Signed-off-by: NAndrea Bolognani <abologna@redhat.com>

Signed-off-by: NAndrea Bolognani <abologna@redhat.com>

Signed-off-by: NAndrea Bolognani <abologna@redhat.com>

Both VIR_DOMAIN_FEATURE_HPT and VIR_DOMAIN_FEATURE_HTM are
handled in the exact same way, so we can remove some duplicated
code without losing any functionality.
Signed-off-by: NAndrea Bolognani <abologna@redhat.com>

Signed-off-by: NWang Huaqiang <huaqiang.wang@intel.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

Adding the interface in qemu to report CMT statistic information
through command 'virsh domstats --cpu-total'.

Below is a typical output:

         # virsh domstats 1 --cpu-total
         Domain: 'ubuntu16.04-base'
           ...
           cpu.cache.monitor.count=2
           cpu.cache.monitor.0.name=vcpus_1
           cpu.cache.monitor.0.vcpus=1
           cpu.cache.monitor.0.bank.count=2
           cpu.cache.monitor.0.bank.0.id=0
           cpu.cache.monitor.0.bank.0.bytes=4505600
           cpu.cache.monitor.0.bank.1.id=1
           cpu.cache.monitor.0.bank.1.bytes=5586944
           cpu.cache.monitor.1.name=vcpus_4-6
           cpu.cache.monitor.1.vcpus=4,5,6
           cpu.cache.monitor.1.bank.count=2
           cpu.cache.monitor.1.bank.0.id=0
           cpu.cache.monitor.1.bank.0.bytes=17571840
           cpu.cache.monitor.1.bank.1.id=1
           cpu.cache.monitor.1.bank.1.bytes=29106176
Signed-off-by: NWang Huaqiang <huaqiang.wang@intel.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

The call of virResctrlMonitorGetStats will allocate the memory for
holding cache occupancy or memory bandwidth statistics.

This patch adds the function virResctrlMonitorFreeStats as the
opposing action of virResctrlMonitorGetStats to free the memory.
Signed-off-by: NWang Huaqiang <huaqiang.wang@intel.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

Return a list of virResctrlMonitorStatsPtr instead of
a virResctrlMonitorStats array in virResctrlMonitorGetStats.
Signed-off-by: NWang Huaqiang <huaqiang.wang@intel.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

Signed-off-by: NMarek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Reviewed-by: NJim Fehlig <jfehlig@suse.com>

Handle PVH domain type in both directions (xen-xl->xml, xml->xen-xl).
And add a test for it.
Signed-off-by: NMarek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Reviewed-by: NJim Fehlig <jfehlig@suse.com>

builder="hvm" is deprecated since Xen 4.10, new syntax is type="hvm" (or
type="pv", which is default). Since the old one is still supported,
still use it when writing native config, so the config will work on
older Xen too (and will also not complicate tests).
Signed-off-by: NMarek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Reviewed-by: NJim Fehlig <jfehlig@suse.com>

Signed-off-by: NMarek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Reviewed-by: NJim Fehlig <jfehlig@suse.com>

Since this is something between PV and HVM, it makes sense to put the
setting in place where domain type is specified.
To enable it, use <os><type machine="xenpvh">xenpvh</type></os>. It is
also included in capabilities.xml, for every supported HVM guest type - it
doesn't seems to be any other requirement (besides new enough Xen).
Signed-off-by: NMarek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Reviewed-by: NJim Fehlig <jfehlig@suse.com>

Make it easier to share HVM and PVH code where relevant. No functional
change.
Signed-off-by: NMarek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Reviewed-by: NJim Fehlig <jfehlig@suse.com>

The test driver state (@testDriver) uses it's own reference counting
and locking implementation. Instead of doing that, convert @testDriver
into a virObjectLockable and use the provided functionalities.
Signed-off-by: NMarc Hartmayer <mhartmay@linux.ibm.com>
Reviewed-by: NBoris Fiuczynski <fiuczy@linux.ibm.com>

There are certain cases e.g. containers where the sysfs path might
exists, but might fail. Unfortunately the exact restrictions are only
known to libvirt when trying to write to it so we need to try it.

