1. 10 2月, 2016 1 次提交
    • C
      tests: qemuxml2xml: assign device addresses · c1c4d0d5
      Cole Robinson 提交于
      We use the PreFormat callback for this. Many test cases need to be extended
      to pass in proper qemuCaps flags so AssignAddresses doesn't throw errors.
      
      One test case (pcie-root-port-too-many) is dropped, since it was meant
      only for checking an error condition in qemuxml2argv, and one we add in
      AssignAddresses it errors here too.
      
      Long term I think AssignAddresses should be handled in qemu's PostParse
      callback, but that's not entirely straightforward. Handling it here
      means we can get the test suite churn over with.
      c1c4d0d5
  2. 09 2月, 2016 1 次提交
    • C
      tests: qemuxml2xml: Always use different output file · d093d623
      Cole Robinson 提交于
      Most qemuxml2xml tests expect that the input XML is unchanged after
      parsing. This is unlike 99% of new qemu configs in the wild, which after
      initial parsing end up with stable PCI device addresses. The xml2xml bit
      doesn't currently hit that code path though, so most XML testing indeed
      does not change.
      
      Future patches will add that PCI address bits, which means most test cases
      will have different output. So let's do away with the hardcoded same vs
      different test split, and always track a separate output file. Tests can
      still have same input and output, it just necessitates 2 separate XML files.
      d093d623
  3. 27 1月, 2016 1 次提交
    • P
      device: cleanup input device code · 36785c7e
      Pavel Hrdina 提交于
      The current code was a little bit odd.  At first we've removed all
      possible implicit input devices from domain definition to add them later
      back if there was any graphics device defined while parsing XML
      description.  That's not all, while formating domain definition to XML
      description we at first ignore any input devices with bus different to
      USB and VIRTIO and few lines later we add implicit input devices to XML.
      
      This seems to me as a lot of code for nothing.  This patch may look
      to be more complicated than original approach, but this is a preferred
      way to modify/add driver specific stuff only in those drivers and not
      deal with them in common parsing/formating functions.
      
      The update is to add those implicit input devices into config XML to
      follow the real HW configuration visible by guest OS.
      
      There was also inconsistence between our behavior and QEMU's in the way,
      that in QEMU there is no way how to disable those implicit input devices
      for x86 architecture and they are available always, even without graphics
      device.  This applies also to XEN hypervisor.  VZ driver already does its
      part by putting correct implicit devices into live XML.
      Signed-off-by: NPavel Hrdina <phrdina@redhat.com>
      36785c7e
  4. 25 4月, 2013 1 次提交
    • J
      qemu: auto-add pci-root controller for pc machine types · b33eb0dc
      Ján Tomko 提交于
      <controller type='pci' index='0' model='pci-root'/>
      is auto-added to pc* machine types.
      Without this controller PCI bus 0 is not available and
      no PCI addresses are assigned by default.
      
      Since older libvirt supported PCI bus 0 even without
      this controller, it is removed from the XML when migrating.
      b33eb0dc
  5. 09 5月, 2012 1 次提交
    • O
      numad: Always output 'placement' of <vcpu> · d70f2e11
      Osier Yang 提交于
      <vcpu> is not an optional node. The value for its 'placement'
      actually always defaults to 'static' in the underlying codes.
      (Even no 'cpuset' and 'placement' is specified, the domain
      process will be pinned to all the available pCPUs).
      d70f2e11
  6. 08 3月, 2012 1 次提交
    • E
      xml: output memory unit for clarity · 26545784
      Eric Blake 提交于
      Make it obvious to 'dumpxml' readers what unit we are using,
      since our default of KiB for memory (1024) differs from qemu's
      default of MiB; and differs from our use of bytes for storage.
      
      Tests were updated via:
      
      $ find tests/*data tests/*out -name '*.xml' | \
        xargs sed -i 's/<\(memory\|currentMemory\|hard_limit\|soft_limit\|min_guarantee\|swap_hard_limit\)>/<\1 unit='"'KiB'>/"
      $ find tests/*data tests/*out -name '*.xml' | \
        xargs sed -i 's/<\(capacity\|allocation\|available\)>/<\1 unit='"'bytes'>/"
      
      followed by a few fixes for the stragglers.
      
