The QEMU hotunplug code for PCI devices was looking at host
devices in the guest config without first filtering non
PCI devices. This means it was reading garbage

* src/qemu/qemu_driver.c: Filter out non-PCI devices

Commit 3c12a67b added
a dependency on the NFS_SUPER_MAGIC macro, which is
defined in linux/magic.h.  Unfortunately linux/magic.h
is not available in RHEL-5, and causes a compile error.
Just define it locally, since this is something that
can't change.
Signed-off-by: NChris Lalancette <clalance@redhat.com>

Move *all* file operations related to creation and writing of libvirt
header to the domain save file into a hook function that is called by
virFileOperation. First try to call virFileOperation as root. If that
fails with EACCESS, and (in the case of Linux) statfs says that we're
trying to save the file on an NFS share, rerun virFileOperation,
telling it to fork a child process and setuid to the qemu user. This
is the only way we can successfully create a file on a root-squashed
NFS server.

This patch (along with setting dynamic_ownership=0 in qemu.conf)
makes qemudDomainSave work on root-squashed NFS.

* src/qemu/qemu_driver.c: provide new qemudDomainSaveFileOpHook()
  utility, use it in qemudDomainSave() if normal creation of the
  file as root failed, and after checking the filesystem type for
  the storage is NFS. In that case we also bypass the security
  driver, as this would fail on NFS.

If qemudDomainRestore fails to open the domain save file, create a
pipe, then fork a process that does setuid(qemu_user) and opens the
file, then reads this file and stuffs it into the pipe. the parent
libvirtd process will use the other end of the pipe as its fd, then
reap the child process after it's done reading.

This makes domain restore work on a root-squash NFS share that is only
visible to the qemu user.

* src/qemu/qemu_driver.c: add new qemudOpenAsUID() helper function,
  and use it in qemudDomainRestore() if reading as root directly failed.

The USB/PCI device hotplug code for the QEMU driver was forgetting
to allocate a unique device alias.

* src/qemu/qemu_driver.c: Fill in device alias for USB/PCI devices

When a VM save attempt failed, the VM would be left in a paused
state. It is neccessary to resume CPU execution upon failure
if it was running originally

* src/qemu/qemu_driver.c: Resume CPUs upon save failure

This supports cancellation of jobs for the QEMU driver against
the virDomainMigrate, virDomainSave and virDomainCoreDump APIs.
It is not yet supported for the virDomainRestore API, although
it is desirable.

* src/qemu/qemu_driver.c: Issue 'migrate_cancel' command if
  virDomainAbortJob is issued during a migration operation
* tools/virsh.c: Add a domjobabort command

This provides the internal glue for the driver API

* src/driver.h: Internal API contract
* src/libvirt.c, src/libvirt_public.syms: Connect public API
  to driver API
* src/esx/esx_driver.c, src/lxc/lxc_driver.c, src/opennebula/one_driver.c,
  src/openvz/openvz_driver.c, src/phyp/phyp_driver.c,
  src/qemu/qemu_driver.c, src/remote/remote_driver.c,
  src/test/test_driver.c src/uml/uml_driver.c, src/vbox/vbox_tmpl.c,
  src/xen/xen_driver.c: Stub out entry points

Introduce support for  virDomainGetJobInfo in the QEMU driver. This
allows for monitoring of any API that uses the 'info migrate' monitor
command. ie virDomainMigrate, virDomainSave and virDomainCoreDump

Unfortunately QEMU does not provide a way to monitor incoming migration
so we can't wire up virDomainRestore yet.

The virsh tool gets a new command 'domjobinfo' to query status

* src/qemu/qemu_driver.c: Record virDomainJobInfo and start time
  in qemuDomainObjPrivatePtr objects. Add generic shared handler
  for calling 'info migrate' with all migration based APIs.
* src/qemu/qemu_monitor_text.c: Fix parsing of 'info migration' reply
* tools/virsh.c: add new 'domjobinfo' command to query progress

The internal glue layer for the new pubic API

* src/driver.h: Define internal driver API contract
* src/libvirt.c, src/libvirt_public.syms: Wire up public
  API to internal driver API
* src/esx/esx_driver.c, src/lxc/lxc_driver.c, src/opennebula/one_driver.c,
  src/openvz/openvz_driver.c, src/phyp/phyp_driver.c,
  src/qemu/qemu_driver.c, src/remote/remote_driver.c,
  src/test/test_driver.c, src/uml/uml_driver.c, src/vbox/vbox_tmpl.c,
  src/xen/xen_driver.c: Stub new entry point

