Change bbe97ae9 caused the
QEMU driver to ignore ENOENT errors from cgroups, in order
to cope with missing /proc/cgroups. This is not good though
because many other things can cause ENOENT and should not
be ignored. The callers expect to see ENXIO when cgroups
are not present, so adjust the code to report that errno
when /proc/cgroups is missing
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

This reverts commit 940c6f10.

libxl expects the event handler to free the event passed to it.  From
libxl_event.h:

   event becomes owned by the application and must be freed, either
   by event_occurs or later

Xen 4.3 fixes a mistake in the libxl event handler signature where the
event owned by the application was defined as const.  Detect this and
define the libvirt libxl event handler signature appropriately.

We don't parse it anyway.

https://bugzilla.redhat.com/show_bug.cgi?id=893273

Make target path mandatory for pool types that require target,
since we refuse to parse a target without a path.

https://bugzilla.redhat.com/show_bug.cgi?id=893273

QEMU might support more values for "-drive discard", so using Bi-state
values (on/off) for it doesn't make sense.

"on" maps to "unmap", "off" maps to "ignore":

<...>
@var{discard} is one of "ignore" (or "off") or "unmap" (or "on") and
controls whether @dfn{discard} (also known as @dfn{trim} or @dfn{unmap})
requests are ignored or passed to the filesystem.  Some machine types
may not support discard requests.
</...>

The following XML configuration can be used to request all domain's
memory pages to be kept locked in host's memory (i.e., domain's memory
pages will not be swapped out):

      <memoryBacking>
        <locked/>
      </memoryBacking>

Commit ba5f3c7c moved vbox driver into libvirtd but forgot to adapt
daemon's Makefile.am.

Commit 632f78ca introduced a regression which causes schedinfo being
unable to set some parameters.  When migrating to priv->cgroup there
was missing variable left out and due to passed NULL to underlying
function, the setting failed.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=963592

Just like what previous patches do, it refactors qemuSetUnprivSGIO
to take the virDomainDeviceDefPtr as argument instead.

unpriv_sgio setting is tight with the shared device helpers, let's
put them together in qemu_conf.c

"sgio" is only valid for scsi host device.

SCSI host device will also support "sgio", and perhaps we could
use "sgio" in other places too in future, renaming the enum to
reuse.

This adds the shared device entry when starting domain (more
exactly, when preparing host devices), and remove the entry
when destroying domain (when reattaching host devices).

This changes the helpers qemu{Add,Remove}SharedDisk into
qemu{Add,Remove}SharedDevice, as most of the code in the helpers
can be reused for scsi host device.

To track the shared scsi host device, first it finds out the
device path (e.g. /dev/s[dr]*) which is mapped to the sg device,
and use device ID of the found device path (/dev/s[dr]*) as the
hash key. This is because of the device ID is not unique between
between /dev/s[dr]* and /dev/sg*, e.g.

% sg_map
/dev/sg0  /dev/sda
/dev/sg1  /dev/sr0

% ls -l /dev/sda
brw-rw----. 1 root disk 8, 0 May  2 19:26 /dev/sda

%ls -l /dev/sg0
crw-rw----. 1 root disk 21, 0 May  2 19:26 /dev/sg0

E.g.

% sg_map
/dev/sg0  /dev/sda
/dev/sg1  /dev/sr0

What the helper gets for /dev/sg0 is /dev/sda, it will be used by
later patch.

"Shared disk" is not only the thing we should care about after "scsi
hostdev" is introduced. A same scsi device can be used as "disk" for
one domain, and as "scsi hostdev" for another domain at the same time.
That's why this patch renames qemu_driver->sharedDisks. Related functions
and structs are also renamed.

Unlike disk device, the scsi-generic always writethrough the data,
so no need to introduce a "cache" tag, and set "cache=off".

