Instead of first listing the models on their own, and then
listing them again grouped by the libvirt release they were
introduced in, have a single list.
Signed-off-by: NAndrea Bolognani <abologna@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

s/netork/network/
Signed-off-by: NJim Fehlig <jfehlig@suse.com>

When preparing for migration, the libxl driver creates a new TCP listen
socket for the incoming migration by calling virNetSocketNewListenTCP,
passing the destination host name. virNetSocketNewListenTCP calls
virSocketAddrParse to check if the host name is a wildcard address, in
which case it avoids adding the AI_ADDRCONFIG flag to the hints passed to
getaddrinfo. If the host name is not an IP address, virSocketAddrParse
reports an error

error : virSocketAddrParseInternal:121 : Cannot parse socket address
'myhost.example.com': Name or service not known

But virNetSocketNewListenTCP succeeds regardless and the overall migration
operation succeeds.

Introduce virSocketAddrParseAny and use it when simply testing if a host
name/addr is parsable.
Signed-off-by: NJim Fehlig <jfehlig@suse.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

Signed-off-by: NJim Fehlig <jfehlig@suse.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

https://bugzilla.redhat.com/show_bug.cgi?id=1557769

Problem with device mapper targets is that there can be several
other devices 'hidden' behind them. For instance, /dev/dm-1 can
consist of /dev/sda, /dev/sdb and /dev/sdc. Therefore, when
setting up devices CGroup and namespaces we have to take this
into account.

This bug was exposed after Linux kernel was fixed. Initially,
kernel used different functions for getting block device in
open() and ioctl(). While CGroup permissions were checked in the
former case, due to a bug in kernel they were not checked in the
latter case. This changed with the upstream commit of
519049afead4f7c3e6446028c41e99fde958cc04 (v4.16-rc5~11^2~4).
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

This helper fetches dependencies for given device mapper target.

At the same time, we need to provide a dummy log function because
by default libdevmapper prints out error messages to stderr which
we need to suppress.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

We store all JSON numbers as strings. To allow using json libraries
that store them in numeric types, use a more predictable and normalized
value.
Signed-off-by: NJán Tomko <jtomko@redhat.com>

Rather than using virDomainObjListFindByID, let's be more consistent
and return a reffed and locked object. Since we're using the Ref API,
use virDomainObjEndAPI on @dom and not just virObjectUnlock.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>
Reviewed-by: NMarc Hartmayer <mhartmay@linux.vnet.ibm.com>

Rather than using virDomainObjListFindByUUID, let's be more consistent
and return a reffed and locked object. Since we're using the Ref API,
use virDomainObjEndAPI on @dom and not just virObjectUnlock.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>
Reviewed-by: NMarc Hartmayer <mhartmay@linux.vnet.ibm.com>

For all @dom's fetched from a testDomObjFromDomain because
virDomainObjListRemove will return an unlocked domain object
we should relock it prior to the cleanup label which will use
virDomainObjEndAPI which would Unlock and Unref the passed
object (and we should avoid unlocking an unlocked object).
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>
Reviewed-by: NMarc Hartmayer <mhartmay@linux.vnet.ibm.com>

Similarly to 3506f1ec, the contents of 'cmpcontent' may be an empty
string so the following code would access memory out of the array.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>

Since RPC support moved out of glibc we need to have explicit deps on
the new packages providing this functionality
Reviewed-by: NAndrea Bolognani <abologna@redhat.com>
Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>

The qemu command line generator code set disk caching of shareable disks
to 'none' when formatting the command line silently. Move this code to a
common place when preparing the domain definition for startup so that it
does not have to be duplicated.

The new test case shows that the actual cache mode will now be recorded
in the live XML definition.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>

Add a new kind of XML output test for the files in qemuxml2argvtest
where we can validate setup and defaults applied when starting up the
VM.

This is achieved by formatting of the definition processed by the
qemuxml2argvtest into a XML and it's compared against files in
qemuxml2startupxmloutdata. This test is automatically executed if the
output file is present and it's skipped otherwise.

The first example test case is created from 'disk-drive-shared' test
case.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>

Signed-off-by: NPeter Krempa <pkrempa@redhat.com>

The old qcow2 encryption format was buggy, so the new approach is to use
luks inside qcow2. As it turns out, it didn't require that many changes.

It was necessary to fix the command line formatter to stop mangling the
format when secrets are present and specify the encryption format and
secret in correct format.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>

Reject configurations when qemu would not support the image.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>

Signed-off-by: NPeter Krempa <pkrempa@redhat.com>

This format is used by the storage driver and other hypervisors but qemu
does not have notion of the 'iso' format and libvirt does not translate
it to anything useful, so it would not work anyways. Users should use
'raw' instead.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>

This is a storage driver type, which is not handled in qemu driver
properly. For accessing directories, disk type 'dir' is used instead.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>

QEMU does not support it so save us the hassle and forbid it right away.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>

It will be necessary to initialize various aspects for the detected
members of the backing chain. Add a function that will handle it and
call it from qemuDomainPrepareDiskSource and qemuDomainDetermineDiskChain
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>

For some reason we've decided to silently translate the disk
detect_zeroes mode if it would be invalid. Extract the
logic so that it does not need to be copypasta'd across the code base.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>

In some use cases (mostly in tests) it is not required to check the
seclabel definition validity. Add possibility to call
virDomainDiskDefParse without the domain definition.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>

Make the function more usable by returning the full disk definition and
fix the only caller for the new semantics. The new name for the function
is virDomainDiskDefParse.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>

The function docs state that 'strcontent' may be NULL. This was added in
8b3a0b28 but that commit neglected to fix rest of the function.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>

My commit 2e0d6cde claimed qemuMonitorJSONCheckError guarantees
"return" object exists in the JSON reply. But it only makes sure the key
is there, while the type of the value is not checked. A lot of callers
do not care since they only want to see whether their QMP command failed
or not, but any caller which needs to read some data from the reply
wants to make sure the correct data type was returned.

This patch adds a new API called qemuMonitorJSONCheckReply which calls
qemuMonitorJSONCheckError and checks "return" contains a value of the
specified type.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

Enforce usage of accessors by hiding the implementation in the code.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>

Rather than trying to prevent stealing of the 'actions' virJSONValue
into the monitor command replace the code so that it does the same
thing, since 'actions' was actually not really used after calling the
monitor.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>

Use the accessors instead.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>

Sometimes it's desired to get a JSON number as string. Add a helper.
This will help in cases where we'd want to convert the internal type from
string to something else.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>

Signed-off-by: NPeter Krempa <pkrempa@redhat.com>

Use virJSONValueObjectGetArray instead of virJSONValueObjectGet so that
it's not necessary to check whether it's an array.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>

Replace direct access to virJSONValue members by accessor.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>

Make sure that the 'a' and 'A' modifiers for virJSONValueObjectAddVArgs
behave correctly.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>

It was not possible to determine whether virJSONValueObjectAddVArgs and
the functions using it would consume a virJSONValue or not when used
with the 'a' or 'A' modifier depending on when the loop failed.

Fix this by passing in a pointer to the pointer so that it can be
cleared once it's successfully consumed and the callers don't have to
second-guess leaving a chance of leaking or double freeing the value
depending on the ordering.

Fix all callers to pass a double pointer too.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>

Signed-off-by: NRadostin Stoyanov <rstoyanov1@gmail.com>

Signed-off-by: NErik Skultety <eskultet@redhat.com>

Mediated devices support hot-{plug,unplug} since their introduction in
kernel 4.10, however libvirt has still been missing support for this.
Signed-off-by: NErik Skultety <eskultet@redhat.com>