The ACL check didn't check the VIR_DOMAIN_XML_SECURE flag and the
appropriate permission for it.

(cherry picked from commit 03c3c0c8)

Commit 28f8dfdc (v1.0.0) introduced a security hole: in at least
the qemu implementation of virDomainGetXMLDesc, the use of the
flag VIR_DOMAIN_XML_MIGRATABLE (which is usable from a read-only
connection) triggers the implicit use of VIR_DOMAIN_XML_SECURE
prior to calling qemuDomainFormatXML.  However, the use of
VIR_DOMAIN_XML_SECURE is supposed to be restricted to read-write
clients only.  This patch treats the migratable flag as requiring
the same permissions, rather than analyzing what might break if
migratable xml no longer includes secret information.

Fortunately, the information leak is low-risk: all that is gated
by the VIR_DOMAIN_XML_SECURE flag is the VNC connection password;
but VNC passwords are already weak (FIPS forbids their use, and
on a non-FIPS machine, anyone stupid enough to trust a max-8-byte
password sent in plaintext over the network deserves what they
get).  SPICE offers better security than VNC, and all other
secrets are properly protected by use of virSecret associations
rather than direct output in domain XML.

* src/remote/remote_protocol.x (REMOTE_PROC_DOMAIN_GET_XML_DESC):
Tighten rules on use of migratable flag.
* src/libvirt-domain.c (virDomainGetXMLDesc): Likewise.
Signed-off-by: NEric Blake <eblake@redhat.com>
(cherry picked from commit b1674ad5)

Conflicts:
	src/libvirt-domain.c - file split from older src/libvirt.c
Signed-off-by: NEric Blake <eblake@redhat.com>

Implement the remote driver support for shuffling the domain stats
around.

The API should expose the information contained in virDomainCapsPtr.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Instead of maintaining two very similar APIs, add the "@mac" parameter
to virNetworkGetDHCPLeases and kill virNetworkGetDHCPLeasesForMAC. Both
of those functions would return data the same way, so making @mac an
optional filter simplifies a lot of stuff.

Variables/fields named 'interface' clash with system
header symbols on some platforms.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Implement RPC calls for virNetworkGetDHCPLeases, virNetworkGetDHCPLeasesForMAC

daemon/remote.c
   * Define remoteSerializeNetworkDHCPLeases,
            remoteDispatchNetworkGetDHCPLeases
   * Define remoteDispatchNetworkGetDHCPLeasesForMAC
   * Define helper function remoteSerializeDHCPLease

src/remote/remote_driver.c
   * Define remoteNetworkGetDHCPLeases
   * Define remoteNetworkGetDHCPLeasesForMAC
   * Define helper function remoteSerializeDHCPLease

src/remote/remote_protocol.x
   * New RPC procedure: REMOTE_PROC_NETWORK_GET_DHCP_LEASES
   * Define structs remote_network_dhcp_leases, remote_network_get_dhcp_leases_args,
                    remote_network_get_dhcp_leases_ret
   * New RPC procedure: REMOTE_PROC_NETWORK_GET_DHCP_LEASES_FOR_MAC
   * Define structs remote_network_dhcp_leases_for_mac, remote_network_get_dhcp_leases_for_mac_args,
                    remote_network_get_dhcp_leases_for_mac_ret

src/remote_protocol-structs
   * New structs added

src/rpc/gendispatch.pl
   * Add exception (s/Dhcp/DHCP) for auto-generating names of the remote functions
     in daemon/remote_dispatch.h

The aim of the API is to get information on number of free pages
on the system. The API behaves similar to the
virNodeGetCellsFreeMemory(). User passes starting NUMA cell, the
count of nodes that he's interested in, pages sizes (yes,
multiple sizes can be queried at once) and the counts are
returned in an array.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

When the block job event was first added, it was for block pull,
where the active layer of the disk remains the same name.  It was
also in a day where we only cared about local files, and so we
always had a canonical absolute file name.  But two things have
changed since then: we now have network disks, where determining
a single absolute string does not really make sense; and we have
two-phase jobs (copy and active commit) where the name of the
active layer changes between the first event (ready, on the old
name) and second (complete, on the pivoted name).