Before trying to mount the selinux filesystem in a container
use is_selinux_enabled() to check if the machine actually
has selinux support (eg not booted with selinux=0)
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Change the build process & driver initialization so that the
VirtualBox driver is built into libvirtd, instead of libvirt.so
This change avoids the VirtualBox GPLv2-only license causing
compatibility problems with libvirt.so which is under the
GPLv2-or-later license.

NB this change prevents use of the VirtualBox driver on the
Windows platform, until such time as libvirtd can be made
to work there.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

During startup, the LXC driver uses paths such as

  /.oldroot/var/run/libvirt/lxc/...

to access directories from the previous root filesystem
after doing a pivot_root(). Unfortunately if /var/run
is an absolute symlink to /run, instead of a relative
symlink to ../run, these paths break.

At least one Linux distro is known to use an absolute
symlink for /var/run, so workaround this, by resolving
all symlinks before doing the pivot_root().
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

The reason for it's not exposed for such long time is that the
enums for VirtioEventIdx and CopyOnReadType have same enum values
and Correspondingstrings. This fixes the bug and adds test.

CVE-2013-1962

remoteDispatchStoragePoolListAllVolumes wasn't freeing the pool.
The pool also held a reference to the connection, preventing it from
getting freed and closing the netcf interface driver, which held two
sockets open.

Commit 7f15ebc7 introduced a bug
happening when guests without a <graphics> element are migrated.
The initialization of listenAddress happens unconditionally
from the cookie even if the cookie->graphics pointer was NULL.
Moved the initialization to where it is safe.
Signed-off-by: NViktor Mihajlovski <mihajlov@linux.vnet.ibm.com>

DRIVER_SOURCE_FILES mixes files with absolute path (inherited from
REMOTE_DRIVER_GENERATED) with file paths that are relative to srcdir but
check-driverimpls.pl needs full paths.

stdlib.h header file needed for getenv was only transitively included
through libdevmapper.h.

Update the LXC driver documentation to describe the way
containers are setup by default. Also describe the common
virsh commands for managing containers and a little about
the security. Placeholders for docs about configuring
containers still to be filled in.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Add spaces around "<<", and remove the useless blank-line.

The surest way to avoid regressions is to test documented behavior :)

* tests/virstringtest.c (testStrdup): New test case.
Signed-off-by: NEric Blake <eblake@redhat.com>

Use virMacAddrParse() to distinguish interface name from interface
mac address.

Linux netfilter at some point (Linux 2.6.39) inverted the meaning of the
'--ctdir reply' and newer netfilter implementations now expect
'--ctdir original' instead and vice-versa.
We check for the kernel version and assume that all Linux kernels with version
2.6.39 have the newer inverted logic.

Any distro backporting the Linux kernel patch that inverts the --ctdir logic
(Linux commit 96120d86f) must also backport this patch for Linux and
adapt the kernel version being tested for.
Signed-off-by: NStefan Berger <stefanb@linux.vnet.ibm.com>

FreeBSD ships an old gcc 4.2.1 which generates
bogus code, e.g. getsockopt() call returns
struct xucred with bogus values, which doesn't even
allow to connect to libvirtd:

error: Failed to find group record for gid '1284660778': No error: 0

So roll back to just -fstack-protector on FreeBSD.

If the <sysinfo> system table 'uuid' field is improperly formatted,
then qemu will fail to start the guest with the error:

virsh start dom
error: Failed to start domain dom
error: internal error process exited while connecting to monitor: Invalid SMBIOS UUID string

This was because the parsing rules were lax with respect to allowing extraneous
spaces and dashes in the provided UUID.  As long as there were 32 hexavalues
that matched the UUID for the domain the string was accepted. However startup
failed because the string format wasn't correct. This patch will adjust the
string format so that when it's presented to the driver it's in the expected
format.

Added a test for uuid comparison within sysinfo.

Add incorrectly formatted bios_date validation test

We do not want to allow contained applications to be able to read fusefs_t.
So we want /proc/meminfo label to match the system default proc_t.

Fix checking of error codes