Introduce libvirt support for Xen HVM Viridian (Hyper-V) enlightenment
interface guest feature.

 src/conf/domain_conf.c     |    3 ++-
 src/conf/domain_conf.h     |    1 +
 src/xen/xen_hypervisor.c   |   11 +++++++++++
 src/xenapi/xenapi_driver.c |    2 ++
 src/xenapi/xenapi_utils.c  |    2 ++
 src/xenxs/xen_sxpr.c       |    4 ++++
 src/xenxs/xen_xm.c         |   12 +++++++++++-
 7 files changed, 33 insertions(+), 2 deletions(-)

This reduces things from O(n^2) to O(n).

* tools/virsh.c (vshCommandOptArgv): Change signature.
(cmdEcho): Update caller.
Based on a patch by Lai Jiangshan.

The LXC driver networking uses veth device pairs. These can
be easily hooked into the network filtering code.

* src/lxc/lxc_driver.c: Add calls to setup/teardown nwfilter

The algorithm for autoassigning vethXXX devices, was always
skipping over the starting dev index when finding a free
name for the guest device. This should only be done if the host
device was autoallocated.

* src/lxc/veth.c: Don't skip over veth indexes

Prefer bootindex=N option for -device over the old way -boot ORDER
possibly accompanied with boot=on option for -drive. This gives us full
control over which device will actually be used for booting guest OS.
Moreover, if qemu doesn't support boot=on, this is the only way to boot
of certain disks in some configurations (such as virtio disks when used
together IDE disks) without transforming domain XML to use per device
boot elements.

When an operation started by virDomainBlockPullAll completes (either with
success or with failure), raise an event to indicate the final status.  This
allows an API user to avoid polling on virDomainBlockPullInfo if they would
prefer to use the event mechanism.

* daemon/remote.c: Dispatch events to client
* include/libvirt/libvirt.h.in: Define event ID and callback signature
* src/conf/domain_event.c, src/conf/domain_event.h,
  src/libvirt_private.syms: Extend API to handle the new event
* src/qemu/qemu_driver.c: Connect to the QEMU monitor event
  for block_stream completion and emit a libvirt block pull event
* src/remote/remote_driver.c: Receive and dispatch events to application
* src/remote/remote_protocol.x: Wire protocol definition for the event
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h,
  src/qemu/qemu_monitor_json.c: Watch for BLOCK_STREAM_COMPLETED event
  from QEMU monitor
Signed-off-by: NAdam Litke <agl@us.ibm.com>

virDomainBlockPullAll and virDomainBlockPullAbort are handled automatically.
virDomainBlockPull and virDomainBlockPullInfo require manual overrides since
they return a custom type.

* python/generator.py: reenable bindings for this entry point
* python/libvirt-override-api.xml python/libvirt-override.c:
  manual overrides
Signed-off-by: NAdam Litke <agl@us.ibm.com>
Acked-by: NDaniel P. Berrange <berrange@redhat.com>

Define two new virsh commands:
 * blockpull: Perform block pull operations (incremental plus start
              and stop continuous streams)
 * blockpullinfo: Retrieve progress info for continuous block pull

Share print_job_progress() with the migration code.

* tools/virsh.c: implement the new commands
Signed-off-by: NAdam Litke <agl@us.ibm.com>

The virDomainBlockPull* family of commands are enabled by the
'block_stream' and 'info block_stream' qemu monitor commands.

* src/qemu/qemu_driver.c src/qemu/qemu_monitor_text.[ch]: implement disk
  streaming by using the stream and info stream text monitor commands
* src/qemu/qemu_monitor_json.[ch]: implement commands using the qmp monitor
Signed-off-by: NAdam Litke <agl@us.ibm.com>
Acked-by: NDaniel P. Berrange <berrange@redhat.com>

The generator can handle DomainBlockPullAll and DomainBlockPullAbort.
DomainBlockPull and DomainBlockPullInfo must be written by hand.

* src/remote/remote_protocol.x: provide defines for the new entry points
* src/remote/remote_driver.c daemon/remote.c: implement the client and
  server side
* src/remote_protocol-structs: structure definitions for protocol verification
Signed-off-by: NAdam Litke <agl@us.ibm.com>

* src/libvirt.c: implement the main entry points
Signed-off-by: NAdam Litke <agl@us.ibm.com>
Acked-by: NDaniel P. Berrange <berrange@redhat.com>

Set up the types for the block pull functions and insert them into the
virDriver structure definition.  Symbols are exported in this patch to prevent
documentation compile failures.

