This was broken in a dowstream build due to a missing backport:
https://bugzilla.redhat.com/show_bug.cgi?id=1182448

The path to the pty of a Xen PV console is set only in
virDomainOpenConsole. But this is done too late. A call to
virDomainGetXMLDesc done before OpenConsole will not have the path to
the pty, but a call after OpenConsole will.

e.g. of the current issue.
Starting a domain with '<console type="pty"/>'
Then:
virDomainGetXMLDesc():
  <devices>
    <console type='pty'>
      <target type='xen' port='0'/>
    </console>
  </devices>
virDomainOpenConsole()
virDomainGetXMLDesc():
  <devices>
    <console type='pty' tty='/dev/pts/30'>
      <source path='/dev/pts/30'/>
      <target type='xen' port='0'/>
    </console>
  </devices>

The patch intend to have the TTY path on the first call of GetXMLDesc.
This is done by setting up the path at domain start up instead of in
OpenConsole.

https://bugzilla.redhat.com/show_bug.cgi?id=1170743Signed-off-by: NAnthony PERARD <anthony.perard@citrix.com>

Many GCC versions don't understand -Wno-suggest-attribute=format
so the pragma must only be used when supported

It's possible to create a container with existing
disk image as root filesystem. You need to remove
existing disks from PCS VM config and then add a new
one, pointing to your image. And then call PrlVm_RegEx
with PRNVM_PRESERVE_DISK flag.

With this patch you can create such container with
something like this for new domain XML config:

    <filesystem type='file' accessmode='passthrough'>
      <driver type='ploop' format='ploop'/>
      <source file='/path-to-image'/>
      <target dir='/'/>
    </filesystem>
Signed-off-by: NDmitry Guryanov <dguryanov@parallels.com>
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Handle information about filesystems in domain config
and add corresponding devices to container via
parallels sdk.
Signed-off-by: NDmitry Guryanov <dguryanov@parallels.com>

PCS removes disk image from filesystem, if you remove it
from config. There is a special flag PVCF_DETACH_HDD_BUNDLE
which allow to remove disk only from VM/CT config.

If you call virDomainDefine and remove some disk from
config it should be preserved, so call PrlVm_CommitEx
always with flag PVCF_DETACH_HDD_BUNDLE.
Signed-off-by: NDmitry Guryanov <dguryanov@parallels.com>

Obtain information about container's filesystems and
store it in virDomainDef structure.
Signed-off-by: NDmitry Guryanov <dguryanov@parallels.com>
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Ploop is a pseudo device which makeit possible to access
to an image in a file as a block device. Like loop devices,
but with additional features, like snapshots, write tracker
and without double-caching.

It used in PCS for containers and in OpenVZ. You can manage
ploop devices and images with ploop utility
(http://git.openvz.org/?p=ploop).
Signed-off-by: NDmitry Guryanov <dguryanov@parallels.com>

This is used as a boolean parameter for the '-cpu' option.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1178853Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

Just a new feature that can be turned on/off.

https://bugzilla.redhat.com/show_bug.cgi?id=1178853Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

Commit id 'ca481a6f' added virNetworkRouteDefFree which may be called
in an error path from lxcAddNetworkRouteDefinition with 'route = NULL'.
So just add the (!def) at the top to resolve.

The 'virsh edit' command gets XML validation enabled by default,
with a --skip-validate option to disable it. The 'virsh define'
and 'virsh create' commands get a --validate option to enable
it, to avoid regressions for existing scripts.

The quality of error reporting from libxml2 varies depending
on the type of XML error made. Sometimes it is quite clear
and useful, other times it is obscure & inaccurate. At least
the user will see an error now, rather than having their
XML modification silently disappear.

We tested for positive return value from virDomainMaybeAddController,
but it returns 0 or -1 only resulting in a dead code.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

In case we find out, there are more PCI devices to be connected
than there are available slots on the default PCI bus, we automatically add a
new bus and a related PCI bridge controller as well. As there are no free slots
left on the default PCI bus, PCI bridge controller gets a free slot on a
newly created PCI bus which causes qemu to refuse to start the guest.
This fix introduces a new function qemuDomainPCIBusFullyReserved which
is checked right before we possibly try to reserve a slot for PCI bridge
controller.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1132900

Commit id 'aa2cc721' added calls to virSocketAddrFormat but did not
check for a NULL (error) return which could lead to bad output
in the XML file.  Need to check for NULL return and cause failure.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

Commit id 'aa2cc721' added call to virSocketAddrFormat
and did not VIR_FREE() the returned memory.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

If 0.0.0.0  or :: address is provided, then the returned prefix should
be 0, for the default address.