Adam Litke reported that having an unstable string between events
makes life harder for clients.  Furthermore, all of our API that
operate on a particular disk of a domain accept multiple strings:
not only the absolute name of the active layer, but also the
destination device name (such as 'vda').  As this latter name is
stable, even for network sources, it serves as a better string
to supply in block job events.

But backwards-compatibility demands that we should not change the
name handed to users unless they explicitly request it.  Therefore,
this patch adds a new event, BLOCK_JOB_2 (alas, I couldn't think of
any nicer name - but at least Migrate2 and Migrate3 are precedent
for a number suffix).  We must double up on emitting both old-style
and new-style events according to what clients have registered for
(see also how IOError and IOErrorReason emits double events, but
there the difference was a larger struct rather than changed
meaning of one of the struct members).

Unfortunately, adding a new event isn't something that can easily
be broken into pieces, so the commit is rather large.

* include/libvirt/libvirt.h.in (virDomainEventID): Add a new id
for VIR_DOMAIN_EVENT_ID_BLOCK_JOB_2.
(virConnectDomainEventBlockJobCallback): Document new semantics.
* src/conf/domain_event.c (_virDomainEventBlockJob): Rename field,
to ensure we catch all clients.
(virDomainEventBlockJobNew): Add parameter.
(virDomainEventBlockJobDispose)
(virDomainEventBlockJobNewFromObj)
(virDomainEventBlockJobNewFromDom)
(virDomainEventDispatchDefaultFunc): Adjust clients.
(virDomainEventBlockJob2NewFromObj)
(virDomainEventBlockJob2NewFromDom): New functions.
* src/conf/domain_event.h: Add new prototypes.
* src/libvirt_private.syms (domain_event.h): Export new functions.
* src/qemu/qemu_driver.c (qemuDomainBlockJobImpl): Generate two
different events.
* src/qemu/qemu_process.c (qemuProcessHandleBlockJob): Likewise.
* src/remote/remote_protocol.x
(remote_domain_event_block_job_2_msg): New struct.
(REMOTE_PROC_DOMAIN_EVENT_BLOCK_JOB_2): New RPC.
* src/remote/remote_driver.c
(remoteDomainBuildEventBlockJob2): New handler.
(remoteEvents): Register new event.
* daemon/remote.c (remoteRelayDomainEventBlockJob2): New handler.
(domainEventCallbacks): Register new event.
* tools/virsh-domain.c (vshEventCallbacks): Likewise.
(vshEventBlockJobPrint): Adjust client.
* src/remote_protocol-structs: Regenerate.
Signed-off-by: NEric Blake <eblake@redhat.com>

During guest migration, if the domain xml is bigger than 16384 which is
easily possible for a guest with good number of disks, message encode fails
for xdr_remote_domain_migrate_perform3_ret().
So, Increase the COOKIE_MAX to STRING_MAX value.
Signed-off-by: NShivaprasad G Bhat <shivaprasadbhat@gmail.com>

These APIs allow users to get or set time in a domain, which may come
handy if the domain has been resumed just recently and NTP is not
configured or hasn't kicked in yet and the guest is running
something time critical. In addition, NTP may refuse to re-set the clock
if the skew is too big.

In addition, new ACL attribute is introduced 'set_time'.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

New rules are added in fixup_name in gendispatch.pl to keep the name
FSFreeze and FSThaw. This adds a new ACL permission 'fs_freeze',
which is also applied to VIR_DOMAIN_SNAPSHOT_CREATE_QUIESCE flag.
Signed-off-by: NTomoki Sekiyama <tomoki.sekiyama@hds.com>
Acked-by: NDaniel P. Berrange <berrange@redhat.com>
Signed-off-by: NEric Blake <eblake@redhat.com>

--memory-only option is introduced without compression supported. Now qemu
has support for dumping domain's memory in kdump-compressed format. This
patch adds a new virDomainCoreDumpWithFormat API, so that the format in
which qemu dumps domain's memory can be specified.
Signed-off-by: NQiao Nuohan <qiaonuohan@cn.fujitsu.com>
Signed-off-by: NEric Blake <eblake@redhat.com>

Commit 57ddcc23 (v0.9.11) introduced the pmwakeup event, with
an optional 'reason' field reserved for possible future expansion.
But it failed to wire the field through RPC, so even if we do
add a reason in the future, we will be unable to get it back
to the user.

