We want to pass the proper opaque pointer instead of NULL to
virDomainDefParse and subsequently virDomainDefParseNode too.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Adding tests for domXML <-> xl.cfg conversions containing multiple
serial devices.
Signed-off-by: NBob Liu <bob.liu@oracle.com>

libxl configuration files conversion can now handle USB controllers.
When parting libxl config file, USB controllers with type PV are
ignored as those aren't handled.
Signed-off-by: NChunyan Liu <cyliu@suse.com>

Signed-off-by: NChunyan Liu <cyliu@suse.com>
Signed-off-by: NJim Fehlig <jfehlig@suse.com>

Add support to xenconfig for conversion of xl.cfg(5) bios config
to/from libvirt domXml <loader> config. SeaBIOS is the default
for HVM guests using upstream QEMU. ROMBIOS is the default when
using the old qemu-dm. This patch allows specifying OVMF as an
alternate firmware.

Example xl.cfg:
  bios = "ovmf"

Example domXML:
  <os>
    ...
    <loader readonly='yes' type='pflash'>/usr/lib/xen/boot/ovmf.bin</loader>
  </os>

Note that currently Xen does not support a separate nvram for
non-volatile variables.
Signed-off-by: NJim Fehlig <jfehlig@suse.com>

This function doesn't follow our convention of naming functions.

This function doesn't follow our convention of naming functions.

This function doesn't follow our convention of naming functions.

Signed-off-by: NChunyan Liu <cyliu@suse.com>

hap is enabled by default in xm and xl config and usually only
specified when it is desirable to disable hap (hap = 0). Change
the xm,xl <-> xml converter to behave similarly. I.e. only
produce 'hap = 0' when <hap state='off'/> and vice versa.
Signed-off-by: NJim Fehlig <jfehlig@suse.com>

The target= setting in xl disk configuration can be used to encode
meta info that is meaningful to a backend. Leverage this fact to
support qdisk network disk types such as rbd. E.g. <disk> config
such as

   <disk type='network' device='disk'>
     <driver name='qemu' type='raw'/>
     <source protocol='rbd' name='pool/image'>
       <host name='mon1.example.org' port='6321'/>
       <host name='mon2.example.org' port='6322'/>
       <host name='mon3.example.org' port='6322'/>
     </source>
     <target dev='hdb' bus='ide'/>
     <address type='drive' controller='0' bus='0' target='0' unit='1'/>
   </disk>

can be converted to the following xl config (and vice versa)

  disk = [ "format=raw,vdev=hdb,access=rw,backendtype=qdisk,
            target=rbd:pool/image:auth_supported=none:mon_host=mon1.example.org\\:6321\\;mon2.example.org\\:6322\\;mon3.example.org\\:6322"
         ]

Note that in xl disk config, a literal backslash in target= must
be escaped with a backslash. Conversion of <auth> config is not
handled in this patch, but can be done in a follow-up patch.

Also add a test for the conversions.
Signed-off-by: NJim Fehlig <jfehlig@suse.com>

The most formal form of xl disk configuration uses key=value
syntax to define each configuration item, e.g.

format=raw, vdev=xvda, access=rw, backendtype=phy, target=disksrc

Change the xl disk formatter to produce this syntax, which allows
target= to contain meta info needed to setup a network-based
disksrc (e.g. rbd, nbd, iscsi). For details on xl disk config
format, see  $xen-src/docs/misc/xl-disk-configuration.txt

Update the disk config in the tests to use the formal syntax.
But add tests to ensure disks specified with the positional
parameter syntax are correctly converted to <disk> XML.
Signed-off-by: NJim Fehlig <jfehlig@suse.com>

While at it, improve a few comments. No functional change.
Signed-off-by: NJim Fehlig <jfehlig@suse.com>

And use the newly added caps->host.netprefix (if it exists) for
interface names that match the autogenerated target names.
Signed-off-by: NJoao Martins <joao.m.martins@oracle.com>

... and consolidate the cmdline/extra/root parsing to facilitate doing
so.

The logic is the same as xl's parse_cmdline from the current xen.git master
branch (e6f0e099d2c17de47fd86e817b1998db903cab61).

On the formatting side switch to producing cmdline= instead of extra=.

