Aggregate setup of various aspects of a disk source (secrets, TLS, ...)
into one function so that we don't need to call multiple across the code
base.

Match the prefix of the file and choose a name which better describes
what happens.

Improve the formatter so that we can use the 'debug' property straight
away when using json.

Some drive backends allow output of debugging information which can be
configured using properties of the image. Add fields to virStorageSource
which will allow configuring them.

The 'file.password-secret' injection should be used only if we are using
the old formatter. When formatting the source string from the JSON
properties, the property should be added there.

Also drop the comment which refers to stuff that will not be used in
libvirt since -blockdev is the way to go.

Qemu has now an internal mechanism for locking images to fix specific
cases of disk corruption. This requires libvirt to mark the image as
shared so that qemu lifts certain restrictions.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1378242

'share-rw' for the disk device configures qemu to allow concurrent
access to the backing storage.

The capability is checked in various supported disk frontend buses since
it does not make sense to partially backport it.

Pivoting to a unsupported storage type might break the assumption that
shared disks will not corrupt metadata.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1511480

Creating a snapshot would introduce a possibly unsupported member for
sharing into the backing chain. Add a check to prevent that from
happening.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1511480

Disk sharing between two VMs may corrupt the images if the format driver
does not support it. Check that the user declared use of a supported
storage format when they want to share the disk.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1511480

Storage source format backing a shared device (e.g. running a cluster
filesystem) needs to support the sharing so that metadata are not
corrupted. Add a central function for checking this.

Use a style that will discourage from adding inline checks.

Move network device validation into a separate function.

Move the code so that both the new image and old image can be verified
in the same function.

Since we already have such support for libxl all we need is qemu
driver adjustment. And a test case.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

This capability says if qemu is capable of specifying distances
between NUMA nodes on the command line. Unfortunately, there's no
real way to check this and thus we have to go with version check.
QEMU introduced this in 0f203430dd8 (and friend) which was
released in 2.10.0.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

The function returns true/false depending on distance
configuration being present in the domain XML.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

There's no point in checking if numa->mem_nodes[node].ndistances
is set if we check for numa->mem_nodes[node].distances. However,
it makes sense to check if the sibling node (@cellid) caller
passed falls within boundaries.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

When QEMU dies, we read its output stored in a log file and use it for
reporting a hopefully useful error. However, virReportError will trim
the message to (VIR_ERROR_MAX_LENGTH - 1) characters, which means the
end of the log (which likely contains the error message we want to
report) may get lost. We should trim the beginning of the log instead.

https://bugzilla.redhat.com/show_bug.cgi?id=1335534Signed-off-by: NJiri Denemark <jdenemar@redhat.com>
Reviewed-by: NPavel Hrdina <phrdina@redhat.com>

And use it instead of a magic 1024 constant.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>
Reviewed-by: NPavel Hrdina <phrdina@redhat.com>

When reading QEMU log for reporting it as an error message, we want to
skip "char device redirected to" line. However, this string is not
printed at the beginning of a line, which means STRPREFIX will never
find it.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>
Reviewed-by: NPavel Hrdina <phrdina@redhat.com>

Do not access any data if strlen() == 0.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

Explain that certain attributes formatted with -drive are in fact
attributes of the drive itself and not the storage backing it.

That's a disk frontend attribute. Move the code to a separate function
since it's non-trivial and call it from the frontend attribute
formatter.

Isolate it from the other code.

Move all logic depending on whether we are solely formatting -drive (no
-device along with it) into one block.

Move together sections which are conditionaly executed depending on
whether -device will be used together with the -drive.

Disk serial is not a property of the image but of the disk frontend.
Account for this appropriately.

Historically we've formatted a lot of the attributes of a disk (disk
geometry, etc) with -drive. Since we use -device now, they should be
formatted there. Extract them to a separate function for keeping
compatibility with SDcards which still use only -drive.

Start this by moving the geometry into a separate function.

When doing block commit we need to allow write for members of the
backing chain so that we can commit the data into them.

qemuDomainDiskChainElementPrepare was used for this which since commit
786d8d91 calls qemuDomainNamespaceSetupDisk which has very adverse
side-effects, namely it relabels the nodes to the same label it has in
the main namespace. This was messing up permissions for the commit
operation since its touching various parts of a single backing chain.

Since we are are actually not introducing new images at that point add a
flag for qemuDomainDiskChainElementPrepare which will refrain from
calling to the namespace setup function.

Calls from qemuDomainSnapshotCreateSingleDiskActive and
qemuDomainBlockCopyCommon do introduce new members all calls from
qemuDomainBlockCommit do not, so the calls are anotated accordingly.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1506072

https://bugzilla.redhat.com/show_bug.cgi?id=1434451

Just like in 9324f67a we need to put default pci-root
alias onto the command line instead of the one provided by user.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

https://bugzilla.redhat.com/show_bug.cgi?id=1434451

Just like in 9324f67a we need to put default sata alias
(which is hardcoded to "ide", obvious, right?) onto the command
line instead of the one provided by user.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

This function only queries domain @def. It doesn't change it.
Therefore it should take const pointer.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

The compiler can warn us if we add a value to the
virDomainChrSerialTargetType enumeration but forget to handle
it properly in the code. Let's take advantage of that.

This commit is best viewed with 'git diff -w'.
Signed-off-by: NAndrea Bolognani <abologna@redhat.com>
Reviewed-by: NPavel Hrdina <phrdina@redhat.com>

Add a separate capability for the sclplmconsole device, and check it
specifically instead of using QEMU_CAPS_DEVICE_SCLPCONSOLE for that too.
Signed-off-by: NPino Toscano <ptoscano@redhat.com>
Reviewed-by: NAndrea Bolognani <abologna@redhat.com>

Give a better name to the capability for the sclpconsole device.
Signed-off-by: NPino Toscano <ptoscano@redhat.com>
Reviewed-by: NAndrea Bolognani <abologna@redhat.com>

Up until now we assumed the spapr-vty device would always be
present, which is not very nice. Check for its availability before
using it instead.
Signed-off-by: NAndrea Bolognani <abologna@redhat.com>
Reviewed-by: NPavel Hrdina <phrdina@redhat.com>

Starting from qemu 2.11, the `-device vmcoreinfo` will create a fw_cfg
entry for a guest to store dump details, necessary to process kernel
dump with KASLR enabled and providing additional kernel details.

In essence, it is similar to -fw_cfg name=etc/vmcoreinfo,file=X but in
this case it is not backed by a file, but collected by QEMU itself.

Since the device is a singleton and shouldn't use additional hardware
resources, it is presented as a <feature> element in the libvirt
domain XML.

The device is arm/x86 only for now (targets that support fw_cfg+dma).

Related to:
https://bugzilla.redhat.com/show_bug.cgi?id=1395248Signed-off-by: NMarc-André Lureau <marcandre.lureau@redhat.com>