Tests which are using the QEMU monitor / agent need to have an
event thread running a private GMainContext.

There is already a thread running the main libvirt event loop
but this can't be eliminated yet as it is used for more than
just the monitor client I/O.
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>
Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>

In common with regular QEMU guests, the QMP probing
will need an event loop for handling monitor I/O
operations.
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>
Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>

The event loop thread will be responsible for handling
any per-domain I/O operations, most notably the QEMU
monitor and agent sockets.

We start this event loop when launching QEMU, but stopping
the event loop is a little more complicated. The obvious
idea is to stop it in qemuProcessStop(), but if we do that
we risk loosing the final events from the QEMU monitor, as
they might not have been read by the event thread at the
time we tell the thread to stop.

The solution is to delay shutdown of the event thread until
we have seen EOF from the QEMU monitor, and thus we know
there are no further events to process.

Note that this assumes that we don't have events to process
from the QEMU agent.
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>
Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>

We want a way to easily run a private GMainContext in a
thread, with correct synchronization between startup
and shutdown of the thread.
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>
Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>

The virbpf module wraps syscalls to BPF. However, if the kernel
headers used at the compile time don't have support for BPF the
module offers stubs which return a negative one to signal error
to the caller. But there is a slight discrepancy between real
functions and these stubs. While the former set errno and return
-1 the latter report an error (without setting the errno) and
return -1. This is not optimal because the caller might see stale
errno and overwrite the error message with a less accurate one.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NDaniel Henrique Barboza <danielhb413@gmail.com>

In the virCgroupV2DevicesAvailable() function we try to determine
whether CGroups version 2 are available. We do this by opening
what we believe is the CGroup mount point and issuing a BPF call.
When the call fails, a debug message is printed. However, the BPF
call sets errno too. Include it in the debug message to help us
with debugging.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NDaniel Henrique Barboza <danielhb413@gmail.com>

When rewriting the virDomainDiskTranslateSourcePool() function in
v6.1.0-rc1~184 a typo was introduced. Previously, we allowed
startup policy only for those volumes which translated to
VIR_STORAGE_TYPE_FILE. But starting with the referenced commit,
the value we checked for was changed to VIR_STORAGE_VOL_FILE
which comes from a different enum and has a different value too.
This is wrong, because virStorageSourceGetActualType() returns a
value from the original enum.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1811728Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NPeter Krempa <pkrempa@redhat.com>

Signed-off-by: NJiri Denemark <jdenemar@redhat.com>
Reviewed-by: NChristian Ehrhardt <christian.ehrhardt@canonical.com>

Use g_autoptr for the virCPUDef variables.
Signed-off-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>

Use g_autoptr for the virCPUDef variables and get rid
of the cleanup label.
Signed-off-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>

Use an autofree'd helper variable to store the socket path
and free it after the function finishes.
Signed-off-by: NJán Tomko <jtomko@redhat.com>
Fixes: 5b8569ddReviewed-by: NMichal Privoznik <mprivozn@redhat.com>

virCPUDefPtr uses refcounting internally and must be allocated
using virCPUDefNew, otherwise virCPUDefFree would be a no-op.
Signed-off-by: NJán Tomko <jtomko@redhat.com>
Fixes: fa2404bf
Fixes: eee09435Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>

Free the x86_64 schema before overwriting it with s390x schema.
Signed-off-by: NJán Tomko <jtomko@redhat.com>
Fixes: eee09435Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>

Add /usr/bin/* to -trace-children-skip
Signed-off-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>

When a type is registered, it holds allocated memory until
the program exits.

Add an exception to valgrind.supp to make the output of
  make -C tests valgrind
more readable.
Signed-off-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>

When preparing images for block jobs we modify their seclabels so
that QEMU can open them. However, as mentioned in the previous
commit, secdrivers base some it their decisions whether the image
they are working on is top of of the backing chain. Fortunately,
in places where we call secdrivers we know this and the
information can be passed to secdrivers.