Worse, commit 7ba5defb (v1.0.0) repeated the same mistake with
the pmsuspend_disk event.

As long as we are adding new RPC calls, we might as well fix
the events to actually match the signature so that we don't have
to add yet another RPC in the future if we do decide to start
using the reason field.

* src/remote/remote_protocol.x
(remote_domain_event_callback_pmwakeup_msg)
(remote_domain_event_callback_pmsuspend_msg)
(remote_domain_event_callback_pmsuspend_disk_msg): Add reason
field.
* daemon/remote.c (remoteRelayDomainEventPMWakeup)
(remoteRelayDomainEventPMSuspend)
(remoteRelayDomainEventPMSuspendDisk): Pass reason to client.
* src/conf/domain_event.h (virDomainEventPMWakeupNewFromDom)
(virDomainEventPMSuspendNewFromDom)
(virDomainEventPMSuspendDiskNewFromDom): Require additional
parameter.
* src/conf/domain_event.c (virDomainEventPMClass): New class.
(virDomainEventPMDispose): New function.
(virDomainEventPMWakeupNew*, virDomainEventPMSuspendNew*)
(virDomainEventPMSuspendDiskNew*)
(virDomainEventDispatchDefaultFunc): Use new class.
* src/remote/remote_driver.c (remoteDomainBuildEvent*PM*): Pass
reason through.
* src/remote_protocol-structs: Regenerate.
Signed-off-by: NEric Blake <eblake@redhat.com>

Following the patterns established by lifecycle events, this
creates all the new RPC calls needed to pass callback IDs
for every domain event, and changes the limits in client and
server codes to use modern style when possible.

I've tested all combinations: both 'old client and new server'
and 'new client and old server' continue to work with the old
RPCs, and 'new client and new server' benefit from server-side
filtering with the new RPCs.

* src/remote/remote_protocol.x (REMOTE_PROC_DOMAIN_EVENT_*): Add
REMOTE_PROC_DOMAIN_EVENT_CALLBACK_* counterparts.
* daemon/remote.c (remoteRelayDomainEvent*): Send callbackID via
newer RPC when used with new-style registration.
(remoteDispatchConnectDomainEventCallbackRegisterAny): Extend to
cover all domain events.
* src/remote/remote_driver.c (remoteDomainBuildEvent*): Add new
Callback and Helper functions.
(remoteEvents): Match order of RPC numbers, register new handlers.
(remoteConnectDomainEventRegisterAny)
(remoteConnectDomainEventDeregisterAny): Extend to cover all
domain events.
* src/remote_protocol-structs: Regenerate.
Signed-off-by: NEric Blake <eblake@redhat.com>

This patch adds some new RPC call numbers, but for ease of review,
they sit idle until a later patch adds the client counterpart to
drive the new RPCs.  Also for ease of review, I limited this patch
to just the lifecycle event; although converting the remaining
15 domain events will be quite mechanical.  On the server side,
we have to have a function per RPC call, largely with duplicated
bodies (the key difference being that we store in our callback
opaque pointer whether events should be fired with old or new
style); meanwhile, a single function can drive multiple RPC
messages.  With a strategic choice of XDR struct layout, we can
make the event generation code for both styles fairly compact.

I debated about adding a tri-state witness variable per
connection (values 'unknown', 'legacy', 'modern').  It would start
as 'unknown', move to 'legacy' if any RPC call is made to a legacy
event call, and move to 'modern' if the feature probe is made;
then the event code could issue an error if the witness state is
incorrect (a legacy RPC call while in 'modern', a modern RPC call
while in 'unknown' or 'legacy', and a feature probe while in
'legacy' or 'modern').  But while it might prevent odd behavior
caused by protocol fuzzing, I don't see that it would prevent
any security holes, so I considered it bloat.

Note that sticking @acl markers on the new RPCs generates unused
functions in access/viraccessapicheck.c, because there is no new
API call that needs to use the new checks; however, having a
consistent .x file is worth the dead code.

