The testcase is for testing non-fixed PCI address for primary
video device and using video args to -deivce qemu option.

'-device VGA' maps to '-vga std'
'-device cirrus-vga' maps to '-vga cirrus'
'-device qxl-vga' maps to '-vga qxl'
             (there is also '-device qxl' for secondary devices)
'-device vmware-svga' maps to '-vga vmware'

For qemu(>=1.2), we can use -device to replace -vga for video
device. For the primary video device, the patch tries to use 0x2
slot for matching old qemu. If the 0x2 slot is allocated already,
the addr property could help for using any available slot.
For qemu(< 1.2), we keep using -vga for primary device.

If there are multiple video devices
primary = 'yes' marks this video device as the primary one.
The rest are secondary video devices. No more than one could be
mark as primary. If none of them has primary attribute, the first
one will be the primary by default like what it was.
The reason of this changing is that for qemu, only one primary video
device is permitted which can be of any type. For secondary video
devices, only qxl is allowd. Primary attribute removes the restriction
that the first have to be the primary one.

We always put the primary video device into the first position of
video device structure array after parsing.

QEMU_CAPS_DEVICE_QXL          -device qxl
QEMU_CAPS_DEVICE_VGA          -device VGA
QEMU_CAPS_DEVICE_CIRRUS_VGA   -device cirrus-vga
QEMU_CAPS_DEVICE_VMWARE_SVGA  -device vmware-svga

QEMU_CAPS_DEVICE_VIDEO_PRIMARY  /* safe to use -device XXX
                                 for primary video device */

Fix a typo in qemuCapsObjectTypes, the string 'qxl' here
should be -device qxl rather than -vga [...|qxl|..]

- configure.ac docs/news.html.in: update for the release
- po/*.po: updated from transifex

Noticed these while building on FreeBSD.

* src/qemu/qemu_monitor.c (qemuMonitorBlockInfoLookup): Rename
variable to avoid 'devname' collision.
* src/qemu/qemu_driver.c (qemuDomainInterfaceStats): Mark unused
variable.

This adds an implementation of virNetSocketGetUNIXIdentity()
using LOCAL_PEERCRED socket option and xucred struct, defined
in <sys/ucred.h> on systems that have it.

A forgotten "!" in recently-modified code at the top of
networkRefreshDaemon() meant an improper early return, which led to 1)
dnsmasq config files not being updated from the newly modified config,
and 2) dnsmasq not being sent a SIGHUP so that it could learn about
the changes to the config.

virNetworkDefGetIpByIndex() returns NULL if there are no ip objects of
the requested type, and if there are no IP elements, then dnsmasq
shouldn't be running, so we can return early. Otherwise we should
rewrite the config files and send a SIGHUP.

since compilation breaks otherwise with older libsanlock.

As detected in https://bugzilla.redhat.com/show_bug.cgi?id=887187

* docs/formatdomain.html.in: Fix XML typos.

Currently, if sanlock is already registering a lockspace other
libvirtd instances (from other hosts) obtain -EINPROGRESS. On
sufficiently new sanlock, sanlock_inq_lockspace() is called,
which suspend execution until lockspace state is changed. With
current libvirt implementation, we fail to retry adding the
lockspace again but continue in error path. Therefore we produce
meaningless error message:

virLockManagerSanlockSetupLockspace:363 : Unable to add lockspace
/var/lib/libvirt/sanlock/__LIBVIRT__DISKS__: Success
qemudLoadDriverConfig:558 : Failed to load lock manager sanlock

We should try to re-add the lockspace after its state change to
be sure it was added successfully. In fact, with sufficiently new
sanlock we can just avoid dummy usleep() which is used if there's
no inquire API.

The virtlockd daemon scripts were lousy, when compared to their
counterparts in daemon/Makefile.am.  In particular, when init
scripts were selected, this resulted in 'make distcheck' failing
due to failure to clean up src/virtlockd.init.

* src/Makefile.am (install-systemd): Fix dependencies.  Use MKDIR_P.
(uninstall-systemd): Remove empty directory.  Use fewer processes.
(install-init, install-sysconfig): Use MKDIR_P.
(uninstall-init): Remove correct file, and also empty directory.
(uninstall-sysconfig): Remove empty directory.
(DISTCLEANFILES): Clean up trivially built sources.

For a unprivileged user libvirt.conf and auth.conf are looked up in
$XDG_CONFIG_HOME but the docs incorrectly state that it's $XDG_CONFIG_DIR.

