Otherwise we can end up with a dangling job that can only be cleared by
restarting libvirtd.

Log debug messages anytime we call *BeginJob* or *EndJob* so that it's
easier to spot incorrect usage of domain job APIs.

Detected by Coverity.  p (the pointer to the string) is always true;
when in reality, we wanted to know whether the integer value of the
just-parsed string is '0' or '1'.  Logic bug since commit b1b5b51a.

* src/qemu/qemu_monitor_text.c (qemuMonitorTextGetBlockInfo): Set
results to proper value.

Detected by Coverity.  If, for some reason, our text monitor input
does not match our assumptions, we end up incrementing p while it
is NULL, then dereferencing the pointer 0x1, which will fault.

* src/qemu/qemu_monitor_text.c
(qemuMonitorTextGetBlockStatsParamsNumber): Rewrite to avoid
deref of strchr failure.  Fix indentation.

Detected by Coverity.  Introduced in commit b1b5b51a.

* src/qemu/qemu_monitor_json.c (qemuMonitorJSONGetBlockInfo):
Avoid null dereference.

Coverity complained that most, but not all, clients of virUUIDParse
were checking for errors.  Silence those coverity warnings by
explicitly marking the cases where we trust the input, and fixing
one instance that really should have been checking.  In particular,
this silences a rather large percentage of the warnings I saw on my
most recent Coverity analysis run.

* src/util/uuid.h (virUUIDParse): Enforce rules.
* src/util/uuid.c (virUUIDParse): Drop impossible check; at least
Coverity will detect if we break rules and pass NULL.
* src/xenapi/xenapi_driver.c (xenapiDomainCreateXML)
(xenapiDomainLookupByID, xenapiDomainLookupByName)
(xenapiDomainDefineXML): Ignore return when we trust data source.
* src/vbox/vbox_tmpl.c (nsIDtoChar, vboxIIDToUUID_v3_x)
(vboxCallbackOnMachineStateChange)
(vboxCallbackOnMachineRegistered, vboxStoragePoolLookupByName):
Likewise.
* src/node_device/node_device_hal.c (gather_system_cap): Likewise.
* src/xenxs/xen_sxpr.c (xenParseSxpr): Check for errors.

In virFDStreamOpenFileInternal(), a errfd pipe is opened by
virCommandRunAsync() and given to virFDStreamOpenInternal().

It seems virFDStream should close errfd, just like the other
fd it is given.

This fixes screenshots leaking FDs:
http://bugzilla.redhat.com/show_bug.cgi?id=745761

virCommandTransferFD promises that the fd is no longer owned by
the caller.  Normally, we want the fd to remain open until the
child runs, but in error situations, we must close it earlier.

* src/util/command.c (virCommandTransferFD): Close fd now if we
can't track it to close later.
(virCommandKeepFD): Adjust helper to make this easier.

s/Mouting/Mounting.
Signed-off-by: NSerge Hallyn <serge.hallyn@canonical.com>

* libvirt.spec.in (%configure): Drop unused %{one} macro.
* mingw32-libvirt.spec.in (%{rhel}): Compile ESX but not HyperV on
mingw build for RHEL.
(%build): Make configure honor spec conditionals.  Reorder to
match libvirt.spec.
* autobuild.sh (mingw): Update list to match.
Suggested by Daniel P. Berrange.

358 changes; most probably have no impact on libvirt, but we
might as well stay current.

* .gnulib: Update to latest.

As this is needed. Although some functions check for domain
being active before obtaining job, we need to check it after,
because obtaining job unlocks domain object, during which
a state of domain can be changed.

Currently, push & pop from event queue (both server & client side)
rely on lock from higher levels, e.g. on driver lock (qemu),
private_data (remote), ...; This alone is not sufficient as not
every function that interacts with this queue can/does lock,
esp. in client where we have a different approach, "passing
the buck".

Therefore we need a separate lock just to protect event queue.

For more info see:
https://bugzilla.redhat.com/show_bug.cgi?id=743817

This patch extends qemudDomainCoreDump so it supports new VIR_DUMP_RESET
flag. If this flag is set, domain is reset on successful dump. However,
this is needed to be done after we start CPUs.