Update a few tests and add serveral more.
  - test-cmdline is added to test the exclusive use of cmdline.
  - test-fullvirt-direct-kernel-boot.cfg is updated due to the switch
    on the formatting side and now tests the exclusive use of cmdline=.
  - Tests are added for both paravirt and fullvirt where the .cfg uses
    extra= and (paravirt only) root=. These are format (xl->xml) only
    since the inverse will generate cmdline= hence is not a round trip
    (which was already true if using root=, which used to generate
    extra= on the way back).
  - Tests are added for both paravirt and fullvirt where the .cfg
    declares cmdline= as well as bogus extra= and (paravirt only) root=
    entries which should be ignored. Again these are format only tests
    since the inverse won't include the bogus lines.

The last two bullets here required splitting the DO_TEST macro into
two halves, as is done in the xmconfigtest.c case.

In order to introduce a use of VIR_WARN for logging I had to add
virerror.h and VIR_LOG_INIT.
Signed-off-by: NIan Campbell <ian.campbell@citrix.com>

Both xm and xl config have long supported specifying vif rate
limiting, e.g.

vif = [ 'mac=00:16:3E:74:3d:76,bridge=br0,rate=10MB/s' ]

Add support for mapping rate to and from <bandwidth> in the xenconfig
parser and formatter. rate is mapped to the required 'average' attribute
of the <outbound> element, e.g.

  <interface type='bridge'>
    ...
    <bandwidth>
      <outbound average='10240'/>
    </bandwidth>
  </interface>

Also add a unit test to check the conversion logic.
Signed-off-by: NJim Fehlig <jfehlig@suse.com>

From: Ian Campbell <ian.campbell@citrix.com>

xend prior to 4.0 understands vcpus as maxvcpus and vcpu_avail
as a bit map of which cpus are online (default is all).

xend from 4.0 onwards understands maxvcpus as maxvcpus and
vcpus as the number which are online (from 0..N-1). The
upstream commit (68a94cf528e6 "xm: Add maxvcpus support")
claims that if maxvcpus is omitted then the old behaviour
(i.e. obeying vcpu_avail) is retained, but AFAICT it was not,
in this case vcpu==maxcpus==online cpus. This is good for us
because handling anything else would be fiddly.

This patch changes parsing of the virDomainDef maxvcpus and vcpus
entries to use the corresponding 'maxvcpus' and 'vcpus' settings
from xm and xl config. It also drops use of the old Xen 3.x
'vcpu_avail' setting.

The change also removes the maxvcpus limit of MAX_VIRT_VCPUS (since
maxvcpus is simply a count, not a bit mask), which is particularly
crucial on ARM where MAX_VIRT_CPUS == 1 (since all guests are
expected to support vcpu placement, and therefore only the boot
vcpu's info lives in the shared info page).

Existing tests adjusted accordingly, and new tests added for the
'maxvcpus' setting.

Remove use of xendConfigVersion in the xm and xl config formatter/parsers
in src/xenconfig/. Adjust callers in the xen and libxl drivers accordingly.
Signed-off-by: NJim Fehlig <jfehlig@suse.com>

Change all tests to use the latest XEND_CONFIG_VERSION
(XEND_CONFIG_VERSION_3_1_0 = 4). Fix tests that do not conform to
the latest version.
Signed-off-by: NJim Fehlig <jfehlig@suse.com>

This change ensures to call driver specific post-parse code to modify
domain definition after parsing hypervisor config the same way we do
after parsing XML.
Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

From xl.cfg950 man page:

spiceagent_mouse=BOOLEAN
Whether SPICE agent is used for client mouse mode. The default is
true (1) (turn on)

spicevdagent=BOOLEAN
Enables spice vdagent. The Spice vdagent is an optional component for
enhancing user experience and performing guest-oriented management
tasks. Its features includes: client mouse mode (no need to grab
mouse by client, no mouse lag), automatic adjustment of screen
resolution, copy and paste (text and image) between client and domU.
It also requires vdagent service installed on domU o.s. to work.
The default is 0.

spice_clipboard_sharing=BOOLEAN
Enables Spice clipboard sharing (copy/paste). It requires spicevdagent
enabled. The default is false (0).

So if spiceagent_mouse is enabled (client mouse mode) or
spice_clipboard_sharing is enabled, spicevdagent must be enabled.
Along with this change, s/spicedvagent/spicevdagent, set
spiceagent_mouse correctly, and add a test for these spice
features.
Signed-off-by: NJim Fehlig <jfehlig@suse.com>

Replaces a common pattern used in many test files

This needs to specified in way too many places for a simple validation
check. The ostype/arch/virttype validation checks later in
DomainDefParseXML should catch most of the cases that this was covering.