When a network device's bridge connection is changed by
virDomainUpdateDevice, libvirt first removes the netdev's tap from its
old bridge, then adds it to the new bridge. Sometimes, due to a
network being destroyed while a guest device is still attached, the
tap may already be "removed" from the old bridge (or the old bridge
may not even exist any more); the existing code was needlessly failing
the update when this happened, making it impossible to recover from
the situation without completely detaching (i.e. removing) the netdev
from the guest and re-attaching.

Instead of failing the entire operation when removal of the tap from
the old bridge fails, this patch changes qemuDomainChangeNetBridge to
just log a warning and continue, allowing a reasonable recover from
the situation.

(you'll appreciate this change if you ever accidentally destroy a
network while your guests are still using it).

With sanlock enabled, only one of those files was installed.

* src/Makefile.am (libvirt.syms): Let cat loop for us.

In the case of an OOM error in virDomainDefGetSecurityLabelDef, secdef
is set to NULL, then dereferenced while printing the debug message.

This patch resolves the problem reported in:

   https://bugzilla.redhat.com/show_bug.cgi?id=886663

The source of the problem was the fix for CVE 2011-3411:

   https://bugzilla.redhat.com/show_bug.cgi?id=833033

which was originally committed upstream in commit
753ff83a. That commit improperly
removed the "--except-interface lo" from dnsmasq commandlines when
--bind-dynamic was used (based on comments in the latter bug).

It turns out that the problem reported in the CVE could be eliminated
without removing "--except-interface lo", and removing it actually
caused each instance of dnsmasq to listen on localhost on port 53,
which created a new problem:

If another instance of dnsmasq using "bind-interfaces" (instead of
"bind-dynamic") had already been started (or if another instance
started later used "bind-dynamic"), this wouldn't have any immediately
visible ill effects, but if you tried to start another dnsmasq
instance using "bind-interfaces" *after* starting any libvirt
networks, the new dnsmasq would fail to start, because there was
already another process listening on port 53.

(Subsequent to the CVE fix, another patch changed the network driver
to put dnsmasq options in a conf file rather than directly on the
dnsmasq commandline, but preserved the same options.)

This patch changes the network driver to *always* add
"except-interface=lo" to dnsmasq conf files, regardless of whether we use
bind-dynamic or bind-interfaces. This way no libvirt dnsmasq instances
are listening on localhost (and the CVE is still fixed).

The actual code change is miniscule, but must be propogated through all
of the test files as well.

$(srcdir) is already part of $$file since commit f1f9a7ac.

For non-default connections (specified by the environment variable or
the command line option) we call virConnectOpenAuth without registering
the vshCatchDisconnect callback.

This calls vshReconnect instead which takes care of it.

Since we (ab)use vshReconnect for the default URI connection, if it
fails it might print 'Failed to reconnect to the hypervisor' even if we
were never connected before.

This changes it to only mention reconnection on the first try after
getting disconnected.

The default lockd driver behavour is to acquire leases
directly on the disk files. This introduces an alternative
mode, where leases are acquire indirectly on a file that
is based on a SHA256 hash of the disk filename.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

This adds a 'lockd' lock driver which is just a client which
talks to the lockd daemon to perform all locking. This will
be the default lock driver for any hypervisor which needs one.

* src/Makefile.am: Add lockd.so plugin
* src/locking/lock_driver_lockd.c: Lockd driver impl
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

The virtlockd daemon maintains file locks on behalf of libvirtd
and any VMs it is running. These file locks must be held for as
long as any VM is running. If virtlockd itself ever quits, then
it is expected that a node would be fenced/rebooted. Thus to
allow for software upgrads on live systemd, virtlockd needs the
ability to re-exec() itself.

Upon receipt of SIGUSR1, virtlockd will save its current live
state out to a file /var/run/virtlockd-restart-exec.json
It then re-exec()'s itself with exactly the same argv as it
originally had, and loads the state file, reconstructing any
objects as appropriate.

The state file contains information about all locks held and
all network services and clients currently active. An example
state document is