This flag is intended to allow user to do so called system reset
after dump, instead of sending ACPI reboot event.

Add support for enabling debug output via command line option.
Allow to toggle the loop implementation between pure-Python and
native-C.
Signed-off-by: NPhilipp Hahn <hahn@univention.de>

When --help is requested, print usage() to stdout.
When an illegal option is passed, print usage to stderr.
Signed-off-by: NPhilipp Hahn <hahn@univention.de>

sys.argv contains the original command line arguments, while args only
contains the arguments not handled by getopt(). Currently this is no
problem since --help is the only command line option passable, which
terminates the process, so the code is never reached. Any option added
in the future will reveal the bug.
Signed-off-by: NPhilipp Hahn <hahn@univention.de>

With the recent refactoring of qemu snapshot relationships, it
is now trivial to filter on leaves.

* src/conf/domain_conf.c (virDomainSnapshotObjListCount)
(virDomainSnapshotObjListCopyNames): Handle new flag.
* src/qemu/qemu_driver.c (qemuDomainSnapshotListNames)
(qemuDomainSnapshotNum, qemuDomainSnapshotListChildrenNames)
(qemuDomainSnapshotNumChildren): Pass new flag through.

Counterpart to --roots.

* include/libvirt/libvirt.h.in (VIR_DOMAIN_SNAPSHOT_LIST_LEAVES):
New flag.
* src/libvirt.c (virDomainSnapshotNum, virDomainSnapshotListNames)
(virDomainSnapshotNumChildren)
(virDomainSnapshotListChildrenNames): Document it.
* tools/virsh.c (cmdSnapshotList): Expose it.
* tools/virsh.pod (snapshot-list): Document --leaves.

For some versions of Xen the difference between "tap" and "tap2" is
important. When converting back from xen-sxpr to libvirt-xml, that
information is lost, which breaks re-defining the domain using that
data.

Explicitly return "tap2" for disks defined as "device/tap2".
Signed-off-by: NPhilipp Hahn <hahn@univention.de>

When PyGrub is used as the bootloader in Xen, it gets passed the first
bootable disk. Xend supports a "bootable"-flag for this, which isn't
explicitly supported by libvirt.
When converting libvirt-xml to xen-sxpr the "bootable"-flag gets
implicitly set by xen.xend.XenConfig.device_add() for the first disk
(marked as "Compat hack -- mark first disk bootable").
When converting back xen-sxpr to libvirt-xml, the disks are returned in
the internal order used by Xend ignoring the "bootable"-flag, which
loses the original order. When the domain is then re-defined, the order
of disks is changed, which breaks PyGrub, since a different disk gets
passed.

When converting xen-sxpr to libvirt-xml, use the "bootable"-flag to
determine the first disk.

This isn't perfect, since several disks can be marked as bootable using
the Xend-API, but that is not supported by libvirt. In all known cases
relevant to libvirt exactly one disk is marked as bootable.
Signed-off-by: NPhilipp Hahn <hahn@univention.de>

AM_TESTS has support for skipping tests, while the C-implementation
virtTestRun() does not support that feature.

Print "_" or "SKIP" in verbose mode for tests returning EXIT_AM_SKIP=77.
Signed-off-by: NPhilipp Hahn <hahn@univention.de>

VirtFS allows the user to choose between path/handle based fs driver.
As of now, libvirt hardcoded path based driver only. This patch provides
a solution to allow user to choose between path/handle based fs driver.

Sample:

    <filesystem type='mount'>
      <driver type='handle'/>
      <source dir='/folder/to/share1'/>
      <target dir='mount_tag1'/>
    </filesystem>

    <filesystem type='mount'>
      <driver type='path'/>
      <source dir='/folder/to/share2'/>
      <target dir='mount_tag2'/>
    </filesystem>
Signed-off-by: NHarsh Prateek Bora <harsh@linux.vnet.ibm.com>
Signed-off-by: NEric Blake <eblake@redhat.com>

Implement a generic helper to escape a given set of characters with a
leading '\'.  Generalizes virBufferEscapeSexpr().
Signed-off-by: NSage Weil <sage@newdream.net>

This is a regression introduced by new RPC codes, previously
we advertise the service via ssh even if the daemon doesn't
listen on TLS port (TCP is not choosed). Now the service is
only advertised when it listens on TLS or TCP port. This breaks
upper layer apps which intends to discover the service, such
as virt-manager.