Add support for HVM direct kernel boot in libxl.  Also add a
test to verify domXML <-> native conversions.
Signed-off-by: NChunyan Liu <cyliu@suse.com>
Signed-off-by: NJim Fehlig <jfehlig@suse.com>

Commit cd5dc303 added this test, but it fails if
LIBXL_HAVE_BUILDINFO_USBDEVICE_LIST is not defined:

6) Xen XM-2-XML Format fullvirt-multiusb
... libvirt:  error : unsupported configuration: multiple USB
devices not supported
FAILED

Signed-off-by: NMarek Marczykowski-Górecki <marmarek@invisiblethingslab.com>

When libvirt is configured --without-xen, building the xlconfigtest
fails with

  CCLD   xlconfigtest
  /usr/lib/gcc/x86_64-linux-gnu/4.7/../../../x86_64-linux-gnu/crt1.o
  In function `_start': (.text+0x20): undefined reference to `main'
  collect2: error: ld returned 1 exit status

Introduced in commit 4ed5fb91 by too much copy and paste from
xmconfigtest.

Add disk and spice config tests for the xen_xl config parser
Signed-off-by: NKiarie Kahurani <davidkiarie4@gmail.com>
Signed-off-by: NJim Fehlig <jfehlig@suse.com>

The virDomainDefParse* and virDomainDefFormat* methods both
accept the VIR_DOMAIN_XML_* flags defined in the public API,
along with a set of other VIR_DOMAIN_XML_INTERNAL_* flags
defined in domain_conf.c.

This is seriously confusing & error prone for a number of
reasons:

 - VIR_DOMAIN_XML_SECURE, VIR_DOMAIN_XML_MIGRATABLE and
   VIR_DOMAIN_XML_UPDATE_CPU are only relevant for the
   formatting operation
 - Some of the VIR_DOMAIN_XML_INTERNAL_* flags only apply
   to parse or to format, but not both.

This patch cleanly separates out the flags. There are two
distint VIR_DOMAIN_DEF_PARSE_* and VIR_DOMAIN_DEF_FORMAT_*
flags that are used by the corresponding methods. The
VIR_DOMAIN_XML_* flags received via public API calls must
be converted to the VIR_DOMAIN_DEF_FORMAT_* flags where
needed.

The various calls to virDomainDefParse which hardcoded the
use of the VIR_DOMAIN_XML_INACTIVE flag change to use the
VIR_DOMAIN_DEF_PARSE_INACTIVE flag.

Add tests to testing HVM default features (pae, acpi, apic)
conversion from xm config to libvirt xml. If no pae|acpi|apic
specified in xm config, after conversion, libvirt xml should
by default include:
 <features>
   <pae/>
   <apic/>
   <acpi/>
 </features>
Signed-off-by: NChunyan Liu <cyliu@suse.com>

src/xenxs contains parsing/formating functions for the various xen
config formats, and is better named src/xenconfig.
Signed-off-by: NJim Fehlig <jfehlig@suse.com>

Commit a1cbe4b5 added a check for spaces around assignments and this
patch extends it to checks for spaces around '=='.  One exception is
virAssertCmpInt where comma after '==' is acceptable (since it is a
macro and '==' is its argument).
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

Any test suite which involves a virDomainDefPtr should
call virDomainDefCheckABIStability with itself just as
a basic sanity check that the identity-comparison always
succeeds. This would have caught the recent NULL pointer
access crash.

Make sure we cope with def->name being NULL since the
VMWare config parser produces NULL names.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

The test case average timing code has not been used by any test
case ever. Delete it to remove complexity.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Similarly to VIR_STRDUP, we want the OOM error to be reported in
VIR_ALLOC and friends.

The source code base needs to be adapted as well. Some files
include virutil.h just for the string related functions (here,
the include is substituted to match the new file), some include
virutil.h without any need (here, the include is removed), and
some require both.

This patch refactors various places to allow removing of the
defaultConsoleTargetType callback from the virCaps structure.

A new console character device target type is introduced -
VIR_DOMAIN_CHR_CONSOLE_TARGET_TYPE_NONE - to mark that no type was
specified in the XML. This type is at the end converted to the standard
VIR_DOMAIN_CHR_CONSOLE_TARGET_TYPE_SERIAL. Other types that are
different from this default have to be processed separately in the
device post parse callback.

Move the xmlopt and caps arguments to the end of the argument list.