- 23 11月, 2011 2 次提交
-
-
由 Stefan Berger 提交于
This patch adds support for filtering of STP (spanning tree protocol) traffic to the parser and makes us of the ebtables support for STP filtering. This code now enables the filtering of traffic in chains with prefix 'stp'. Signed-off-by: NStefan Berger <stefanb@linux.vnet.ibm.com>
-
由 Stefan Berger 提交于
With hunks borrowed from one of David Steven's previous patches, we now add the capability of having a 'mac' chain which is useful to filter for multiple valid MAC addresses. Signed-off-by: NDavid L Stevens <dlstevens@us.ibm.com> Signed-off-by: NStefan Berger <stefanb@linux.vnet.ibm.com>
-
- 19 11月, 2011 9 次提交
-
-
由 Stefan Berger 提交于
This patch adds support for filtering of VLAN (802.1Q) traffic to the parser and makes us of the ebtables support for VLAN filtering. This code now enables the filtering of traffic in chains with prefix 'vlan'. Signed-off-by: NStefan Berger <stefanb@linux.vnet.ibm.com>
-
由 Stefan Berger 提交于
This patch extends the NWFilter driver for Linux (ebiptables) to create rules for each member of a previously introduced list. If for example an attribute value (internally) looks like this: IP = [10.0.0.1, 10.0.0.2, 10.0.0.3] then 3 rules will be generated for a rule accessing the variable 'IP', one for each member of the list. The effect of this is that this now allows for filtering for multiple values in one field. This can then be used to support for filtering/allowing of multiple IP addresses per interface. An iterator is introduced that extracts each member of a list and puts it into a hash table which then is passed to the function creating a rule. For the above example the iterator would cause 3 loops. Signed-off-by: NStefan Berger <stefanb@linux.vnet.ibm.com>
-
由 Stefan Berger 提交于
NWFilters can be provided name-value pairs using the following XML notation: <filterref filter='xyz'> <parameter name='PORT' value='80'/> <parameter name='VAL' value='abc'/> </filterref> The internal representation currently is so that a name is stored as a string and the value as well. This patch now addresses the value part of it and introduces a data structure for storing a value either as a simple value or as an array for later support of lists. This patch adjusts all code that was handling the values in hash tables and makes it use the new data type. Signed-off-by: NStefan Berger <stefanb@linux.vnet.ibm.com>
-
由 Stefan Berger 提交于
The previous patch extends the priority of filtering rules into negative numbers. We now use this possibility to interleave the jumping into chains with filtering rules to for example create the 'root' table of an interface with the following sequence of rules: Bridge chain: libvirt-I-vnet0, entries: 6, policy: ACCEPT -p IPv4 -j I-vnet0-ipv4 -p ARP -j I-vnet0-arp -p ARP -j ACCEPT -p 0x8035 -j I-vnet0-rarp -p 0x835 -j ACCEPT -j DROP The '-p ARP -j ACCEPT' rule now appears between the jumps. Since the 'arp' chain has been assigned priority -700 and the 'rarp' chain -600, the above ordering can now be achieved with the following rule: <rule action='accept' direction='out' priority='-650'> <mac protocolid='arp'/> </rule> This patch now sorts the commands generating the above shown jumps into chains and interleaves their execution with those for generating rules. Signed-off-by: NStefan Berger <stefanb@linux.vnet.ibm.com>
-
由 Stefan Berger 提交于
So far rules' priorities have only been valid in the range [0,1000]. Now I am extending their priority into the range [-1000, 1000] for subsequently being able to sort rules and the access of (jumps into) chains following priorities. Signed-off-by: NStefan Berger <stefanb@linux.vnet.ibm.com>
-
由 Stefan Berger 提交于
Use the name of the chain rather than its type index (enum). This pushes the later enablement of chains with user-given names into the XML parser. For now we still only allow those names that are well known ('root', 'arp', 'rarp', 'ipv4' and 'ipv6'). Signed-off-by: NStefan Berger <stefanb@linux.vnet.ibm.com>
-
由 Stefan Berger 提交于