* include/libvirt/libvirt.h.in: new API
* src/driver.h: add the new entry to the driver structure
* python/generator.py: fix compiler errors, the actual python bindings are
  implemented later
* src/libvirt_public.syms: export symbols
Signed-off-by: NAdam Litke <agl@us.ibm.com>

From a security pov copy and paste between the guest and the client is not
always desirable. So we need to be able to enable/disable this. The best place
to do this from an administration pov is on the hypervisor, so the qemu cmdline
is getting a spice disable-copy-paste option, see bug 693645. Example qemu
invocation:
qemu -spice port=5932,disable-ticketing,disable-copy-paste

https://bugzilla.redhat.com/show_bug.cgi?id=693661

Signed-off-by: NMinoru Usui <usui@mxm.nes.nec.co.jp>

Signed-off-by: NMinoru Usui <usui@mxm.nes.nec.co.jp>

Signed-off-by: NMinoru Usui <usui@mxm.nes.nec.co.jp>

Signed-off-by: NMinoru Usui <usui@mxm.nes.nec.co.jp>

Signed-off-by: NMinoru Usui <usui@mxm.nes.nec.co.jp>

Signed-off-by: NMinoru Usui <usui@mxm.nes.nec.co.jp>

Signed-off-by: NMinoru Usui <usui@mxm.nes.nec.co.jp>

Signed-off-by: NMinoru Usui <usui@mxm.nes.nec.co.jp>

Signed-off-by: NMinoru Usui <usui@mxm.nes.nec.co.jp>

Signed-off-by: NMinoru Usui <usui@mxm.nes.nec.co.jp>

Signed-off-by: NMinoru Usui <usui@mxm.nes.nec.co.jp>

Signed-off-by: NMinoru Usui <usui@mxm.nes.nec.co.jp>

since the testfiles assume a /proc/cpuinfo specific to this
architecture. We e.g. can't parse the number of cores on other
architectures.

Drivers load running persistent and transient domain configs before
inactive persistent domain configs, however only the latter would set a
domain's autostart flag. This mismatch between the loaded and on-disk
state could later cause problems with "virsh autostart":

  # virsh autostart example
  error: Failed to mark domain example as autostarted
  error: Failed to create symlink '/etc/libvirt/qemu/autostart/example.xml to '/etc/libvirt/qemu/example.xml': File exists

This patch ensures the autostart flag is set correctly even when the
domain is already defined.

Fixes:

  https://bugzilla.redhat.com/show_bug.cgi?id=632100
  https://bugzilla.redhat.com/show_bug.cgi?id=675319Signed-off-by: NMichael Chapman <mike@very.puzzling.org>

Signed-off-by: NLai Jiangshan <laijs@cn.fujitsu.com>

Signed-off-by: NLai Jiangshan <laijs@cn.fujitsu.com>

Signed-off-by: NLai Jiangshan <laijs@cn.fujitsu.com>

Add public virDomainSendKey() and enum libvirt_keycode_set
for the @codeset.

Python version of virDomainSendKey() has not been implemented yet,
it will be done soon.
Signed-off-by: NLai Jiangshan <laijs@cn.fujitsu.com>

Signed-off-by: NLai Jiangshan <laijs@cn.fujitsu.com>

A VSH_OFLAG_REQ_OPT option means --optionname is required when used.
It will kill any ambiguity, even a !VSH_OFLAG_REQ option listed before
a VSH_OFLAG_REQ option, if the !VSH_OFLAG_REQ option is a
VSH_OFLAG_REQ_OPT option.

It will help us use optional argument with VSH_OT_ARGV argument.
Signed-off-by: NLai Jiangshan <laijs@cn.fujitsu.com>

A name will improve the usege, example

# virsh help echo
  NAME
    echo - echo arguments

  SYNOPSIS
    echo [--shell] [--xml] [<string>]...

  DESCRIPTION
    Echo back arguments, possibly with quoting.

  OPTIONS
    --shell          escape for shell use
    --xml            escape for XML use
    <string>         arguments to echo

"[<string>]..." is added to SYNOPSIS.
"<string>         arguments to echo" is added to OPTIONS.
Signed-off-by: NLai Jiangshan <laijs@cn.fujitsu.com>

Added:
* Virt ruby bindings
* Foreman for provisioning and webui.

Suggested here:
https://www.redhat.com/archives/libvir-list/2011-May/msg00594.html

* src/storage/storage_backend.c (virStorageBackendCreateQemuImg):
Generate size inline.

Previously, the parent process opened 'null' to /dev/null, then
the child process closes 'null' as well as 'childout'.  But if
childout was set to be null, then this is a double close.  At
least the double close was confined to the child process after a
fork, and therefore there is no risk of another thread opening
an fd of the same value to be bitten by the double close, but it
is always better to avoid double-close to begin with.

Additionally, if all three fds were specified, then opening
'null' was wasted.

This patch fixes things to lazily open null on the first use,
then guarantees it gets closed exactly once.

* src/util/command.c (getDevNull): New helper function.
(virExecWithHook): Use it to avoid spurious opens and double close.

This also reduces malloc pressure for invoking a child when
VIR_DEBUG is enabled.

* src/util/command.c (virExecWithHook): Drop debug, since the only
caller (virCommandRunAsync) also prints debug info.

* include/libvirt/libvirt.h.in (virDomainModificationImpact): Reword.

If qemu supports -chardev, our char frontend aliases are ex. 'charserial0'
not just 'serial0'. Typically we don't use this code path because the
pty's are scraped from stdout.