to use iotune for Ceph or Sheepdog devices.
Signed-off-by: NWido den Hollander <wido@widodh.nl>

Instead of making a choice between the underscore and camelCase, this
simply changes "num_queues" into "queues", which is also consistent
with Michal's multiple queue support for interface.

Instead of a silent warning, it's better to error out if the
numa nodeset is out of range. Just like for numa node larger
than NUMA_NUM_NODES.

Since cbe67ff9
virSecuritySELinuxGenNewContext reports good error messages. Fix callers
that mask the errors by generic error message.

Improve error reporting and generating of SPICE command line arguments
according to the need to enable TLS. If TLS is disabled, there's no need
to pass the certificate dir to qemu.

This patch resolves:
https://bugzilla.redhat.com/show_bug.cgi?id=953126

With this patch, if the autoport attribute is used, the code will
sensibly auto allocate the ports only if needed.

Ensure that all drivers implementing public APIs use a
naming convention for their implementation that matches
the public API name.

eg for the public API   virDomainCreate make sure QEMU
uses qemuDomainCreate and not qemuDomainStart
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

It will simplify later work if the sub-drivers have dedicated
APIs / field names. ie virNetworkDriver should have
virDrvNetworkOpen and virDrvNetworkClose methods
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

The driver.h struct for node devices used an inconsistent
naming scheme 'DeviceMonitor' instead of the more usual
'NodeDeviceDriver'. Fix this everywhere it has leaked
out to.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

The driver.h file has no consistent indentation usage across
all the typedefs. Attempts to vertically align struct field
members have also been inconsistently applied. Sanitize the
whitespace used for typedefs & remove all vertical alignment
from structs
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Ensure that the driver struct field names match the public
API names. For an API virXXXX we must have a driver struct
field xXXXX. ie strip the leading 'vir' and lowercase any
leading uppercase letters.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Ensure that the virDrvXXX method names exactly match
the public APIs virYYY method names. ie XXX == YYY.
Add a test case to prevent any regressions.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

A number of the remote procedure names did not match the
corresponding API names. For example, many lacked the
word 'CONNECT', others re-arranged the names. Update the
procedures so their names exactly match the API names.
Then remove the special case handling of these APIs in
the generator
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

There are many declared options in gendispatch.pl that were
no longer used. Those which were used were obscure '-b', '-k'
and '-d'. Switch to use --mode={debug|client|server}.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Later on this function will be used to do more sophisticated checks and
determination if port allocation is needed.