Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

This fixes a possible double free. In virNetworkAssignDef() if
virBitmapNew() fails, then virNetworkObjFree(network) is called.
However, with network->def pointing to actual @def. So if caller
frees @def again, ...

Moreover, this fixes one possible memory leak too. In
virInterfaceAssignDef() if appending to the list of interfaces
fails, we ought to call virInterfaceObjFree() instead of bare
VIR_FREE().

Although, in order to do that some array size variables needs
to be turned into size_t rather than int.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

The nwfilter conf update mutex previously serialized
updates to the internal data structures for firewall
rules, and updates to the firewall itself. The latter
was recently turned into a read/write lock, and filter
instantiation allowed to proceed in parallel. It was
believed that this was ok, since each filter is created
on a separate iptables/ebtables chain.

It turns out that there is a subtle lock ordering problem
on virNWFilterObjPtr instances. __virNWFilterInstantiateFilter
will hold a lock on the virNWFilterObjPtr it is instantiating.
This in turn invokes virNWFilterInstantiate which then invokes
virNWFilterDetermineMissingVarsRec which then invokes
virNWFilterObjFindByName. This iterates over every single
virNWFilterObjPtr in the list, locking them and checking their
name. So if 2 or more threads try to instantiate a filter in
parallel, they'll all hold 1 lock at the top level in the
__virNWFilterInstantiateFilter method which will cause the
other thread to deadlock in virNWFilterObjFindByName.

The fix is to add an exclusive mutex to serialize the
execution of __virNWFilterInstantiateFilter.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

vshRunConsole() uses virCondWait() which is a wrapper around
pthread_cond_wait(). On FreeBSD, pthread_cond_wait needs mutex to be
locked, otherwise it immediately fails with EPERM. On Linux, the
behaviour in this case is undefined.

So lock the mutex before calling virCondWait().

Man page, help output and also parsing is sorted in order to find
options smoothly.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

This resolves a Coverity RESOURCE_LEAK issue introduced by commit
id 'de6fa535' where the virSCSIDeviceSetUsedBy() didn't VIR_FREE
the 'copy' or possibly VIR_STRDUP()'d values.  It also ensures that
the VIR_APPEND_ELEMENT is successful...

Test it once with SELinux enabled and once with it disabled.
Signed-off-by: NMichael Chapman <mike@very.puzzling.org>

If SELinux is compiled into libvirt but it is disabled on the host,
libvirtd logs:

  error : virIdentityGetSystem:173 : Unable to lookup SELinux process
  context: Invalid argument

on each and every client connection.

Use is_selinux_enabled() to skip retrieval of the process's SELinux
context if SELinux is disabled.
Signed-off-by: NMichael Chapman <mike@very.puzzling.org>

With the previous commit's securityselinuxhelper enhancements, the
SELinux security manager can be tested even without SELinux enabled on
the test system.
Signed-off-by: NMichael Chapman <mike@very.puzzling.org>

Add fake implementations of:

- is_selinux_enabled
- security_disable
- selinux_virtual_domain_context_path
- selinux_virtual_image_context_path
- selinux_lxc_contexts_path
- selabel_open
- selabel_close
- selabel_lookup_raw

The selabel_* functions back onto the real implementations if SELinux is
enabled on the test system, otherwise we just implement a fake selabel
handle which errors out on all labelling lookups.

With these changes in place, securityselinuxtest and
securityselinuxlabeltest don't need to skip all tests if SELinux isn't
available; they can exercise much of the security manager code.
Signed-off-by: NMichael Chapman <mike@very.puzzling.org>

Libvirt tarball contains po/stamp-po file which prevents any po/*.gmo
file to be regenerated even if a corresponding po/*.po file is newer. By
removing the stamp-po file, all *.gmo files are properly updated if
required. This allows downstreams to provide patches that update
translations.

When domain is started with setting that cannot be done, i.e. those
that require cgroups, there is no error reported and it succeeds
without any message whatsoever.

When setting with API, virsh, an error is reported, but only due to
the fact that no cgroups are mounted (priv->cgroup == NULL).

Given the above it seems reasonable to reject such unsupported
settings.

This patch effectively changes the error message from:

$ virsh -c qemu:///session schedinfo dummy
Scheduler      : Unknown
error: Requested operation is not valid: cgroup CPU controller is not mounted

to:

$ virsh -c qemu:///session schedinfo dummy
Scheduler      : Unknown
error: Operation not supported: CPU tuning is not available in session mode

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1023366Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

As of commit 46ec5f85, the conn.lock mutex does not need to be held
when calling any vir*Dispose() function in datatypes.c (via virObjectUnref()).
Signed-off-by: NMichael Chapman <mike@very.puzzling.org>
Signed-off-by: NJán Tomko <jtomko@redhat.com>

Coverity spotted that 'nfdlist' (ssize_t) could be -1, but that we
were using 'i' (size_t) to iterate over the list at cleanup, with
crashing results because it promotes to a really big unsigned number.