      Note that with this patch, the RNG for <memory> still forbids
      validation of anything except unit='KiB', since the code silently
      ignores the attribute; a later patch will expand <memory> to allow
      scaled input in the code and update the RNG to match.
      
      * docs/schemas/basictypes.rng (unit): Add 'bytes'.
      (scaledInteger): New define.
      * docs/schemas/storagevol.rng (sizing): Use it.
      * docs/schemas/storagepool.rng (sizing): Likewise.
      * docs/schemas/domaincommon.rng (memoryKBElement): New define; use
      for memory elements.
      * src/conf/storage_conf.c (virStoragePoolDefFormat)
      (virStorageVolDefFormat): Likewise.
      * src/conf/domain_conf.h (_virDomainDef): Document unit used
      internally.
      * src/conf/storage_conf.h (_virStoragePoolDef, _virStorageVolDef):
      Likewise.
      * tests/*data/*.xml: Update all tests.
      * tests/*out/*.xml: Likewise.
      * tests/define-dev-segfault: Likewise.
      * tests/openvzutilstest.c (testReadNetworkConf): Likewise.
      * tests/qemuargv2xmltest.c (blankProblemElements): Likewise.
      26545784
  7. 28 2月, 2012 1 次提交
    • O
      conf: Introduce new attribute for device address format · 4288b22f
      Osier Yang 提交于
      * src/conf/domain_conf.h: Add new member "target" to struct
        _virDomainDeviceDriveAddress.
      
      * src/conf/domain_conf.c: Parse and format "target"
      
      * Lots of tests (.xml) in tests/domainsnapshotxml2xmlout,
        tests/qemuxml2argvdata, tests/qemuxml2xmloutdata, and
        tests/vmx2xmldata/ are modified for newly introduced
        attribute "target" for address of "drive" type.
      4288b22f
  8. 10 2月, 2012 1 次提交
    • M
      domain: add implicit USB controller · 42043afc
      Marc-André Lureau 提交于
      Some tools, such as virt-manager, prefers having the default USB
      controller explicit in the XML document. This patch makes sure there
      is one. With this patch, it is now possible to switch from USB1 to
      USB2 from the release 0.9.1 of virt-manager.
      
      Fix tests to pass with this change.
      42043afc
  9. 31 1月, 2012 1 次提交
    • L
      conf: relocate rombar and boot order parse/format · c01ba1a4
      Laine Stump 提交于
      Since these two items are now in the virDomainDeviceInfo struct, it
      makes sense to parse/format them in the functions written to
      parse/format that structure. Not all types of devices allow them, so
      two internal flags are added to indicate when it is appropriate to do
      so.
      
      I was lucky - only one test case needed to be re-ordered!
      c01ba1a4
  10. 02 6月, 2011 1 次提交
    • J
      Fix order of disks and controllers · c1a98d88
      Jiri Denemark 提交于
      Commit 2d6adabd replaced qsorting disk
      and controller devices with inserting them at the right position. That
      was to fix unnecessary reordering of devices. However, when parsing
      domain XML devices are just taken in the order in which they appear in
      the XML since. Use the correct insertion algorithm to honor device
      target.
      c1a98d88
  11. 29 1月, 2011 1 次提交
    • M
      Add VIR_DIV_UP to divide memory or storage request sizes with round up · d9ad8ac3
      Matthias Bolte 提交于
      Use it in all places where a memory or storage request size is converted
      to a larger granularity. This avoids requesting too small memory or storage
      sizes that could result from the truncation done by a simple division.
      
      This extends the round up fix in 6002e040
      to the whole codebase.
      
      Instead of reporting errors for odd values in the VMX code round them up.
      
      Update the QEMU Argv tests accordingly as the original memory size 219200
      isn't a even multiple of 1024 and is rounded up to 215 megabyte now. Change
      it to 219100 and 219136. Use two different values intentionally to make
      sure that rounding up works.
      
      Update virsh.pod accordingly, as rounding down and rejecting are replaced
      by rounding up.
      d9ad8ac3
  12. 18 1月, 2011 1 次提交
  13. 10 12月, 2010 1 次提交
  14. 21 7月, 2010 1 次提交
    • D
      Explicitly represent balloon device in XML and handle PCI address · b2f18635
      Daniel P. Berrange 提交于
      To allow compatibility with older QEMU PCI device slot assignment
      it is necessary to explicitly track the balloon device in the
      XML. This introduces a new device
      
         <memballoon model='virtio|xen'/>
      
      It can also have a PCI address, auto-assigned if necessary.
      
