Commit 2d6adabd replaced qsorting disk
and controller devices with inserting them at the right position. That
was to fix unnecessary reordering of devices. However, when parsing
domain XML devices are just taken in the order in which they appear in
the XML since. Use the correct insertion algorithm to honor device
target.

The test used an emulator that is not supported in testutilsqemu.c.
Switch from qemu-kvm to kvm to fix this.

This doesn't cover the getters that allow to query nparams yet.

New APIs have to use long long instead of long.

Also make apibuild errors fatal.

Remove some special case code that took care of mapping hyper to the
correct C types.

As the list of procedures that is allowed to map hyper to long is fixed
put it in the generator instead annotations in the .x files. This
results in simpler .x file parsing code.

Use macros for hyper to long assignments that perform overflow checks
when long is smaller than hyper. Map hyper to long long by default.

Suggested by Eric Blake.

The gnutls_certificate_type_set_priority method is deprecated.
Since we already set the default gnutls priority, and do not
support OpenGPG credentials in any case, it was not serving
any useful purpose and can be removed

* src/remote/remote_driver.c: Remove src/remote/remote_driver.c
  call

We commonly use "value, length" order, let's stick to this.

Convert openvzLocateConfFile to a replaceable function pointer to
allow testing the config file parsing without rewriting the whole
OpenVZ config parsing to a more testable structure.

Otherwise virsh dumpxml will report <domain type='qemu'> instead
of the expected <domain type='openvz'>.

Substitute VIR_ERR_NO_SUPPORT with VIR_ERR_INTERNAL_ERROR. Error
like following is not what user want to see.

error : pciDeviceIsAssignable:1487 : this function is not supported
by the connection driver: Device 0000:07:10.0 is behind a switch
lacking ACS and cannot be assigned

* daemon/THREADING.txt: Rename...
* daemon/THREADS.txt: ...to match qemu thread notes.
* daemon/Makefile.am (EXTRA_DIST): Reflect rename.

This function is also affected by getline conversion. But this
didn't result in a regression in general, because the difference
would only affect the behavior of the function when the line in
/proc/vz/vestat for the given vpsid wasn't found. Under normal
conditions this should not happen.

The regression fix in 3aab7f2d altered the error handling.
getline returns -1 on failure to read a line (including EOF). The
original openvzReadConfigParam function using openvz_readline only
treated EOF as not-found. The current getline version treats all
getline failures as not-found.

This patch fixes this and distinguishes EOF from other getline
failures.

Since directories can be used for <filesystem> passthrough, they are
basically storage volumes.

v2:
    Skip ., .., lost+found dirs

v3:
    Use gnulib last_component

v4:
    Use gnulib "dirname.h", not system <dirname.h>
    Don't skip lost+found

and check regression

This fixes this three warnings from the parser by allowing the parser
to ignore some macros in the same way as it can ignore functions.

Parsing ./../include/libvirt/libvirt.h
Misformatted macro comment for _virSchedParameter
 Expecting '* _virSchedParameter:' got '* virSchedParameter:'
Misformatted macro comment for _virBlkioParameter
 Expecting '* _virBlkioParameter:' got '* virBlkioParameter:'
Misformatted macro comment for _virMemoryParameter
 Expecting '* _virMemoryParameter:' got '* virMemoryParameter:'

If spice graphics has no <channel> elements, the output graphics XML
is messed up. To prevent this, we need to end the <graphics> element
just before adding any compression selecting elements.

The virSysinfoIsEqual method was mistakenly inside a #ifndef WIN32
conditional.

The existing virSysinfoFormat is also stubbed out on Win32, even
though the code works without any trouble. This breaks XML output
on Win32, so the stub is removed.

virsh migrate mistakenly had some variables inside the conditional

* src/util/sysinfo.c: Build virSysinfoIsEqual on Win32 and remove
  Win32 stub for virSysinfoFormat
* tools/virsh.c: Fix variable declaration on Win32

strchrnul() was called on the wrong string so it returned
the same result for each iteration.