The USB hotplug method was mistakenly generating a PCI address
string

* src/qemu/qemu_driver.c: Fix USB hotplug device string

when the underlying qemu supports the drive/device model and the
controller has been added this way.
* src/qemu/qemu_driver.c: use qemuMonitorDelDevice() when detaching
  PCI controller and if supported
* src/qemu/qemu_monitor.[ch]: add new qemuMonitorDelDevice() function
* src/qemu/qemu_monitor_json.[ch]: JSON backend for DelDevice command
* src/qemu/qemu_monitor_text.[ch]: Text backend for DelDevice command

* src/qemu/qemu_driver.c: in qemudDomainDetachPciControllerDevice()
  when a controller is not present in the system anymore, the PCI
  address must be deleted from libvirt's hashtable because it can
  be re-used for other purposes.

* src/qemu/qemu_driver.c: in qemudDomainAttachDevice(), one must not
  delete the data part when the operation succeeds because it is
  required later on. The correct pattern to handlethe parsed
  representation of the device information on success
  is dev->data.controller = NULL; virDomainDeviceDefFree(dev);,
  which leaves the structure pointed at by data in memory.

If the hostname as returned by "gethostname" resolves
to "localhost" (as it does with the broken Fedora-12
installer), then live migration will fail because the
source will try to migrate to itself.  Detect this
situation up-front and abort the live migration before
we do any real work.

* src/util/util.h src/util/util.c: add a new virGetHostnameLocalhost
  with an optional localhost check, and rewire virGetHostname() to use
  it
* src/libvirt_private.syms: expose the new function
* src/qemu/qemu_driver.c: use it in qemudDomainMigratePrepare2()

This patch adds the mac_filter support to the macvtap device.

This patch sets or unsets the IFF_VNET_HDR flag depending on what device
is used in the VM. The manipulation of the flag is done in the open
function and is only fatal if the IFF_VNET_HDR flag could not be cleared
although it has to be (or if an ioctl generally fails). In that case the
macvtap tap is closed again and the macvtap interface torn.

* src/qemu/qemu_conf.c src/qemu/qemu_conf.h: pass qemuCmdFlags to
  qemudPhysIfaceConnect()
* src/util/macvtap.c src/util/macvtap.h: add vnet_hdr boolean to
  openMacvtapTap(), and private function configMacvtapTap()
* src/qemu/qemu_driver.c: add extra qemuCmdFlags when calling
  qemudPhysIfaceConnect()

* src/qemu/qemu_driver.c: qemudStartVMDaemon() fix typo in comment

Rework and simplification of teardown of the macvtap device.

Basically all devices with the same MAC address and link device are kept
alive and not attempted to be torn down. If a macvtap device linked to a
physical interface with a certain MAC address 'M' is to be created it
will automatically fail if the interface is 'up'ed and another macvtap
with the same properties (MAC addr 'M', link dev) happens to be 'up'.
This will prevent the VM from starting or the device from being attached
to a running VM. Stale interfaces are assumed to be there for some
reason and not stem from libvirt.

In the VM shutdown path, it's assuming that an interface name is always
available so that if the device type is DIRECT it can be torn down
using its name.

* src/util/macvtap.h src/libvirt_macvtap.syms: change of deleting routine
* src/util/macvtap.c: cleanups and change of deleting routine
* src/qemu/qemu_driver.c: change cleanup on shutdown
* src/qemu/qemu_conf.c: don't delete Macvtap in qemudPhysIfaceConnect()

* src/qemu/qemu_driver.c (qemuInitPasswords): Free pass-phrase buffer.

Similar to the Set*Mem commands, this implementation was bogus and
misleading. Make it clear this is a hotplug only operation, and that the
hotplug piece isn't even implemented.

Also drop the overkill maxvcpus validation: we don't perform this check
at XML define time so clearly no one is missing it, and there is
always the risk that our info will be out of date, possibly preventing
legitimate CPU values.
Signed-off-by: NCole Robinson <crobinso@redhat.com>

SetMem and SetMaxMem are hotplug only APIs, any persistent config
changes are supposed to go via XML definition. The original implementation
of these calls were incorrect and had the nasty side effect of making
a psuedo persistent change that would be lost after libvirtd restart
(I didn't know any better).