* src/libvirt_internal.h (VIR_DRV_FEATURE_REMOTE_EVENT_CALLBACK):
New feature.
* src/remote/remote_protocol.x
(REMOTE_PROC_CONNECT_DOMAIN_EVENT_CALLBACK_REGISTER_ANY)
(REMOTE_PROC_CONNECT_DOMAIN_EVENT_CALLBACK_DEREGISTER_ANY)
(REMOTE_PROC_DOMAIN_EVENT_CALLBACK_LIFECYCLE): New RPCs.
* daemon/remote.c (daemonClientCallback): Add field.
(remoteDispatchConnectDomainEventCallbackRegisterAny)
(remoteDispatchConnectDomainEventCallbackDeregisterAny): New
functions.
(remoteDispatchConnectDomainEventRegisterAny)
(remoteDispatchConnectDomainEventDeregisterAny): Mark legacy use.
(remoteRelayDomainEventLifecycle): Change message based on legacy
or new use.
(remoteDispatchConnectSupportsFeature): Advertise new feature.
* src/remote_protocol-structs: Regenerate.
Signed-off-by: NEric Blake <eblake@redhat.com>

I noticed that we allow virDomainGetVcpusFlags even for read-only
connections, but that with a flag, it can require guest agent
interaction.  It is feasible that a malicious guest could
intentionally abuse the replies it sends over the guest agent
connection to possibly trigger a bug in libvirt's JSON parser,
or withhold an answer so as to prevent the use of the agent
in a later command such as a shutdown request.  Although we
don't know of any such exploits now (and therefore don't mind
posting this patch publicly without trying to get a CVE assigned),
it is better to err on the side of caution and explicitly require
full access to any domain where the API requires guest interaction
to operate correctly.

I audited all commands that are marked as conditionally using a
guest agent.  Note that at least virDomainFSTrim is documented
as needing a guest agent, but that such use is unconditional
depending on the hypervisor (so the existing domain:fs_trim ACL
should be sufficient there, rather than also requirng domain:write).
But when designing future APIs, such as the plans for obtaining
a domain's IP addresses, we should copy the approach of this patch
in making interaction with the guest be specified via a flag, and
use that flag to also require stricter access checks.

* src/libvirt.c (virDomainGetVcpusFlags): Forbid guest interaction
on read-only connection.
(virDomainShutdownFlags, virDomainReboot): Improve docs on agent
interaction.
* src/remote/remote_protocol.x
(REMOTE_PROC_DOMAIN_SNAPSHOT_CREATE_XML)
(REMOTE_PROC_DOMAIN_SET_VCPUS_FLAGS)
(REMOTE_PROC_DOMAIN_GET_VCPUS_FLAGS, REMOTE_PROC_DOMAIN_REBOOT)
(REMOTE_PROC_DOMAIN_SHUTDOWN_FLAGS): Require domain:write for any
conditional use of a guest agent.
* src/xen/xen_driver.c: Fix clients.
* src/libxl/libxl_driver.c: Likewise.
* src/uml/uml_driver.c: Likewise.
* src/qemu/qemu_driver.c: Likewise.
* src/lxc/lxc_driver.c: Likewise.
Signed-off-by: NEric Blake <eblake@redhat.com>

Ever since ACL filtering was added in commit 76397360 (v1.1.1), a
user could still use event registration to obtain access to a
domain that they could not normally access via virDomainLookup*
or virConnectListAllDomains and friends.  We already have the
framework in the RPC generator for creating the filter, and
previous cleanup patches got us to the point that we can now
wire the filter through the entire object event stack.

Furthermore, whether or not domain:getattr is honored, use of
global events is a form of obtaining a list of networks, which
is covered by connect:search_domains added in a93cd08f (v1.1.0).
Ideally, we'd have a way to enforce connect:search_domains when
doing global registrations while omitting that check on a
per-domain registration.  But this patch just unconditionally
requires connect:search_domains, even when no list could be
obtained, based on the following observations:
1. Administrators are unlikely to grant domain:getattr for one
or all domains while still denying connect:search_domains - a
user that is able to manage domains will want to be able to
manage them efficiently, but efficient management includes being
able to list the domains they can access.  The idea of denying
connect:search_domains while still granting access to individual
domains is therefore not adding any real security, but just
serves as a layer of obscurity to annoy the end user.
2. In the current implementation, domain events are filtered
on the client; the server has no idea if a domain filter was
requested, and must therefore assume that all domain event
requests are global.  Even if we fix the RPC protocol to
allow for server-side filtering for newer client/server combos,
making the connect:serach_domains ACL check conditional on
whether the domain argument was NULL won't benefit older clients.
Therefore, we choose to document that connect:search_domains
is a pre-requisite to any domain event management.