      The memballoon will be automatically added to all Xen and QEMU
      guests by default.
      
      * docs/schemas/domain.rng: Add <memballoon> element
      * src/conf/domain_conf.c, src/conf/domain_conf.h: parsing
        and formatting for memballoon device. Always add a memory
        balloon device to Xen/QEMU if none exists in XML
      * src/libvirt_private.syms: Export memballoon model APIs
      * src/qemu/qemu_conf.c, src/qemu/qemu_conf.h: Honour the
        PCI device address in memory balloon device
      * tests/*: Update to test new functionality
      b2f18635
  15. 18 1月, 2010 1 次提交
    • D
      Auto-add disk controllers based on defined disks · b030084f
      Daniel P. Berrange 提交于
      Existing applications using libvirt are not aware of the disk
      controller concept. Thus, after parsing the <disk> definitions
      in the XML, it is neccessary to create <controller> elements
      to satisfy all requested disks, as per their defined drive
      addresses
      
      * src/conf/domain_conf.c, src/conf/domain_conf.h,
        src/libvirt_private.syms: Add virDomainDefAddDiskControllers()
        method for populating disk controllers, and call it after
        parsing disk definitions.
      * src/qemu/qemu_conf.c: Call virDomainDefAddDiskControllers()
        when doing ARGV -> XML conversion
      * tests/qemuxml2argvdata/qemuxml2argv*.xml: Add disk controller
        data to all data files which don't have it already
      b030084f
  16. 16 1月, 2010 1 次提交
    • D
      Set default disk controller/bus/unit props · 776e37e1
      Daniel P. Berrange 提交于
      When parsing the <disk> element specification, if no <address>
      is provided for the disk, then automatically assign one based on
      the <target dev='sdXX'/> device name. This provides for backwards
      compatability with existing applications using libvirt, while also
      allowing new apps to have complete fine grained control.
      
      * src/conf/domain_conf.h, src/conf/domain_conf.c,
        src/libvirt_private.syms: Add virDomainDiskDefAssignAddress()
        for assigning a controller/bus/unit address based on disk target
      * src/qemu/qemu_conf.c: Call virDomainDiskDefAssignAddress() after
        generating XML from ARGV
      * tests/qemuxml2argvdata/*.xml: Add in drive address information
        to all XML files
      776e37e1
  17. 03 3月, 2009 1 次提交
    • D
      adds a new <hostdev managed='(yes|no)'> property to host devices in domains · 09fb8845
      Daniel Veillard 提交于
      * docs/schemas/domain.rng src/domain_conf.c src/domain_conf.h
        src/qemu_conf.c
        tests/qemuxml2argvdata/qemuxml2argv-hostdev-pci-address.xml
        tests/qemuxml2argvdata/qemuxml2argv-hostdev-usb-address.xml
        tests/qemuxml2argvdata/qemuxml2argv-hostdev-usb-product.xml:
        adds a new <hostdev managed='(yes|no)'> property
        to host devices indicating whether or not we should
        automatically dettach/reset, patch by Mark McLoughlin
      daniel
      09fb8845
  18. 08 8月, 2008 1 次提交
    • D
      Extend parser and add support for USB devices in QEmu/KVM · d1710d35
      Daniel Veillard 提交于
      * src/domain_conf.c src/domain_conf.h src/qemu_conf.c
        src/qemu_driver.c: Patch from Guido Günther allowing to pass
        usb devices to qemu/kvm
      * docs/libvirt.rng: add the new functionality to the grammar
      * tests/qemuxml2argvdata/qemuxml2argv-hostdev-usb-address.args
        tests/qemuxml2argvdata/qemuxml2argv-hostdev-usb-address.xml
        tests/qemuxml2argvdata/qemuxml2argv-hostdev-usb-product.args
        tests/qemuxml2argvdata/qemuxml2argv-hostdev-usb-product.xml
        tests/qemuxml2argvtest.c tests/qemuxml2xmltest.c: adding examples
        to the regression tests
      * libvirt.spec.in: fix the licence tag
      Daniel
      d1710d35
  19. 10 5月, 2008 1 次提交
  20. 19 7月, 2007 1 次提交