The previous optimizations lead to some follow-on cleanups.

* src/conf/domain_conf.c (virDomainSnapshotForEachChild)
(virDomainSnapshotForEachDescendant): Drop dead parameter.
(virDomainSnapshotActOnDescendant)
(virDomainSnapshotObjListNumFrom)
(virDomainSnapshotObjListGetNamesFrom): Update callers.
* src/qemu/qemu_driver.c (qemuDomainSnapshotNumChildren)
(qemuDomainSnapshotListChildrenNames, qemuDomainSnapshotDelete):
Likewise.
* src/conf/domain_conf.h: Update prototypes.

Among other improvements, virDomainSnapshotForEachDescendant is
changed from iterative O(n^2) to recursive O(n).  A bit better
than the O(n^3) implementation in virsh snapshot-list!

* src/conf/domain_conf.c (virDomainSnapshotObjListNum)
(virDomainSnapshotObjListNumFrom)
(virDomainSnapshotObjeListGetNames, virDomainSnapshotForEachChild)
(virDomainSnapshotForEachDescendant): Optimize.
(virDomainSnapshotActOnDescendant): Tweak.
(virDomainSnapshotActOnChild, virDomainSnapshotMarkDescendant):
Delete, now that they are unused.

Maintain the parent/child relationships of all qemu snapshots.

* src/qemu/qemu_driver.c (qemuDomainSnapshotLoad): Populate
relationships after loading.
(qemuDomainSnapshotCreateXML): Set relations on creation; tweak
redefinition to reuse existing object.
(qemuDomainSnapshotReparentChildren, qemuDomainSnapshotDelete):
Clear relations on delete.

No one was using virDomainSnapshotHasChildren, but that was an
O(n) function.  Exposing and tracking a bit more metadata for each
snapshot will allow the same query to be made with an O(1) query
of the member field.  For single snapshot operations (create,
delete), callers can be trusted to maintain the metadata themselves,
but for reloading, we can't compute parents as we go since there
is no guarantee that parents were parsed before children, so we also
provide a function to refresh the relationships, and which can
be used to detect if the user has ignored our warnings and been
directly modifying files in /var/lib/libvirt/qemu/snapshot.  This
patch only adds metadata; later patches will actually use it.

This layout intentionally hardcodes the size of each snapshot struct,
by tracking sibling pointers, rather than having to deal with the
headache of yet more memory management by directly sticking a
dynamically sized child[] on each parent.

* src/conf/domain_conf.h (_virDomainSnapshotObj)
(_virDomainSnapshotObjList): Add members.
(virDomainSnapshotUpdateRelations, virDomainSnapshotDropParent):
New prototypes.
(virDomainSnapshotHasChildren): Delete.
* src/conf/domain_conf.c (virDomainSnapshotSetRelations)
(virDomainSnapshotUpdateRelations, virDomainSnapshotDropParent):
New functions.
(virDomainSnapshotHasChildren): Drop unused function.
* src/libvirt_private.syms (domain_conf): Update exports.

To date, JSON disk snapshots worked by accident, as they were always
using hmp fallback due to a typo in commit e702b5ba not picking up
on the (intentional) difference in command names between the two
monitor protocols.

* src/qemu/qemu_monitor_json.c (qemuMonitorJSONDiskSnapshot):
Spell QMP command correctly.
Reported by Luiz Capitulino.