The problem is the following: after the first blockcommit from
the base to one of the parents the XATTRs on the base image are
not cleared and therefore the second attempt to do another
blockcommit fails. This is caused by blockcommit code calling
qemuSecuritySetImageLabel() over the base image, possibly
multiple times (to ensure RW/RO access). A naive fix would be to
call the restore function. But this is not possible, because that
would deny QEMU the access to the base image.  Fortunately, we
can use the fact that seclabels are remembered only for the top
of the backing chain and not for the rest of the backing chain.
And thanks to the previous commit we can tell secdrivers which
images are top of the backing chain.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1803551Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NPeter Krempa <pkrempa@redhat.com>

Our decision whether to remember seclabel for a disk image
depends on a few factors. If the image is readonly or shared or
not the chain top the remembering is suppressed for the image.
However, the virSecurityManagerSetImageLabel() is too low level
to determine whether passed @src is chain top or not. Even though
the function has the @parent argument it does not necessarily
reflect the chain top - it only points to the top level image in
the chain we want to relabel and not to the topmost image of the
whole chain. And this can't be derived from the passed domain
definition reliably neither - in some cases (like snapshots or
block copy) the @src is added to the definition only after the
operation succeeded. Therefore, introduce a flag which callers
can use to help us with the decision.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NPeter Krempa <pkrempa@redhat.com>

If only IPv6 is configured on the host, getaddrinfo with AI_ADDRCONFIG
in hints would return EAI_ADDRFAMILY for nodenames that resolve to IPv4.

Also pass AI_V4MAPPED to accept IPv4-mapped addresses on IPv6-only
systems.
Signed-off-by: NZhimin Feng <fengzhimin1@huawei.com>
[rewrote the commit message - jtomko]
Signed-off-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NDaniel P. Berrangé <berrange@redhat.com>

This is the same timeout of all other daemons, and just like them
virtlogd is socket-activated, so it will automatically be started
on demand whenever that's necessary.
Signed-off-by: NAndrea Bolognani <abologna@redhat.com>
Reviewed-by: NDaniel Henrique Barboza <danielhb413@gmail.com>

In the following recent change:

  commit db728663
  Author: Daniel P. Berrangé <berrange@redhat.com>
  Date:   Tue Jan 14 10:40:52 2020 +0000

    util: add API for reading password from the console

the fact that "bufptr" pointer may point to either heap or stack
allocated data was overlooked. As a result, when the strdup was
removed, we ended up returning a pointer to the local stack to
the caller. When the caller referenced this stack pointer they
got out garbage which fairly quickly resulted in a crash.

We need to copy the stack buffer into heap memory in the username
case.
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>
Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>

Signed-off-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NDaniel Henrique Barboza <danielhb413@gmail.com>

Virtualization event types were added in 2.0.5:
https://github.com/linux-audit/audit-userspace/commit/3755e9ff

Even Ubuntu 14.04 (which we don't support) has 2.3.2.
Signed-off-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NDaniel Henrique Barboza <danielhb413@gmail.com>

When spawning a thread via our virThread APIs we let pthread
spawn this helper thread which sets couple of thread local
variables (e.g. thread job name or thread worker name) and as of
v6.1.0-40-gc85256b3 it also sets pthread name (which is then
visible in `ps' output for instance). Only after these steps the
intended function is called. However, just before calling it we
free the buffer that holds the thread name which results in
invalid memory reads:

==47027== Invalid read of size 1
==47027==    at 0x48389C2: strlen (vg_replace_strmem.c:459)
==47027==    by 0x58BB3D6: __vfprintf_internal (vfprintf-internal.c:1645)
==47027==    by 0x58CE6E0: __vasprintf_internal (vasprintf.c:57)
==47027==    by 0x574BA28: g_vasprintf (in /usr/lib64/libglib-2.0.so.0.6000.7)
==47027==    by 0x57240CC: g_strdup_vprintf (in /usr/lib64/libglib-2.0.so.0.6000.7)
==47027==    by 0x48E0EFA: vir_g_strdup_vprintf (glibcompat.c:209)
==47027==    by 0x493AA05: virLogVMessage (virlog.c:573)
==47027==    by 0x493A8FE: virLogMessage (virlog.c:513)
==47027==    by 0x4992FC7: virThreadJobClear (virthreadjob.c:121)
==47027==    by 0x4992844: virThreadHelper (virthread.c:237)
==47027==    by 0x5817496: start_thread (pthread_create.c:486)
==47027==    by 0x59563CE: clone (clone.S:95)

The problem is that neither virThreadJobSetWorker() nor
virThreadJobSet() create a copy of passed name. They just set a
thread local variable to point to the buffer which is then
freed. Moving the free towards the end of the wrapper function
solves the issue.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NDaniel P. Berrangé <berrange@redhat.com>

The 'auths' struct in the test driver was not free()d. This was easy to
miss because the default XML doesn't include auth info.
Reviewed-by: NDaniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>

'template' might be used uninitialized.

