Some functions were using virDomainDeviceInfo where virDevicePCIAddress
would suffice. Some were only using integers for slots and functions,
assuming the bus numbers are always 0.

Switch from virDomainDeviceInfoPtr to virDevicePCIAddressPtr:
qemuPCIAddressAsString
qemuDomainPCIAddressCheckSlot
qemuDomainPCIAddressReserveAddr
qemuDomainPCIAddressReleaseAddr

Switch from int slot to virDevicePCIAddressPtr:
qemuDomainPCIAddressReserveSlot
qemuDomainPCIAddressReleaseSlot
qemuDomainPCIAddressGetNextSlot

Deleted functions (they would take the same parameters
as ReserveAddr/ReleaseAddr do now.)
qemuDomainPCIAddressReserveFunction
qemuDomainPCIAddressReleaseFunction

so we don't try to change uid/git to 0 when probing capabilities.

The conversion to qemuCaps dropped the ability with qemu{,-kvm} 1.2 and
newer to set the lost tick policy for the PIT. While the
-no-kvm-pit-reinjection option is depreacated, it is still supported at
least through 1.4, it is better to not lose the functionality.

The qemu driver had been calling virSecurityManagerSetProcessLabel()
from a "pre-exec hook" function that is run after the child is forked,
but before exec'ing qemu. This is problematic because the uid and gid
of the child are set by the security driver, but capabilities are
dropped by virCommand - such separation doesn't work; the two
operations must be done together or the capabilities do not transfer
properly to the child process.

This patch switches to using virSecurityManagerSetChildProcessLabel(),
which is called prior to virCommandRun() (rather than being called
*during* virCommandrun() by the hook function), and doesn't set the
UID/GID/security label directly, but instead merely informs virCommand
what it should set them all to when the time is appropriate.

This lets virCommand choose to do the uid/gid and caps dropping all at
the same time if it wants (it does *want* to, but isn't doing so yet;
that's for an upcoming patch).

Setting the uid/gid of the child process was the only thing done by
the hook function in this case, and that can now be done more simply
with virCommandSetUID/GID.

With the majority of fields in the virQEMUDriverPtr struct
now immutable or self-locking, there is no need for practically
any methods to be using the QEMU driver lock. Only a handful
of helper APIs in qemu_conf.c now need it

The hook scripts used by virCommand must be careful wrt
accessing any mutexes that may have been held by other
threads in the parent process. With the recent refactoring
there are 2 potential flaws lurking, which will become real
deadlock bugs once the global QEMU driver lock is removed.

Remove use of the QEMU driver lock from the hook function
by passing in the 'virQEMUDriverConfigPtr' instance directly.

Add functions to the virSecurityManager to be invoked before
and after fork, to ensure the mutex is held by the current
thread. This allows it to be safely used in the hook script
in the child process.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Currently the APIs for managing the shared disk list take
a virHashTablePtr as the primary argument. This is bad
because it requires the caller to deal with locking of
the QEMU driver. Switch the APIs to take the full
virQEMUDriverPtr instance
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Add locking to virSecurityManagerXXX APIs, so that use of the
security drivers is internally serialized. This avoids the need
to rely on the global driver locks to achieve serialization
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

To enable locking to be introduced to the security manager
objects later, turn virSecurityManager into a virObjectLockable
class
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

From qemu's point of view these are still just tap devices, so there's
no reason they shouldn't work with vhost-net; as a matter of fact,
Raja Sivaramakrishnan <srajag00@yahoo.com> verified on libvir-list
that at least the qemu_command.c part of this patch works:

  https://www.redhat.com/archives/libvir-list/2012-December/msg01314.html

(the hotplug case is extrapolation on my part).

