Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Signed-off-by: NYuri Chornoivan <yurchor@ukr.net>
Reviewed-by: NJán Tomko <jtomko@redhat.com>
Signed-off-by: NJán Tomko <jtomko@redhat.com>

The copy on read functionality is done using a separate layer in the
backing chain. Add function to generate properties for it.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Turns out that 'query-nodes' is not what we want and the
'query-blockstats' command was in fact buggy. Revert the new field since
it's not needed.

This reverts commit 50edca13.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

The 'query-blockstats' command does not return statistics for the
explicitly named nodes unless the new argument is specified. Add
infrastrucuture that will allow us to use the new approach if desired.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

With 'transaction' support we don't need to keep around the multipurpose
code which would create the snapshot if 'transaction' is not supported.

To simplify this add a new helper that just wraps the arguments for
'blockdev-snapshot-sync' operation in 'transaction' and use it instead
of qemuBlockSnapshotAddLegacy.

Additionally this allows to format the arguments prior to creating the
file for simpler cleanup.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

To allow using -blockdev with RBD we need to support the recently added
RBD authentication.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Introduce a new setup function for all the related configuration and
move the setup and attachment of the PR code.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Create a new "Prepare" function and move the drive add code into the new
helpers. This will eventually allow to simplify and unify the attaching
code for use with blockdev at the same time as providing compatibility
with older qemus.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Emphasize that it's for the 'drive' part of the disk.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

To keep feature parity, we need to be able to format the PR manager
alias when using blockdev.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

These helpers add infrastructure which simplifies adding and rolling
back virStorageSources to a running qemu instance. Using of the helper
structure and separate functions allows for a much cleaner code in the
section dealing with the monitor.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

Reference the storage via node name rather than inlining it. This is
the approach that will be used with -blockdev/blockdev-add since it
allows more control and is more future proof.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

When using blockdev-add and friends, libvirt will need to create also
properties for the qcow2/raw/... format handler in qemu. This patch adds
the infrastructure and implements all formats known to libvirt including
all properties which are expressed at the format level in qemu.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

Enabling discard for the storage node allows the format drivers to
discard snapshots and other things, while configuration of the format
layer actually decides whether to actually discard data on request from
the host.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

This will be required when doing blockdev-add to conform with the
approach qemu choses to create the disks.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

When used directly with blockdev-add/-blockdev the cache mode will need
to be specified directly for every image rather than just for the disk
itself. This implements the backing options 'direct' and 'no-flush'.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

qemu declares node-name as a 32 byte buffer and silently truncates
anything longer than that. This is unacceptable for libvirt, so we need
to make sure that we won't ever supply a node-name exceeding 31 chars.

Add a function which will do the validation and use it to validate
storage-protocol node names.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

The gluster protocol in qemu uses two styles, one of which is legacy and
not covered by the QAPI schema.

To allow using of the new style in the blockdev-add code, add a
parameter for qemuBlockStorageSourceGetBackendProps which will switch
between the two modes.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

Block storage should actually be passed to qemu via 'host_device' or
'host_cdrom' according to the device type. There were no users of this
behaviour so we thankfully can change it.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

Handle VIR_STORAGE_TYPE_DIR in qemuBlockStorageSourceGetBackendProps so
that a 'vvfat' driver is used, which emulates a FAT filesystem
containing the folders.

qemu requires us to add it as a storage layer, since a 'raw' layer is
usually put on top of it.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

'file' backend in qemu supports few more options than the current
implementation. Extract it so that changes don't pollute the code.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

It was not possible to determine whether virJSONValueObjectAddVArgs and
the functions using it would consume a virJSONValue or not when used
with the 'a' or 'A' modifier depending on when the loop failed.

Fix this by passing in a pointer to the pointer so that it can be
cleared once it's successfully consumed and the callers don't have to
second-guess leaving a chance of leaking or double freeing the value
depending on the ordering.

Fix all callers to pass a double pointer too.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>

The documentation for the JSON/qapi type 'UnixSocketAddress' states that
the unix socket path field is named 'path'. Unfortunately qemu uses
'socket' in case of the gluster driver (despite documented otherwise).

Add logic which will format the correct fields while keeping support of
the old spelling.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1544325Signed-off-by: NPeter Krempa <pkrempa@redhat.com>

The array indexes are formatted if the JSON->commandline translator is
translating an array type. It does not at all depend on this function.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>

Improve the formatter so that we can use the 'debug' property straight
away when using json.

Storage source format backing a shared device (e.g. running a cluster
filesystem) needs to support the sharing so that metadata are not
corrupted. Add a central function for checking this.

If creation of the main JSON object containing the storage portion of a
virStorageSource would fail but we'd allocate the server structure we'd
leak it. Found by coverity.

Return NULL right away in qemuBlockStorageSourceGetBackendProps when an
invalid storage source is presented so that virJSONValueObjectAdd isn't
called with a NULL argument.

Found by coverity.

Format out the node-name if it was assigned for JSON-based storage
specification.