In a parallel make, HTML validation tries to run before
hvsupport.html.in has been built.

* docs/Makefile.am: List hvsupport.html.in as a built source

Update the qemuDomainMigrateBegin method so that it accepts
an optional incoming XML document. This will be validated
for ABI compatibility against the current domain config,
and if this check passes, will be passed back out for use
by the qemuDomainMigratePrepare method on the target

* src/qemu/qemu_domain.c, src/qemu/qemu_domain.h,
  src/qemu/qemu_migration.c: Allow custom XML to be passed

Switch virsh migrate over to use virDomainMigrate2 and
virDomainMigrateToURI2. This is still compatible with
older libvirts, because these methods dynamically choose
whether to perform v1, v2 or v3 migration based on declared
RPC support from the libvirtd instances

Add a --xml arg which allows the user to pass in a custom
XML document. This XML document must be ABI compatible
with the current *live* XML document for the running guest
on the source host. ABI compatibility will be enforced by
any driver supporting this function

* tools/virsh.c: Add '--xml' arg to migrate command

To allow a client app to pass in custom XML during migration
of a guest it is neccessary to ensure the guest ABI remains
unchanged. The virDomainDefCheckABIStablity method accepts
two virDomainDefPtr structs and compares everything in them
that could impact the guest machine ABI

* src/conf/domain_conf.c, src/conf/domain_conf.h,
  src/libvirt_private.syms: Add virDomainDefCheckABIStablity
* src/conf/cpu_conf.c, src/conf/cpu_conf.h: Add virCPUDefIsEqual
* src/util/sysinfo.c, src/util/sysinfo.h: Add virSysinfoIsEqual

The virDomainHostdevDef struct contains a 'char *target'
field. This is set to 'NULL' when parsing XML and never
used / set anywhere else. Clearly it is bogus & unused

* src/conf/domain_conf.c, src/conf/domain_conf.h: Remove
  target from virDomainHostdevDef

This patch seperate the domain config loading just as qemu driver
does, first loading config of running or trasient domains, then
of persistent inactive domains. And only try to reconnect the
monitor of running domains, so that it won't always throws errors
saying can't connect to domain monitor.

And as "virDomainLoadConfig->virDomainAssignDef->virDomainObjAssignDef",
already do things like "vm->newDef = def", removed the codes
in "lxcReconnectVM" that does the same work.

Remove the Domain prefix from the comments.

As OpenVZ is Linux specific.

Add support to set the maximum memory of the domain.
Also add support to change the memory of the current
state of the domain, which translates to a running
domain or the config of the domain.

Based on the code from the qemu driver.

v3:
* initialize xml pointer to avoid segfault
* throw error message if domain is paused as
  libxenlight itself will pause it

v2:
* header is now padded and has a version field
* the correct restore function from libxl is used
* only create the restore event once in libxlVmStart

v2:
* incorporated Jim Fehlig's review

This patch fixes the population of the
libxenlight data structures. Now the devices
should be removed correctly from the xenstore
if they are detached.

Currently the QEMU monitor I/O handler code uses errno values
to report errors. This results in a sub-optimal error messages
on certain conditions, in particular when parsing JSON strings
malformed data simply results in 'EINVAL'.

This changes the code to use the standard libvirt error reporting
APIs. The virError is stored against the qemuMonitorPtr struct,
and when a monitor API is run, any existing stored error is copied
into that thread's error local

* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h,
  src/qemu/qemu_monitor_json.c, src/qemu/qemu_monitor_text.c: Use
  virError APIs for all monitor I/O handling code

Currently whenever there is any failure with parsing the monitor,
this is treated in the same was as end-of-file (ie QEMU quit).
The domain is terminated, if not already dead.

With this change, failures in parsing the monitor stream do not
result in the death of QEMU. The guest continues running unchanged,
but all further use of the monitor will be disabled.