The 'driver->caps' pointer can be changed on the fly. Accessing
it currently requires the global driver lock. Isolate this
access in a single helper, so a future patch can relax the
locking constraints.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

To avoid confusion between 'virCapsPtr' and 'qemuCapsPtr'
do some renaming of various fucntions/variables. All
instances of 'qemuCapsPtr' are renamed to 'qemuCaps'. To
avoid that clashing with the 'qemuCaps' typedef though,
rename the latter to virQEMUCaps.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

To enable virCapabilities instances to be reference counted,
turn it into a virObject. All cases of virCapabilitiesFree
turn into virObjectUnref
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

The virCgroupPtr instance APIs are safe to use without locking
in the QEMU driver, since all internal state they rely on is
immutable. Update the comment to reflect this.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

We are wrapping it in ignore_value() anyway.

We are requesting for stderr catching for all cases in
virFileWrapperFdNew(). There is no need to have a separate
function just to report an error, esp. when we can do it in
virFileWrapperFdClose().

The qemuParseGlusterString() replaced dst->src without a VIR_FREE() of
what was in there before.

The qemuBuildCommandLine() did not properly free the boot_buf depending
on various usages.

The qemuParseCommandLineDisk() had numerous paths that didn't clean up
the virDomainDiskDefPtr def properly. Adjust the logic to go through an
error: label before cleanup in order to free the resource.

Annotate the fields in virQEMUDriverPtr to indicate the locking
rules for their use
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Currently the activePciHostdevs, inactivePciHostdevsd and
activeUsbHostdevs lists are all implicitly protected by the
QEMU driver lock. Now that the lists all inherit from the
virObjectLockable, we can make the locking explicit, removing
the dependency on the QEMU driver lock for correctness.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

To allow modifications to the lists to be synchronized, convert
virPCIDeviceList and virUSBDeviceList into virObjectLockable
classes. The locking, however, will not be self-contained. The
users of these classes will have to call virObjectLock/Unlock
in the critical regions.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Rename all the usbDeviceXXX and usbXXXDevice APIs to have a
fixed virUSBDevice name prefix

When iterating over USB host devices to setup cgroups, the
usbDevice object was leaked in both LXC and QEMU driers
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Rename all the pciDeviceXXX and pciXXXDevice APIs to have a
fixed virPCIDevice name prefix

The QEMU driver struct has a 'qemuVersion' field that was previously
used to cache the version lookup from capabilities. With the recent
QEMU capabilities rewrite the caching happens at a lower level so
this field is pointless. Removing it avoids worries about locking
when updating it.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Use atomic ops to increment nextvmid and encapsulate it in a
method to prevent accidental non-atomic access

The duplicate VM checking should be done atomically with
virDomainObjListAdd, so shoud not be a separate function.
Instead just use flags to indicate what kind of checks are
required.

This pair, used in virDomainCreateXML:

   if (virDomainObjListIsDuplicate(privconn->domains, def, 1) < 0)
     goto cleanup;
   if (!(dom = virDomainObjListAdd(privconn->domains,
                                   privconn->caps,
                                   def, false)))
     goto cleanup;

Changes to

   if (!(dom = virDomainObjListAdd(privconn->domains,
                                   privconn->caps,
                                   def,
                                   VIR_DOMAIN_OBJ_LIST_ADD_CHECK_LIVE,
                                   NULL)))
     goto cleanup;

This pair, used in virDomainRestoreFlags:

   if (virDomainObjListIsDuplicate(privconn->domains, def, 1) < 0)
     goto cleanup;
   if (!(dom = virDomainObjListAdd(privconn->domains,
                                   privconn->caps,
                                   def, true)))
     goto cleanup;

Changes to

   if (!(dom = virDomainObjListAdd(privconn->domains,
                                   privconn->caps,
                                   def,
                                   VIR_DOMAIN_OBJ_LIST_ADD_LIVE |
                                   VIR_DOMAIN_OBJ_LIST_ADD_CHECK_LIVE,
                                   NULL)))
     goto cleanup;