Network events need the same treatment, with the obvious
change of using connect:search_networks and network:getattr.

* src/access/viraccessperm.h
(VIR_ACCESS_PERM_CONNECT_SEARCH_DOMAINS)
(VIR_ACCESS_PERM_CONNECT_SEARCH_NETWORKS): Document additional
effect of the permission.
* src/conf/domain_event.h (virDomainEventStateRegister)
(virDomainEventStateRegisterID): Add new parameter.
* src/conf/network_event.h (virNetworkEventStateRegisterID):
Likewise.
* src/conf/object_event_private.h (virObjectEventStateRegisterID):
Likewise.
* src/conf/object_event.c (_virObjectEventCallback): Track a filter.
(virObjectEventDispatchMatchCallback): Use filter.
(virObjectEventCallbackListAddID): Register filter.
* src/conf/domain_event.c (virDomainEventFilter): New function.
(virDomainEventStateRegister, virDomainEventStateRegisterID):
Adjust callers.
* src/conf/network_event.c (virNetworkEventFilter): New function.
(virNetworkEventStateRegisterID): Adjust caller.
* src/remote/remote_protocol.x
(REMOTE_PROC_CONNECT_DOMAIN_EVENT_REGISTER)
(REMOTE_PROC_CONNECT_DOMAIN_EVENT_REGISTER_ANY)
(REMOTE_PROC_CONNECT_NETWORK_EVENT_REGISTER_ANY): Generate a
filter, and require connect:search_domains instead of weaker
connect:read.
* src/test/test_driver.c (testConnectDomainEventRegister)
(testConnectDomainEventRegisterAny)
(testConnectNetworkEventRegisterAny): Update callers.
* src/remote/remote_driver.c (remoteConnectDomainEventRegister)
(remoteConnectDomainEventRegisterAny): Likewise.
* src/xen/xen_driver.c (xenUnifiedConnectDomainEventRegister)
(xenUnifiedConnectDomainEventRegisterAny): Likewise.
* src/vbox/vbox_tmpl.c (vboxDomainGetXMLDesc): Likewise.
* src/libxl/libxl_driver.c (libxlConnectDomainEventRegister)
(libxlConnectDomainEventRegisterAny): Likewise.
* src/qemu/qemu_driver.c (qemuConnectDomainEventRegister)
(qemuConnectDomainEventRegisterAny): Likewise.
* src/uml/uml_driver.c (umlConnectDomainEventRegister)
(umlConnectDomainEventRegisterAny): Likewise.
* src/network/bridge_driver.c
(networkConnectNetworkEventRegisterAny): Likewise.
* src/lxc/lxc_driver.c (lxcConnectDomainEventRegister)
(lxcConnectDomainEventRegisterAny): Likewise.
Signed-off-by: NEric Blake <eblake@redhat.com>

We haven't had a release with network events yet, so we are free
to fix the RPC so that it actually does what we want.  Doing
client-side filtering of per-network events is inefficient if a
connection is only interested in events on a single network out
of hundreds available on the server.  But to do server-side
per-network filtering, the server needs to know which network
to filter on - so we need to pass an optional network over on
registration.  Furthermore, it is possible to have a client with
both a global and per-network filter; in the existing code, the
server sends only one event and the client replicates to both
callbacks.  But with server-side filtering, the server will send
the event twice, so we need a way for the client to know which
callbackID is sending an event, to ensure that the client can
filter out events from a registration that does not match the
callbackID from the server.  Likewise, the existing style of
deregistering by eventID alone is fine; but in the new style,
we have to remember which callbackID to delete.

This patch fixes the RPC wire definition to contain all the
needed pieces of information, and hooks into the server and
client side improvements of the previous patches, in order to
switch over to full server-side filtering of network events.
Also, since we fixed this in time, all released versions of
libvirtd that support network events also support per-network
filtering, so we can hard-code that assumption into
network_event.c.

Converting domain events to server-side filtering will require
the introduction of new RPC numbers, as well as a server
feature bit that the client can use to tell whether to use
old-style (server only supports global events) or new-style
(server supports filtered events), so that is deferred to a
later set of patches.