* tools/virt-login-shell.c (main): Avoid treating -1 as unsigned.
Signed-off-by: NEric Blake <eblake@redhat.com>

configure check for character devices lock path calls
AC_DEFINE_UNQUOTED for VIR_CHRDEV_LOCK_FILE_PATH even if
$with_chrdev_lock_files = "no".

So the locking code in conf/virchrdev.c:

 #ifdef VIR_CHRDEV_LOCK_FILE_PATH

is compiled in even if it shouldn't, because VIR_CHRDEV_LOCK_FILE_PATH
is defined as "no", so it tries to create lock files with strange
lock path like 'no/LCK..'.

Fix that by calling AC_DEFINE_UNQUOTED only if $with_chrdev_lock_files
is not 'no'.

The qemuMonitorJSONBlockJob handles a few errors internally. If qemu
returns a different error we would report a rather unhelpful message:

 $ virsh blockpull gluster-job vda --base /dev/null
 error: internal error: Unexpected error

As the actual message from qemu contains a bit more info, let's use it
to report something a little more useful:

 $ virsh blockpull gluster-job vda --base /dev/null
 error: internal error: Unexpected error: (GenericError) 'Base '/dev/null' not found'

With most of our storage backends it's possible to have two separate
volume keys to point to a single volume. (By creating sym/hard-links to
local files or by mounting remote filesystems to two different locations
and creating pools on top of them) Document this possibility.

In storageVolLookupByPath the provided path is "sanitized" at first.
This removes some extra slashes and stuff. When the lookup of the volume
fails the original path is used which makes it hard to trace errors in
some cases.

Improve the error message to print the sanitized path along with the
user provided path if they are not equal.

When looking up a volume by path on a non-local filesystem don't use the
"cleaned" path that might be mangled in such a way that it will differ
from a path provided by a storage backend.

Skip the cleanup step for gluster, sheepdog and RBD.

Pools that are not backed by files in the filesystem cause problems with
some APIs. Error out when attempting to upload a volume in such a pool
as currently we expect a local file representation for it.

If a user specifies the pool explicitly, we should make sure to point
out that it's inactive instead of falling back to lookup by key/path and
failing at the end. Also if the pool isn't found there's no use in
continuing the lookup.

This changes the error in case the user-selected pool is inactive from:

 $ virsh vol-upload --pool inactivepool --vol somevolname volcontents
 error: failed to get vol 'somevolname'
 error: Storage volume not found: no storage vol with matching path
 somevolname

To a more descriptive:

 $ virsh vol-upload --pool inactivepool --vol somevolname volcontents
 error: pool 'inactivepool' is not active

And in case a user specifies an invalid pool from:

 $ virsh vol-upload --pool invalidpool --vol somevolname volcontents
 error: failed to get pool 'invalidpool'
 error: failed to get vol 'somevolname', specifying --pool might help
 error: Storage volume not found: no storage vol with matching path somevolname

To something less confusing:

 $ virsh vol-upload --pool invalidpool --vol somevolname volcontents
 error: failed to get pool 'invalidpool'
 error: Storage pool not found: no storage pool with matching name 'invalidpool'

Signed-off-by: NChunyan Liu <cyliu@suse.com>

Specify which driver and which domain in used_by area to avoid conflict among
different drivers.
Signed-off-by: NChunyan Liu <cyliu@suse.com>

The reason for these is that aa-status doesn't show the process using
the profile as they are in another namespace.

If apparmor security driver is enabled in either qemu or lxc
driver configuration and libvirtd starts before AppArmor, it will fail.

use_apparmor() was first designed to be called from withing libvirtd,
but libvirt_lxc also uses it. in libvirt_lxc, there is no need to check
whether to use apparmor or not: just use it if possible.

In qemuMonitorJSONExtractCPUInfo an error message hinted on missing
character device data which is wrong.

Also a comment states that only qemu-kvm tree includes the thread_id
field. This is no longer true.

https://bugzilla.redhat.com/show_bug.cgi?id=1071264

Reverting of external snapshots is not supported currently. The check
that is present doesn't properly check for all aspects that make a
snapshot external. Use virDomainSnapshotIsExternal() to do the check.

As I did previously in 4f588a1b, libvirt needs to set virtio vectors.
Previously, we were advised to use vectors=N, where

N = 2 * (number of queues) + 1

However, just recently this advisory has changed on the Multiquue wiki
page [1] to:

N = 2 * (number of queues) + 2

1: http://www.linux-kvm.org/page/Multiqueue#Enable_MQ_featureSigned-off-by: NMichal Privoznik <mprivozn@redhat.com>

If systemd is installed, but is not the init system,
systemd-machined fails with an unhelpful error message:
Launch helper exited with unknown return code 1

Currently we only check if the "machine1" service is
available (in ListActivatableNames).
Also check if "systemd1" service is registered with DBus
(ListNames).

This fixes https://bugs.gentoo.org/show_bug.cgi?id=493246#c22