This pair, used in virDomainDefineXML:

   if (virDomainObjListIsDuplicate(privconn->domains, def, 0) < 0)
     goto cleanup;
   if (!(dom = virDomainObjListAdd(privconn->domains,
                                   privconn->caps,
                                   def, false)))
     goto cleanup;

Changes to

   if (!(dom = virDomainObjListAdd(privconn->domains,
                                   privconn->caps,
                                   def,
                                   0, NULL)))
     goto cleanup;

Otherwise, we get a lot of scary (but harmless) noise in the logs:

2013-02-05 15:35:48.555+0000: 8637: error : qemuMonitorJSONCheckError:353 : internal error unable to execute QEMU command 'add-fd': Parameter 'fdset-id' expects an existing fdset-id

one for every qemu 1.2 binary that we probe.

* src/qemu/qemu_monitor_json.c (qemuMonitorJSONAddFd): During
probe, avoid logging failures.

As a step towards making virDomainObjList thread-safe turn it
into an opaque virObject, preventing any direct access to its
internals.

As part of this a new method virDomainObjListForEach is
introduced to replace all existing usage of virHashForEach

The APIs names for accessing the domain list object are
very inconsistent. Rename them all to have a standard
virDomainObjList prefix.

Currently the virQEMUDriverPtr struct contains an wide variety
of data with varying access needs. Move all the static config
data into a dedicated virQEMUDriverConfigPtr object. The only
locking requirement is to hold the driver lock, while obtaining
an instance of virQEMUDriverConfigPtr. Once a reference is held
on the config object, it can be used completely lockless since
it is immutable.

NB, not all APIs correctly hold the driver lock while getting
a reference to the config object in this patch. This is safe
for now since the config is never updated on the fly. Later
patches will address this fully.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

If a compression binary prints something to stderr, currently
it is discarded. However, it can contain useful data from
debugging POV, so we should catch it.

If a decompression binary prints something to stderr, currently
it is discarded. However, it can contain useful data from
debugging POV, so we should catch it.

Add support for QEMU -add-fd command line parameter detection.
This intentionally rejects qemu 1.2, where 'add-fd' QMP did
not allow full control of set ids, and where there was no command
line counterpart, but accepts qemu 1.3.
Signed-off-by: NEric Blake <eblake@redhat.com>

Add entry points for calling the qemu 'add-fd' and 'remove-fd'
monitor commands.  There is no entry point for 'query-fdsets';
the assumption is that a developer can use
 virsh qemu-monitor-command domain '{"execute":"query-fdsets"}'
when debugging issues, and that meanwhile, libvirt is responsible
enough to remember what fds it associated with what fdsets.
Likewise, on the 'add-fd' command, it is assumed that libvirt
will always pass a set id, rather than letting qemu autogenerate
the next available id number.

* src/qemu/qemu_monitor.c (qemuMonitorAddFd, qemuMonitorRemoveFd):
New functions.
* src/qemu/qemu_monitor.h (qemuMonitorAddFd, qemuMonitorRemoveFd):
New prototypes.
* src/qemu/qemu_monitor_json.c (qemuMonitorJSONAddFd)
(qemuMonitorJSONRemoveFd): New functions.
* src/qemu/qemu_monitor_json.h (qemuMonitorJSONAddFd)
(qemuMonitorJSONRemoveFd): New prototypes.

https://bugzilla.redhat.com/show_bug.cgi?id=894723

Currently, if qemuProcessStart() succeeds, but it's decompression
binary that returns nonzero status, we don't kill the qemu process,
but remove it from internal domain list, leaving the qemu process
hanging around totally uncontrolled.

https://bugzilla.redhat.com/show_bug.cgi?id=892289

It seems like with new udev within guest OS, the tray is locked,
so we need to:
- 'eject'
- wait for tray to open
- 'change'

Moreover, even when doing bare 'eject', we should check for
'tray_open' as guest may have locked the tray. However, the
waiting phase shouldn't be unbounded, so I've chosen 10 retries
maximum, each per 500ms. This should give enough time for guest
to eject a media and open the tray.