Fix these APIs to rightly reject non running domains.
Signed-off-by: NCole Robinson <crobinso@redhat.com>

When in JSON mode, QEMU requires that 'qmp_capabilities' is run as
the first command in the monitor. This is a no-op when run in the
text mode monitor

* src/qemu/qemu_driver.c: Run capabilities negotiation when
  connecting to the monitor
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h,
  src/qemu/qemu_monitor_json.c, src/qemu/qemu_monitor_json.h: Add
  support for the 'qmp_capabilities' command, no-op in text mode.

This part adds support for qemu making a macvtap tap device available
via file descriptor passed to qemu command line. This also attempts to
tear down the macvtap device when a VM terminates. This includes support
for attachment and detachment to/from running VM.
* src/qemu/qemu_conf.[ch] src/qemu/qemu_driver.c: add support in the
  QEmu driver

Current PCI addresses are allocated at time of VM startup.
To make them truely persistent, it is neccessary to do this
at time of virDomainDefine/virDomainCreate. The code in
qemuStartVMDaemon still remains in order to cope with upgrades
from older libvirt releases

* src/qemu/qemu_driver.c: Rename existing qemuAssignPCIAddresses
  to qemuDetectPCIAddresses. Add new qemuAssignPCIAddresses which
  does auto-allocation upfront. Call qemuAssignPCIAddresses from
  qemuDomainDefine and qemuDomainCreate to assign PCI addresses that
  can then be persisted. Don't clear PCI addresses at shutdown if
  they are intended to be persistent

The old text mode monitor prompts for a password when disks are
encrypted. This interactive approach doesn't work for JSON mode
monitor. Thus there is a new 'block_passwd' command that can be
used.

* src/qemu/qemu_driver.c: Split out code for looking up a disk
  secret from findVolumeQcowPassphrase, into a new method
  getVolumeQcowPassphrase. Enhance qemuInitPasswords() to also
  set the disk encryption password via the monitor
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h,
  src/qemu/qemu_monitor_json.c, src/qemu/qemu_monitor_json.h,
  src/qemu/qemu_monitor_text.c, src/qemu/qemu_monitor_text.h: Add
  support for the 'block_passwd' monitor command.

Since c26cb923, the dname
parameter has been ignored by these two functions.  Use it.
* src/qemu/qemu_driver.c (qemudDomainMigratePrepareTunnel): Honor dname
parameter once again.
(qemudDomainMigratePrepare2): Likewise.

Currently the timeout for reading startup output is 3 seconds. If the
host is under any sort of load, we can easily trigger this. Lets bump
it to 30 seconds.

Since the polling loop checks to see if the process has died, we shouldn't
erroneously hit this timeout if qemu bombs (only if it is stuck in some
infinite loop).

The timeout errors were unconditionally being overwritten by the less
helpful 'unable to start guest' error.

The virConnectPtr is no longer required for error reporting since
that is recorded in a thread local. Remove use of virConnectPtr
from all APIs in cpu_conf.{h,c} and update all callers to
match

The virConnectPtr is no longer required for error reporting since
that is recorded in a thread local. Remove use of virConnectPtr
from all APIs in node_device_conf.{h,c} and update all callers to
match

The QEMU flags are commonly stored as a signed or unsigned int,
allowing only 31 flags. This limit is rather close, so to aid
future patches, change it to a 64-bit int

* src/qemu/qemu_conf.c, src/qemu/qemu_conf.h, src/qemu/qemu_driver.c,
  tests/qemuargv2xmltest.c, tests/qemuhelptest.c, tests/qemuxml2argvtest.c:
  Use 'unsigned long long' for QEMU flags

The virConnectPtr is no longer required for error reporting since
that is recorded in a thread local. Remove use of virConnectPtr
from all APIs in security_driver.{h,c} and update all callers to
match

The security driver was mistakenly initialized before the QEMU
config file was loaded. This prevents it being turned off again.
The capabilities XML was also getting the wrong security driver
name, due to the stacked driver arrangement.

* src/qemu/qemu_driver.c: Fix initialization order and capabilities
  model name

It was used for error reporting only.