The VMM_FAILURE event will be emitted, and the mgmt application
can decide when to kill/restart the guest to re-gain control

* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h: Run a
  different callback for monitor EOF vs error conditions.
* src/qemu/qemu_process.c: Emit VMM_FAILURE event when monitor
  fails

This introduces a new domain

  VIR_DOMAIN_EVENT_ID_CONTROL_ERROR

Which uses the existing generic callback

typedef void (*virConnectDomainEventGenericCallback)(virConnectPtr conn,
                                                     virDomainPtr dom,
                                                     void *opaque);

This event is intended to be emitted when there is a failure in
some part of the domain virtualization system. Whether the domain
continues to run/exist after the failure is an implementation
detail specific to the hypervisor.

The idea is that with some types of failure, hypervisors may
prefer to leave the domain running in a "degraded" mode of
operation. For example, if something goes wrong with the QEMU
monitor, it is possible to leave the guest OS running quite
happily. The mgmt app will simply loose the ability todo various
tasks. The mgmt app can then choose how/when to deal with the
failure that occured.
* daemon/remote.c: Dispatch of new event
* examples/domain-events/events-c/event-test.c: Demo catch
  of event
* include/libvirt/libvirt.h.in: Define event ID and callback
* src/conf/domain_event.c, src/conf/domain_event.h: Internal
  event handling
* src/remote/remote_driver.c: Receipt of new event from daemon
* src/remote/remote_protocol.x: Wire protocol for new event
* src/remote_protocol-structs: add new event for checks

Well, the remaining drivers that already had the get/set
scheduler parameter functionality to begin with.

For now, this blindly treats VIR_DOMAIN_SCHEDINFO_CURRENT as
the only supported operation for these 5 domains; it will
take domain-specific patches if more specific behavior is
preferred.

* src/esx/esx_driver.c (esxDomainGetSchedulerParameters)
(esxDomainSetSchedulerParameters): Move guts...
(esxDomainGetSchedulerParametersFlags)
(esxDomainSetSchedulerParametersFlags): ...to new functions.
* src/libxl/libxl_driver.c (libxlDomainGetSchedulerParameters)
(libxlDomainSetSchedulerParameters)
(libxlDomainGetSchedulerParametersFlags)
(libxlDomainSetSchedulerParametersFlags): Likewise.
* src/lxc/lxc_driver.c (lxcGetSchedulerParameters)
(lxcSetSchedulerParameters, lxcGetSchedulerParametersFlags)
(lxcSetSchedulerParametersFlags): Likewise.
* src/test/test_driver.c (testDomainGetSchedulerParams)
(testDomainSetSchedulerParams, testDomainGetSchedulerParamsFlags)
(testDomainSetSchedulerParamsFlags): Likewise.
* src/xen/xen_driver.c (xenUnifiedDomainGetSchedulerParameters)
(xenUnifiedDomainSetSchedulerParameters)
(xenUnifiedDomainGetSchedulerParametersFlags)
(xenUnifiedDomainSetSchedulerParametersFlags): Likewise.

Since we can now set just --live or --config, we also need to be
able to query that back.

In the case of setting both --live and --config, it shouldn't matter
which value we read back; otherwise, since querying treats the two
flags as mutually exclusive, so does this patch.

* tools/virsh.c (cmdSchedinfo): Use new API where appropriate.

* daemon/remote.c (remoteDispatchDomainGetSchedulerParameters):
New function.
* src/remote/remote_driver.c (remoteDomainGetSchedulerParameters):
Likewise.
* src/remote/remote_protocol.x
(remote_domain_get_scheduler_parameters_flags_args)
(remote_domain_get_scheduler_parameters_flags_ret): New types.
(remote_procedure): New RPC.
* src/remote_protocol-structs: Likewise.

* src/qemu/qemu_driver.c (qemuGetSchedulerParameters): Move
guts...
(qemuGetSchedulerParametersFlags): ...to new callback, and honor
flags more accurately.