But in case it fails there is no need to fully abort, in those cases try
to fall back to the older ioctl interface which can still work.

That makes setting up a bridge in unprivileged LXD containers work.

Fixes: https://bugs.launchpad.net/ubuntu/+source/libvirt/+bug/1802906Signed-off-by: NChristian Ehrhardt <christian.ehrhardt@canonical.com>
Reviewed-by: NDaniel P. Berrangé <berrange@redhat.com>
Reviewed-by: NLaine Stump <laine@laine.org>
Reported-by: NBrian Candler <b.candler@pobox.com>

If migration is cancelled or confirm phase fails the domain
should be kept on the source even if VIR_MIGRATE_UNDEFINE_SOURCE
was requested.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NJiri Denemark <jdenemar@redhat.com>

There are some checks done when parsing a migration cookie. For
instance, one of the checks ensures that the domain is not being
migrated onto the same host. If that is the case, then we are in
big trouble because the @vm is the same domain object used by
source and it has some jobs sets and everything so recovering
from failed cookie parsing would be needlessly hard.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NJiri Denemark <jdenemar@redhat.com>

The function currently takes virDomainObjPtr because it's using
both: the domain definition and domain private data.
Unfortunately, this means that in prepare phase we can't parse
migration cookie before putting incoming domain def onto domain
objects list (addressed in the very next commit). Change the
arguments so that virDomainDef and private data are passed
instead of virDomainObjPtr.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NJiri Denemark <jdenemar@redhat.com>

There are several functions called in the cleanup path. Some of
them do report error (e.g. qemuDomainRemoveInactiveJob()) which
may result in overwriting an error reported earlier with some
less useful message.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NJiri Denemark <jdenemar@redhat.com>

virt-aa-helper needs to grant QEMU access to VFIO MDEV devices.

This extends commit 74e86b6b which only covered PCI hostdevs for VFIO-PCI
assignment by now also covering vfio MDEVs.
It has still the same limitations regarding the device lifecycle, IOW we're
unable to predict the actual VFIO device being created, thus we need
wildcards.

Also note that the hotplug case, where apparmor is able to detect the actual
VFIO device during runtime, is already covered by commit 606afafb.
Signed-off-by: NChristian Ehrhardt <christian.ehrhardt@canonical.com>
Reviewed-by: NErik Skultety <eskultet@redhat.com>
Reviewed-by: NBoris Fiuczynski <fiuczy@linux.ibm.com>

The path argument of virFileIsDir should be a full name
of file, pathname and filename. Fixed it by passing the
full path name to virFileIsDir.
Signed-off-by: NWang Huaqiang <huaqiang.wang@intel.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

Since the functions only return 0 or 1, they should return bool.  I missed the
change when "refactoring" the first commit.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

The virGet*ID() functions should be called only if the user exists not when it
doesn't.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

Signed-off-by: NJohn Ferlan <jferlan@redhat.com>
ACKed-by: NMichal Privoznik <mprivozn@redhat.com>

Add a command to allow for setting various dynamic IOThread polling
interval scope (poll-max-ns, poll-grow, and poll-shrink). Describe
the values in the virsh.pod in as generic terms as possible. The
more specific QEMU algorithm has been divulged in the previous patch.

Based heavily on code originally posted by Pavel Hrdina
<phrdina@redhat.com>, but altered to only provide one command
and to not managed a poll disabled state.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>
ACKed-by: NMichal Privoznik <mprivozn@redhat.com>

https://bugzilla.redhat.com/show_bug.cgi?id=1545732

Implement the QEMU driver mechanism in order to set the polling
parameters for an IOThread within the bounds specified by the
QEMU qapi parameter passing.

Based heavily on patches originally posted by Pavel Hrdina
<phrdina@redhat.com>, but modified to only handle alterations
for a running guest. For the most part the API names changed,
the typed parameters removed the poll enabled value, and the
capabilities check was moved to just before the live attempt
to set. Since changes are only supported for a running guest,
no guest XML alterations were kept.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>
ACKed-by: NMichal Privoznik <mprivozn@redhat.com>

Add a capability check for IOThread polling (all were added at the
same time, so only one check is necessary).