 {
    "server": {
        "min_workers": 1,
        "max_workers": 20,
        "priority_workers": 0,
        "max_clients": 20,
        "keepaliveInterval": 4294967295,
        "keepaliveCount": 0,
        "keepaliveRequired": false,
        "services": [
            {
                "auth": 0,
                "readonly": false,
                "nrequests_client_max": 1,
                "socks": [
                    {
                        "fd": 6,
                        "errfd": -1,
                        "pid": 0,
                        "isClient": false
                    }
                ]
            }
        ],
        "clients": [
            {
                "auth": 0,
                "readonly": false,
                "nrequests_max": 1,
                "sock": {
                    "fd": 9,
                    "errfd": -1,
                    "pid": 0,
                    "isClient": true
                },
                "privateData": {
                    "restricted": true,
                    "ownerPid": 1722,
                    "ownerId": 6,
                    "ownerName": "f18x86_64",
                    "ownerUUID": "97586ba9-df27-9459-c806-f016c8bbd224"
                }
            },
            {
                "auth": 0,
                "readonly": false,
                "nrequests_max": 1,
                "sock": {
                    "fd": 10,
                    "errfd": -1,
                    "pid": 0,
                    "isClient": true
                },
                "privateData": {
                    "restricted": true,
                    "ownerPid": 1784,
                    "ownerId": 7,
                    "ownerName": "f16x86_64",
                    "ownerUUID": "7b8e5e42-b875-61e9-b981-91ad8fa46979"
                }
            }
        ]
    },
    "defaultLockspace": {
        "resources": [
            {
                "name": "/var/lib/libvirt/images/f16x86_64.raw",
                "path": "/var/lib/libvirt/images/f16x86_64.raw",
                "fd": 14,
                "lockHeld": true,
                "flags": 0,
                "owners": [
                    1784
                ]
            },
            {
                "name": "/var/lib/libvirt/images/shared.img",
                "path": "/var/lib/libvirt/images/shared.img",
                "fd": 12,
                "lockHeld": true,
                "flags": 1,
                "owners": [
                    1722,
                    1784
                ]
            },
            {
                "name": "/var/lib/libvirt/images/f18x86_64.img",
                "path": "/var/lib/libvirt/images/f18x86_64.img",
                "fd": 11,
                "lockHeld": true,
                "flags": 0,
                "owners": [
                    1722
                ]
            }
        ]
    },
    "lockspaces": [

    ],
    "magic": "30199"
 }
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

This enhancement virtlockd so that it can receive a pre-opened
UNIX domain socket from systemd at launch time, and adds the
systemd service/socket unit files

* daemon/libvirtd.service.in: Require virtlockd to be running
* libvirt.spec.in: Add virtlockd systemd files
* src/Makefile.am: Install systemd files
* src/locking/lock_daemon.c: Support socket activation
* src/locking/virtlockd.service.in, src/locking/virtlockd.socket.in:
  systemd unit files
* src/rpc/virnetserverservice.c, src/rpc/virnetserverservice.h:
  Add virNetServerServiceNewFD() method
* src/rpc/virnetsocket.c, src/rpc/virnetsocket.h: Add virNetSocketNewListenFD
  method
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Introduce a lock_daemon_dispatch.c file which implements the
server side dispatcher the RPC APIs previously defined in the
lock protocol.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

The virtlockd daemon will be responsible for managing locks
on virtual machines. Communication will be via the standard
RPC infrastructure. This provides the XDR protocol definition

* src/locking/lock_protocol.x: Wire protocol for virtlockd
* src/Makefile.am: Include lock_protocol.[ch] in virtlockd
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

The virtlockd daemon will maintain locks on behalf of libvirtd.
There are two reasons for it to be separate

 - Avoid risk of other libvirtd threads accidentally
   releasing fcntl() locks by opening + closing a file
   that is locked
 - Ensure locks can be preserved across libvirtd restarts.
   virtlockd will need to be able to re-exec itself while
   maintaining locks. This is simpler to achieve if its
   sole job is maintaining locks
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Refactor virLockManagerPluginNew() so that the caller does
not need to pass in the config file path itself - just the
config directory and driver name.

Fix QEMU to actually pass in a config file when creating the
default lock manager plugin, rather than NULL.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

The current  virStorageFileGet{LVM,SCSI}Key methods return
the key as the return value. Unfortunately it is desirable
for "NULL" to be a valid return value, as well as an error
indicator. Thus the returned key must instead be provided
as an out-parameter.

When we invoke lvs or scsi_id to extract ID for block devices,
we don't want virCommandWait logging errors messages. Thus we
must explicitly check 'status != 0', rather than letting
virCommandWait do it.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

The libxl driver ignored boot devices in the domain config,
preventing PXE booting HVM domains.  This patch accounts for
user-specified boot devices when building the libxl domain
configuration.

The QED file format is non-versioned, so although the magic
value matched, libvirt rejected it due to lack of a version
number to compare against. We need to distinguish this case
by allowing a value of '-2' to indicate a non-versioned file
where only the magic is required to match
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

To help us detect when new storage file versions come into
existance log a warning if the storage file magic matches,
but the version does not
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>