Use scripts for the renaming and cleaning up of chains. This allows us to get rid of some of the code that is only capable of renaming and removing chains whose names are hardcoded. A shell function 'collect_chains' is introduced that is given the name of an ebtables chain and then recursively determines the names of all chains that are accessed from this chain and its sub-chains using 'jumps'. The resulting list of chain names is then used to delete all the found chains by first flushing and then deleting them. The same function is also used for renaming temporary filters to their final names. I tested this with the bash and dash as script interpreters. Signed-off-by: NStefan Berger <stefanb@linux.vnet.ibm.com>
-
由 Stefan Berger 提交于
Use the previously introduced chain priorities to sort the chains for access from an interface's 'root' table and have them created in the proper order. This gets rid of a lot of code that was previously creating the chains in a more hardcoded way. To determine what protocol a filter is used for evaluation do prefix- matching, i.e., the filter 'arp' is used to filter for the 'arp' protocol, 'ipv4' for the 'ipv4' protocol and 'arp-xyz' will also be used to filter for the 'arp' protocol following the prefix 'arp' in its name. Signed-off-by: NStefan Berger <stefanb@linux.vnet.ibm.com>
-
由 Stefan Berger 提交于
For better handling of the sorting of chains introduce an internally used priority. Use a lookup table to store the priorities. For now their actual values do not matter just that the values cause the chains to be properly sorted through changes in the following patches. However, the values are chosen as negative so that once they are sorted along with filtering rules (whose priority may only be positive for now) they will always be instantiated before them (lower values cause instantiation before higher values). This is done to maintain backwards compatibility. Signed-off-by: NStefan Berger <stefanb@linux.vnet.ibm.com>
-
- 10 11月, 2011 3 次提交
-
-
由 Eric Blake 提交于
It's not worth even worrying about a temporary file, unless we ever expect the script to exceed maximum command-line argument length limits. * src/nwfilter/nwfilter_ebiptables_driver.c (ebiptablesExecCLI): Run the commands as an argument to /bin/sh, rather than worrying about a temporary file. (ebiptablesWriteToTempFile): Delete unused function.
-
由 Eric Blake 提交于
If /tmp is mounted with the noexec flag (common on security-conscious systems), then nwfilter will fail to initialize, because we cannot run any temporary script via virRun("/tmp/script"); but we _can_ use "/bin/sh /tmp/script". For that matter, using /tmp risks collisions with other unrelated programs; we already have /var/run/libvirt as a dedicated temporary directory for use by libvirt. * src/nwfilter/nwfilter_ebiptables_driver.c (ebiptablesWriteToTempFile): Use internal directory, not /tmp; drop attempts to make script executable; and detect close error. (ebiptablesExecCLI): Switch to virCommand, and invoke the shell to read the script, rather than requiring an executable script.
-
由 Daniel P. Berrange 提交于
The socket address APIs in src/util/network.h either take the form virSocketAddrXXX, virSocketXXX or virSocketXXXAddr. Sanitize this so everything is virSocketAddrXXXX, and ensure that the virSocketAddr parameter is always the first one. * src/util/network.c, src/util/network.h: Santize socket address API naming * src/conf/domain_conf.c, src/conf/network_conf.c, src/conf/nwfilter_conf.c, src/network/bridge_driver.c, src/nwfilter/nwfilter_ebiptables_driver.c, src/nwfilter/nwfilter_learnipaddr.c, src/qemu/qemu_command.c, src/rpc/virnetsocket.c, src/util/dnsmasq.c, src/util/iptables.c, src/util/virnetdev.c, src/vbox/vbox_tmpl.c: Update for API renaming
-
- 22 7月, 2011 1 次提交
-
-
由 Eric Blake 提交于
In preparation for a future patch adding new virFile APIs. * src/util/files.h, src/util/files.c: Move... * src/util/virfile.h, src/util/virfile.c: ...here, and rename functions to virFile prefix. Macro names are intentionally left alone. * *.c: All '#include "files.h"' uses changed. * src/Makefile.am (UTIL_SOURCES): Reflect rename. * cfg.mk (exclude_file_name_regexp--sc_prohibit_close): Likewise. * src/libvirt_private.syms: Likewise. * docs/hacking.html.in: Likewise. * HACKING: Regenerate.