Based on code originally posted by Pavel Hrdina <phrdina@redhat.com>
with the only changes to include the more recent QEMU releases.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>
ACKed-by: NMichal Privoznik <mprivozn@redhat.com>

Rather than passing an iothread_id, let's pass a qemuMonitorIOThreadInfo
structure so that a subsequent change to modify the iothread info can
just generate and pass one.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>
ACKed-by: NMichal Privoznik <mprivozn@redhat.com>

We're about to add a new state "modify" and thus the function
goes from just Add/Del. Use an enum to manage.

Extracted from code originally posted by Pavel Hrdina
<phrdina@redhat.com>, but placed into a separate patch.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>
ACKed-by: NMichal Privoznik <mprivozn@redhat.com>

Add functions to set the IOThreadInfo param data for the live guest.
Modify the _qemuMonitorIOThreadInfo to have a flag to indicate when
a value was set so that we don't set a value unless it was desired
to be set.

Based on code originally posted by Pavel Hrdina <phrdina@redhat.com>,
but extracted into a separate patch. Note that qapi expects to receive
integer parameters rather than unsigned long long or unsigned int's.
QEMU does save the value in larger signed 64 bit values eventually.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>
ACKed-by: NMichal Privoznik <mprivozn@redhat.com>

Create a new API that will allow an adjustment of IOThread
polling parameters for the specified IOThread. These parameters
will not be saved in the guest XML. Currently the only parameters
supported will allow the hypervisor to adjust the parameters used
to limit and alter the scope of the polling interval. The polling
interval allows the IOThread to spend more or less time processing
in the guest.

Based on code originally posted by Pavel Hrdina <phrdina@redhat.com>
to add virDomainAddIOThreadParams and virDomainModIOThreadParams.
Modification of those changes to use virDomainSetIOThreadParams
instead and remove concepts related to saving the data in guest
XML as well as the way to specifically enable the polling parameters.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>
ACKed-by: NMichal Privoznik <mprivozn@redhat.com>

Add an --iothread qualifier to domstats and an explanation in
the man page. Describe the values in as generic terms as possible
allowing each hypervisor to provide a specific algorithm to utilize
the values as it sees fit.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>
ACKed-by: NMichal Privoznik <mprivozn@redhat.com>

Process the IOThreads polling stats if available. Generate the
output params record to be returned to the caller with the three
values - poll-max-ns, poll-grow, and poll-shrink.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>
ACKed-by: NMichal Privoznik <mprivozn@redhat.com>

Separate out the fetch of the IOThread monitor call into a separate
helper so that a subsequent domain statistics change can fetch the raw
IOThread data and parse it as it sees fit.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>
ACKed-by: NMichal Privoznik <mprivozn@redhat.com>

If there are IOThread polling values in the query-iothreads return
buffer, then fill them in and set a bool indicating their presence.
This will allow for displaying in a domain stats output eventually.

Note that the QEMU values are managed a bit differently (as int's
stored in int64_t's) than we will manage them (as unsigned long and
int values). This is intentional to allow for value validation
checking when it comes time to provide the values to QEMU.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>
ACKed-by: NMichal Privoznik <mprivozn@redhat.com>

Item redundancy, some forgotten extra blank lines, etc.
Signed-off-by: NZhiPeng Lu <luzhipeng@uniudc.com>
Reviewed-by: NErik Skultety <eskultet@redhat.com>

Introduced-by: c3a208afReported-by: NRadoslaw Biernacki <radoslaw.biernacki@linaro.org>
Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

virXMLFormatElement() might fail, but we were not checking
its return value.

Fixing this requires us to change virDomainDeviceInfoFormat()
so that it can report an error back to the caller.

Introduced-by: 0d6b8733
Spotted-by: Coverity
Reported-by: NJohn Ferlan <jferlan@redhat.com>
Signed-off-by: NAndrea Bolognani <abologna@redhat.com>
Reviewed-by: NPavel Hrdina <phrdina@redhat.com>

In many cases, an early exit from a function would cause
memory allocated by local virBuffer instances not to be
released.

Provide proper cleanup paths to solve the issue.
Signed-off-by: NAndrea Bolognani <abologna@redhat.com>
Reviewed-by: NPavel Hrdina <phrdina@redhat.com>