Use the new accessor APIs for storage_driver and test_driver.

Use the new accessor APIs for storage_driver, test_driver, and
gluster backend.

Use the new accessor API for storage_driver.

Use the new accessor APIs for storage_driver and test_driver.

Introduce virStoragePoolObjForEachVolume to scan each volume
calling the passed callback function until all volumes have been
processed in the storage pool volume list, unless the callback
function returns an error.

Introduce virStoragePoolObjSearchVolume to search each volume
calling the passed callback function until it returns true
indicating that the desired volume was found.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

Create/use virStoragePoolObjAddVol in order to add volumes onto list.

Create/use virStoragePoolObjRemoveVol in order to remove volumes from list.

Create/use virStoragePoolObjGetVolumesCount to get count of volumes on list.

For the storage driver, the logic alters when the volumes.obj list grows
to after we've fetched the volobj. This is an optimization of sorts, but
also doesn't "needlessly" grow the volumes.objs list and then just decr
the count if the virGetStorageVol fails.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

It's a bool not an int, so use true/false and not 1/0

Create/use a helper to perform object allocation.

Adjust storagevolxml2argvtest.c in order to use the allocator and
setting of the obj->def.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

In preparation for making a private object, create accessor API's for
consumer storage functions to use:

    virStoragePoolObjGetDef
    virStoragePoolObjSetDef
    virStoragePoolObjGetNewDef
    virStoragePoolObjDefUseNewDef
    virStoragePoolObjGetConfigFile
    virStoragePoolObjSetConfigFile
    virStoragePoolObjGetAutostartLink
    virStoragePoolObjIsActive
    virStoragePoolObjSetActive
    virStoragePoolObjIsAutostart
    virStoragePoolObjSetAutostart
    virStoragePoolObjGetAsyncjobs
    virStoragePoolObjIncrAsyncjobs
    virStoragePoolObjDecrAsyncjobs
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

So we refer to the terms 'persistent' and 'transient' across the whole
man page, without describing it further, but more importantly, how the
create command affects it, i.e. explicitly stating that domain created
via the 'create' command are going to be transient or persistent,
depending on whether there is an existing persistent domain with a
matching <name> and <uuid>, in which case it will remain persistent, but
will run using a one-time configuration, otherwise it's going to be
transient and will vanish once destroyed.
Signed-off-by: NErik Skultety <eskultet@redhat.com>

We only need to zero-out bytes that will be written.
May be we even don't need to zero-out at all because
of immediate truncate.

Make alignment of last direct write more straightforward. Using
additionally two flags 'end' and 'shortRead' looks complicated.

Things moved again, sigh.
Reviewed-By: NJamie Strandboge <jamie@canonical.com>
Michal Privoznik <mprivozn@redhat.com>

Otherwise we fail to reconnect to /dev/net/tun opened by libvirtd
like

    [ 8144.507756] audit: type=1400 audit(1505488162.386:38069121): apparmor="DENIED" operation="file_perm" info="Failed name lookup - disconnected path" error=-13 profile="libvirt-5dfcc8a7-b79a-4fa9-a41f-f6271651934c" name="dev/net/tun" pid=9607 comm="qemu-system-x86" requested_mask="r" denied_mask="r" fsuid=117 ouid=0
Reviewed-By: NJamie Strandboge <jamie@canonical.com>
Acked-By: NMichal Privoznik <mprivozn@redhat.com>

Available since QEMU 2.10.0 (specifically commit
v2.9.0-2233-g53f9a6f45f).
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>
Reviewed-by: NPavel Hrdina <phrdina@redhat.com>

The features were added to QEMU by commit v2.4.0-1690-gf7fda28094 as
Skylake Server features.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>
Reviewed-by: NPavel Hrdina <phrdina@redhat.com>

Signed-off-by: NJiri Denemark <jdenemar@redhat.com>
Reviewed-by: NPavel Hrdina <phrdina@redhat.com>

Adding functionality to libvirt that will allow querying the interface
for the availability of switchdev Offloading NIC capabilities.