* src/conf/network_event.c (virNetworkEventStateRegisterClient):
Assume server-side filtering.
* src/remote/remote_protocol.x
(remote_connect_network_event_register_any_args): Add network
argument.
(remote_connect_network_event_register_any_ret): Return callbackID
instead of count.
(remote_connect_network_event_deregister_any_args): Pass
callbackID instead of eventID.
(remote_connect_network_event_deregister_any_ret): Drop unused
type.
(remote_network_event_lifecycle_msg): Add callbackID.
* daemon/remote.c
(remoteDispatchConnectNetworkEventDeregisterAny): Drop unused arg,
and deal with callbackID from client.
(remoteRelayNetworkEventLifecycle): Pass callbackID.
(remoteDispatchConnectNetworkEventRegisterAny): Likewise, and
recognize non-NULL network.
* src/remote/remote_driver.c
(remoteConnectNetworkEventRegisterAny): Pass network, and track
server side id.
(remoteConnectNetworkEventDeregisterAny): Deregister by callback id.
(remoteNetworkBuildEventLifecycle): Pass remote id to event queue.
* src/remote_protocol-structs: Regenerate.
Signed-off-by: NEric Blake <eblake@redhat.com>

The virConnectDomainXMLToNative API should require 'connect:write'
not 'connect:read', since it will trigger execution of the QEMU
binaries listed in the XML.

Also make virConnectDomainXMLFromNative API require a full
read-write connection and 'connect:write' permission. Although the
current impl doesn't trigger execution of QEMU, we should not
rely on that impl detail from an API permissioning POV.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

https://bugzilla.redhat.com/show_bug.cgi?id=1012818

Commit 6d7d0b18 (in 1.1.2) added bounds
checking to virDomainGetJobStats. But even at that time the API was able
to return 20 parameters while the limit was set to 16.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

Signed-off-by: NGiuseppe Scrivano <gscrivan@redhat.com>
Signed-off-by: NEric Blake <eblake@redhat.com>

The polkit access driver used the wrong permission names for checks
on storage pools, volumes and node devices. This led to them always
being denied access.

The 'dettach' permission was also mis-spelt and should have been
'detach'. While permission names are ABI sensitive, the fact that
the code used the wrong object name for checking node device
permissions, means that no one could have used the mis-spelt
'dettach' permission.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

The return values for the virConnectListAllSecrets call were not
bounds checked. This is a robustness issue for clients if
something where to cause corruption of the RPC stream data.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

The return values for the virConnectListAllNWFilters call were not
bounds checked. This is a robustness issue for clients if
something where to cause corruption of the RPC stream data.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

The return values for the virConnectListAllNodeDevices call were not
bounds checked. This is a robustness issue for clients if
something where to cause corruption of the RPC stream data.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

The return values for the virConnectListAllInterfaces call were not
bounds checked. This is a robustness issue for clients if
something where to cause corruption of the RPC stream data.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

The return values for the virConnectListAllNetworks call were not
bounds checked. This is a robustness issue for clients if
something where to cause corruption of the RPC stream data.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

The return values for the virStoragePoolListAllVolumes call were not
bounds checked. This is a robustness issue for clients if
something where to cause corruption of the RPC stream data.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

The return values for the virConnectListAllStoragePools call were not
bounds checked. This is a robustness issue for clients if
something where to cause corruption of the RPC stream data.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

The return values for the virConnectListAllDomains call were not
bounds checked. This is a robustness issue for clients if
something where to cause corruption of the RPC stream data.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

The return values for the virDomain{SnapshotListAllChildren,ListAllSnapshots}
calls were not bounds checked. This is a robustness issue for clients if
something where to cause corruption of the RPC stream data.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

The return values for the virDomainGetJobStats call were not
bounds checked. This is a robustness issue for clients if
something where to cause corruption of the RPC stream data.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

The parameters for the virDomainMigrate*Params RPC calls were
not bounds checks, meaning a malicious client can cause libvirtd
to consume arbitrary memory

This issue was introduced in the 1.1.0 release of libvirt
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Since they make use of file descriptor passing, the remote protocol
methods for virDomainCreate{XML}WithFiles must be written by hand.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Wire up the remote protocol

This patch implements extensible variants of all internal migration APIs
used for v3 migration.