-
- 08 6月, 2011 1 次提交
-
-
由 Cole Robinson 提交于
Seems reasonable to have all command wrappers in the same place v2: Dont move SetInherit v3: Comment spelling fix Adjust WARN0 comment Remove spurious #include movement Don't include sys/types.h Combine virExec enums Signed-off-by: NCole Robinson <crobinso@redhat.com>
-
- 24 5月, 2011 1 次提交
-
-
由 Stefan Berger 提交于
This patch enables filtering of gratuitous ARP packets using the following XML: <rule action='accept' direction='in' priority='425'> <arp gratuitous='true'/> </rule>
-
- 12 5月, 2011 1 次提交
-
-
由 Lai Jiangshan 提交于
These VIR_XXXX0 APIs make us confused, use the non-0-suffix APIs instead. How do these coversions works? The magic is using the gcc extension of ##. When __VA_ARGS__ is empty, "##" will swallow the "," in "fmt," to avoid compile error. example: origin after CPP high_level_api("%d", a_int) low_level_api("%d", a_int) high_level_api("a string") low_level_api("a string") About 400 conversions. 8 special conversions: VIR_XXXX0("") -> VIR_XXXX("msg") (avoid empty format) 2 conversions VIR_XXXX0(string_literal_with_%) -> VIR_XXXX(%->%%) 0 conversions VIR_XXXX0(non_string_literal) -> VIR_XXXX("%s", non_string_literal) (for security) 6 conversions Signed-off-by: NLai Jiangshan <laijs@cn.fujitsu.com>
-
- 06 5月, 2011 1 次提交
-
-
由 Eric Blake 提交于
We already have virAsprintf, so picking a similar name helps for seeing a similar purpose. Furthermore, the prefix V before printf generally implies 'va_list', even though this variant was '...', and the old name got in the way of adding a new va_list version. global rename performed with: $ git grep -l virBufferVSprintf \ | xargs -L1 sed -i 's/virBufferVSprintf/virBufferAsprintf/g' then revert the changes in ChangeLog-old.
-
- 20 4月, 2011 1 次提交
-
-
由 Stefan Berger 提交于
Ebtables filtering doesn't work on macvtap device. Remove support for direct type of interface.
-
- 15 4月, 2011 1 次提交
-
-
由 Christophe Fergeau 提交于
gcc 4.6 warns when a variable is initialized but isn't used afterwards: vmware/vmware_driver.c:449:18: warning: variable 'vmxPath' set but not used [-Wunused-but-set-variable] This patch fixes these warnings. There are still 2 offending files: - vbox_tmpl.c: the variable is used inside an #ifdef and is assigned several times outside of #ifdef. Fixing the warning would have required wrapping all the assignment inside #ifdef which hurts readability. vbox/vbox_tmpl.c: In function 'vboxAttachDrives': vbox/vbox_tmpl.c:3918:22: warning: variable 'accessMode' set but not used [-Wunused-but-set-variable] - esx_vi_types.generated.c: the name implies it's generated code and I didn't want to dive into the code generator esx/esx_vi_types.generated.c: In function 'esxVI_FileQueryFlags_Free': esx/esx_vi_types.generated.c:1203:3: warning: variable 'item' set but not used [-Wunused-but-set-variable]
-
- 08 4月, 2011 1 次提交
-
-
由 Stefan Berger 提交于
This patch adds support for the evaluation of TCP flags in nwfilters. It adds documentation to the web page and extends the tests as well. Also, the nwfilter schema is extended. The following are some example for rules using the tcp flags: <rule action='accept' direction='in'> <tcp state='NONE' flags='SYN/ALL' dsptportstart='80'/> </rule> <rule action='drop' direction='in'> <tcp state='NONE' flags='SYN/ALL'/> </rule>
-
- 25 3月, 2011 1 次提交
-
-
由 Eric Blake 提交于