The switchdev mode was introduced in kernel 4.8, the iproute2-devlink
command to retrieve the switchdev NIC feature with command example:

    devlink dev eswitch show pci/0000:03:00.0

This feature is needed for Openstack so we can do a scheduling decision
if the NIC is in Hardware Offload (switchdev) or regular SR-IOV (legacy) mode.
And select the appropriate hypervisors with the requested capability see [1].

[1] - https://specs.openstack.org/openstack/nova-specs/specs/pike/approved/enable-sriov-nic-features.htmlReviewed-by: NLaine Stump <laine@laine.org>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

https://bugzilla.redhat.com/show_bug.cgi?id=1075520

Apart from generic checks, we need to constrain netmask/prefix
length a bit. Thing is, with current implementation QEMU needs to
be able to 'assign' some IP addresses to the virtual network. For
instance, the default gateway is at x.x.x.2, dns is at x.x.x.3,
the default DHCP range is x.x.x.15-x.x.x.30. Since we don't
expose these settings yet, it's safer to require shorter prefix
to have room for the defaults.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: laine@laine.org

https://bugzilla.redhat.com/show_bug.cgi?id=1075520

Currently, all that users can specify for an interface type of
'user' is the common attributes: PCI address, NIC model (and
that's basically it). However, some need to configure other
address range than the default one.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: laine@laine.org

The function checks whether all CPU features used in a CPU definition
are specified in cpu_map.xml.

https://bugzilla.redhat.com/show_bug.cgi?id=1460086Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

Only feature policy is checked on s390, which was previously done in
virCPUUpdate, but that's not the correct place for the check once we
have virCPUValidateFeatures.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

This new API may be used to check whether all features used in a CPU
definition are valid (e.g., libvirt knows their name, their policy is
supported, etc.). Leaving this API unimplemented in an arch subdriver
means libvirt does not restrict CPU features usable on the associated
architectures.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

The host CPU definitions reported in the capabilities XML may contain
CPU features unknown to QEMU, but the result of virConnectBaselineCPU is
supposed to be directly usable as a guest CPU definition and thus it
should only contain features QEMU knows about.

https://bugzilla.redhat.com/show_bug.cgi?id=1450317Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

The filter only needs to know the CPU architecture. Passing
virQEMUCapsPtr as opaque is a bit overkill.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

The implementation of virConnectBaselineCPU may be different for each
hypervisor. Thus it shouldn't really be implmented in the cpu code.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

They are logged in cpuBaseline anyway.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

For parsing a list of CPU XMLs into a NULL-terminated list of CPU defs.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

https://bugzilla.redhat.com/show_bug.cgi?id=1373783Signed-off-by: NJiri Denemark <jdenemar@redhat.com>
Reviewed-by: NPavel Hrdina <phrdina@redhat.com>

The macro needs to be defined closer to its usage

This is required by the fedora packaging guidelines:

https://fedoraproject.org/wiki/Packaging:LicensingGuidelines

This macro isn't available on stock RHEL6 so provide a backcompat
definition

https://bugzilla.redhat.com/show_bug.cgi?id=1483293Reported-by: NVille Skyttä <ville.skytta@iki.fi>

Owning all created directories is a requirement of the Fedora
packaging guidelines

https://bugzilla.redhat.com/show_bug.cgi?id=1483293Signed-off-by: NCole Robinson <crobinso@redhat.com>

Luckily it only returns 0 or -1

Commit id 'e02ff020' neglected to use the attrBuf and childBuf
in the virDomainDiskSourceFormatNetwork call.

So make the necessary alterations to allow usage.

Rather than checking during XML processing, move the check for
valid <encryption> into virDomainDiskDefParseValidate and alter
the text of the message slightly to be a bit more correct.