Use g_autofree for everything and remove all the custom labels.
Signed-off-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NPeter Krempa <pkrempa@redhat.com>

Convert the function to use g_autofree to silence -Wmaybe-uninitialized.
Signed-off-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NPeter Krempa <pkrempa@redhat.com>

Signed-off-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NPeter Krempa <pkrempa@redhat.com>

Now that we have more than just the libvirtd daemon, we should be
explaining to users what they are all for & important aspects of their
configuration.
Reviewed-by: NErik Skultety <eskultet@redhat.com>
Reviewed-by: NAndrea Bolognani <abologna@redhat.com>
Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>

Our implementation masks GCC warnings of uninitialized use of the passed
argument. After changing this I got a load of following warnings:

src/conf/virnetworkportdef.c: In function 'virNetworkPortDefSaveStatus':
/usr/include/glib-2.0/glib/gmem.h:136:8: error: 'path' may be used uninitialized in this function [-Werror=maybe-uninitialized]
  136 |     if (_p)                \
      |        ^
src/conf/virnetworkportdef.c:447:11: note: 'path' was declared here
  447 |     char *path;
      |           ^~~~

For the curious, g_clear_pointer is still safe for arguments with
side-effect. Here's the pre-processed output of trying to do a
VIR_FREE(*(test2++)):

 do {
     typedef char _GStaticAssertCompileTimeAssertion_1[(sizeof *(&(*(test2++))) == sizeof (gpointer)) ? 1 : -1] __attribute__((__unused__));
     __typeof__((&(*(test2++)))) _pp = (&(*(test2++)));
     __typeof__(*(&(*(test2++)))) _ptr = *_pp;

     *_pp = ((void *)0);
     if (_ptr)
        (g_free) (_ptr);
 } while (0) ;
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Refactor the cleanup control flow and use g_autofree for 'arch' so that
it's mandated that it's initialized.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Use 'g_autoptr' which mandates initialization for 'hostname' and also
for 'domain' to allow full refactor of the cleanup path.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

'path' could be accessed uninitialized. Fix it by using g_autofree which
also mandates initialization.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Use 'g_autofree' to clean both 'path' and 'xml' which mandates
initialization and get rid of the 'cleanup' label and 'ret variable.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

On FreeBSD the non-portable pthread APIs need to be obtained
via the pthread_np.h header.
Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>

Historically threads are given a name based on the C function,
and this name is just used inside libvirt. With OS level thread
naming this name is now visible to debuggers, but also has to
fit in 15 characters on Linux, so function names are too long
in some cases.
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>
Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>

Setting the thread name makes it easier to debug libvirtd
when many threads are running.
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>
Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>

The qemuMonitorOpenFD method has not been used since it
was first introduced.
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>
Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>

Libvirt has never configured the QEMU agent to support
running on a PTY implicitly. In theory an end user may
have written such an XML config, but this is reasonably
unlikely since when a bare <channel> is provided, libvirt
will auto-expand it to a UNIX socket backend.

With this change a user who has use the PTY backend will
have to switch to the UNIX backend if they wish to use
libvirt APIs for interacting with the agent. This will
not have guest ABI impact.
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>
Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>

Use the new command in the test suite by asserting the capability
and adjusting test data to the correct field names as they changed
compared to 'query-cpus'.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NDaniel Henrique Barboza <danielhb413@gmail.com>

qemuMonitorJSONMakeCommandInternal does the full command construction if
you pass in what would become the value of the 'arguments' key. Refactor
the open-coded implementation to use the helper and use modern cleanup
helpers at the same time.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NDaniel Henrique Barboza <danielhb413@gmail.com>