Moving code for parsing and formatting network routes to
networkcommon_conf helps reusing those routes for domains. The route
definition has been hidden to help reducing the number of unnecessary
checks in the format function.

Moving network route to the network common schema will allow reusing it.

https://bugzilla.redhat.com/show_bug.cgi?id=1182486

When updating a network and adding new ip-dhcp-host entry, the deamon
may crash. The problem is, we iterate over existing <host/> entries
trying to compare MAC addresses to see if there's already an existing
rule. However, not all entries are required to have MAC address. For
instance, the following is perfectly valid entry:

<host id='00:04:58:fd:e4:15:1b:09:4c:0e:09:af:e4:d3:8c:b8:ca:1e'
name='redhatipv6.redhat.com' ip='2001:db8:ca2:2::119'/>

When the checking loop iterates over this, the entry's MAC address is
accessed directly. Well, the fix is obvious - check if the address is
defined before trying to compare it.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

The virDomainDefineXMLFlags and virDomainCreateXML APIs both
gain new flags allowing them to be told to validate XML.
This updates all the drivers to turn on validation in the
XML parser when the flags are set

Add a helper method that can validate an XML document against
an RNG schema

A number of methods take an int for a parameter that indicates
the size of an array. The correct type for array sizes is
size_t

Every dtrace/systemd probe also include a libvirt log message.
These are logged at level DEBUG currently, which means if you
want to see all probes they are drowned by the rest of the
DEBUG messages. Since we don't really use the INFO log level
for much, it seems reasonable to suggest we log all probes at
level INFO.

When debugging libvirt it is helpful to set probes around RPC
calls. We already have probes for libvirt's native RPC layer,
so it makes sense to add them for the DBus RPC layer too.

systemd-machined introduced a new method CreateMachineWithNetwork
that obsoletes CreateMachine. It expects to be given a list of
VETH/TAP device indexes for the host side device(s) associated
with a container/machine.

This falls back to the old CreateMachine method when the new
one is not supported.

https://bugzilla.redhat.com/show_bug.cgi?id=1181182

When we meet error in qemuMigrationPrepareAny and goto
cleanup with rc < 0, we forget clear the priv->origname and this
will make this vm migrate fail next time because leave a wrong
origname in  priv, and will Generate a wrong cookie when do
migrate next time.

This patch will make priv->origname is NULL when migrate fail
in target host.
Signed-off-by: NLuyao Huang <lhuang@redhat.com>
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

Make local copy of the disk alias in qemuProcessInitPasswords,
instead of referencing the one in domain definition, which
might get freed if the domain crashes while we're in monitor.

Also copy the memballoon period value.

Make a local copy of the disk alias instead of pointing
to the domain definition, which might get freed if
the domain dies while we're in monitor.

Also exit early if that happens.

Exit the monitor right after we've done with it to get
the virDomainObjPtr lock back, otherwise we might be accessing
vm->def while it's being cleaned up by qemuProcessStop.

If the domain crashed while we were in the monitor, exit
early instead of changing vm->def which is now the persistent
definition.

This will allow us to call qemuDomainObjIsActive() in
the tested functions to check if the domain has crashed.

The domain might disappear during the time in monitor when
the virDomainObjPtr is unlocked, so the caller needs to check
if it's still alive.

Since most of the callers are going to need it, put the
check inside qemuDomainObjExitMonitor and return -1 if
the domain died in the meantime.

The virsh start <domain> fails with qemu error when the hostdevices of the
same iommu group are used actively by other vms. It is not clear which
hostdev from the same iommu group is used by any of the running guests.
User has to go through every guest xml to figure out who is using the
hostdev of same iommu group.

Solution:
Iterate the iommu group of the hostdev and error our neatly in case a
device in the same iommu group is busy. Reattach code also does the same
kind of check, remove duplicate code as well.
Signed-off-by: NShivaprasad G Bhat <sbhat@linux.vnet.ibm.com>
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Basically a getter function which is implemented for accessing the
address fields in virPCIDevice.
Signed-off-by: NShivaprasad G Bhat <sbhat@linux.vnet.ibm.com>
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Now that xenconfig supports parsing and formatting Xen's
XL config format, integrate it into the libxl driver's
connectDomainXML{From,To}Native functions.
Signed-off-by: NKiarie Kahurani <davidkiarie4@gmail.com>
Signed-off-by: NJim Fehlig <jfehlig@suse.com>

Add disk and spice config tests for the xen_xl config parser
Signed-off-by: NKiarie Kahurani <davidkiarie4@gmail.com>
Signed-off-by: NJim Fehlig <jfehlig@suse.com>