Rather than having to do:

$ virsh snapshot-revert dom $(virsh snapshot-current dom --name)

I thought it would be nice to do:

$ virsh snapshot-revert dom --current

I didn't add 'virsh snapshot-dumpxml --current' since we already have
'virsh snapshot-current' for the same task.  snapshot-list accepted
a name but did not require it, and that remains the case, with
--current serving in place of that name.  For all other commands,
name used to be required, and can now be replaced by --current;
I intentionally made it so that omitting both --current and a name
is an error (having the absence of a name imply --current seems
just a bit too magic, so --current must be explicit).  I also had
to keep snapshot-edit backwards-compatible, as the only command
that already had a --current argument alongside a name, which still
works to both edit a named snapshot and make it current.

* tools/virsh.c (vshLookupSnapshot): New helper function.
(cmdSnapshotEdit, cmdSnapshotList, cmdSnapshotParent)
(cmdSnapshotDelete, cmdDomainSnapshotRevert): Use it, adding an
option where needed.
* tools/virsh.pod (snapshot-delete, snapshot-edit)
(snapshot-list, snapshot-parent, snapshot-revert): Document
use of --current.
(snapshot-dumpxml): Mention alternative.

Detected by autogen.sh on a cross-mingw build:

Creating library file: .libs/libvirt.dll.a
Cannot export virNetSASLContextCheckIdentity: symbol not defined
Cannot export virNetSASLContextNewServer: symbol not defined
...

* src/libvirt_private.syms (virnetsaslcontext.h): Move symbols...
* src/libvirt_sasl.syms: ...to new file.
* src/Makefile.am (USED_SYM_FILES) [HAVE_SASL]: Use new file.
(EXTRA_DIST): Ship it.

Since commit ddf3bd32, 'make rpm' failed with:

RPM build errors:
    File not found: /home/remote/eblake/rpmbuild/BUILDROOT/libvirt-0.9.6-1.fc14.eblake1318366440.x86_64/usr/share/systemtap/tapset/libvirtd.stp

* libvirt.spec.in (with_dtrace): Match installed .stp files.

I got these distcheck failures with sanlock enabled:

ERROR: files left in build directory after distclean:
./tools/virt-sanlock-cleanup
./src/locking/qemu-sanlock.conf

* src/Makefile.am (DISTCLEANFILES) [HAVE_SANLOCK]: Clean built
file.
* tools/Makefile.am (DISTCLEANFILES): Likewise.

Otherwise, 'make rpm' fails with:

  GEN    libvirt_qemu.def
make[2]: *** No rule to make target `dtrace2systemtap.pl', needed by `libvirt_probes.stp'.  Stop.

* src/Makefile.am (EXTRA_DIST): Add recent script additions.

when building libvirt in Fedora/s390x I've found that xenlight needs to
be explicitly disabled in the spec file. Configure properly sets the
library as non-existent, but the %files section still wants to package
the 3 /var/*/libvirt/libxl directories. See also
https://bugzilla.redhat.com/show_bug.cgi?id=745020

Building on Linux with dtrace enabled was failing 'make check':

  CCLD   nodeinfotest
../src/.libs/libvirt_test.a(libvirt_net_rpc_client_la-virnetclient.o): In function `virNetClientNew':
/home/remote/eblake/libvirt/src/rpc/virnetclient.c:162: undefined reference to `libvirt_rpc_client_new_semaphore'

On looking further, I see some earlier warnings emitted from libtool:

*** Warning: Linking the shared library libvirt.la against the non-libtool
*** objects  probes.o is not portable!

Since src/probes.o is only built on Linux, and even then, only when
dtrace is enabled, this failure does not affect other platforms, and
despite libtool warning that it is not generally portable, it is not
a problem for our use-case in libvirt.la.  But it turns out that while
libtool is willing to jam raw .o files into an installed shared
library (libvirt.la becomes libvirt.so), it is NOT willing to jam
the same .o file into the convenience library libvirt_test.la.
Perhaps this is a bug in libtool, but even if we get libtool fixed,
libvirt must continue to build on platforms with older libtool.  So,
the fix is the same as we are already using for the libvirt_lxc
executable - don't rely on the .o file being in the convenience
library, but instead use LDADD to pull it in directly.

* tests/Makefile.am (PROBES_O): New macro.
(LDADDS): Use it to fix link errors.