Child processes don't always reach _exit(); if they die from a signal, then any messages should still be accurate. Most users either expect a 0 status (thankfully, if status==0, then WIFEXITED(status) is true and WEXITSTATUS(status)==0 for all known platforms) or were filtering on WIFEXITED before printing a status, but a few were missing this check. Additionally, nwfilter_ebiptables_driver was making an assumption that works on Linux (where WEXITSTATUS shifts and WTERMSIG just masks) but fails on other platforms (where WEXITSTATUS just masks and WTERMSIG shifts). * src/util/command.h (virCommandTranslateStatus): New helper. * src/libvirt_private.syms (command.h): Export it. * src/util/command.c (virCommandTranslateStatus): New function. (virCommandWait): Use it to also diagnose status from signals. * src/security/security_apparmor.c (load_profile): Likewise. * src/storage/storage_backend.c (virStorageBackendQEMUImgBackingFormat): Likewise. * src/util/util.c (virExecDaemonize, virRunWithHook) (virFileOperation, virDirCreate): Likewise. * daemon/remote.c (remoteDispatchAuthPolkit): Likewise. * src/nwfilter/nwfilter_ebiptables_driver.c (ebiptablesExecCLI): Likewise.
-
- 19 2月, 2011 1 次提交
-
-
由 Stefan Berger 提交于
This patch adds the possibility to not just drop packets, but to also have them rejected where iptables at least sends an ICMP msg back to the originator. On ebtables this again maps into dropping packets since rejecting is not supported. I am adding 'since 0.8.9' to the docs assuming this will be the next version of libvirt.
-
- 15 2月, 2011 1 次提交
-
-
由 Stefan Berger 提交于
This patch reorders the connlimit and comment match extensions relative to the state match (-m state); connlimit being most useful if found after a -m state --state NEW and not before it.
-
- 10 2月, 2011 1 次提交
-
-
由 Daniel P. Berrange 提交于
When run non-root the nwfilter driver logs error messages about being unable to find iptables/ebtables commands (they are in /sbin which isn't in $PATH). The nwfilter driver can't ever work as non-root, so simply skip it entirely thus avoiding the error messages * src/conf/nwfilter_conf.h, src/nwfilter/nwfilter_driver.c, src/nwfilter/nwfilter_gentech_driver.c, src/nwfilter/nwfilter_gentech_driver.h: Pass 'bool privileged' flag down to final driver impl * src/nwfilter/nwfilter_ebiptables_driver.c: Skip initialization if not privileged
-
- 29 1月, 2011 1 次提交
-
-
由 Matthias Bolte 提交于
Pure cosmetic change.
-
- 19 1月, 2011 1 次提交
-
-
由 Matthias Bolte 提交于
VIR_ERR_INVALID_* is meant for invalid pointers only.
-
- 17 11月, 2010 1 次提交
-
-
由 Stefan Berger 提交于
Rather than only cleaning any remaining ebtables rules, also clean those applied to iptables and ip6tables when detecting the IP address of an interface. Previous applied iptables rules may hinder DHCP packets.
-
- 16 11月, 2010 2 次提交
-
-
由 Eric Blake 提交于
* src/nwfilter/nwfilter_ebiptables_driver.c (CMD_EXEC): Fix syntax error in previous patch. Reported by Stefan Berger.
-
由 Eric Blake 提交于
* src/nwfilter/nwfilter_ebiptables_driver.c (ebiptablesWriteToTempFile): Use /bin/sh. (bash_cmd_path): Delete. (ebiptablesDriverInit, ebiptablesDriverShutdown): No need to search for bash. (CMD_EXEC): Prefer $() over ``, since we can assume POSIX. (iptablesSetupVirtInPost): Use portable 'test' syntax. (iptablesLinkIPTablesBaseChain): Use POSIX $(()) syntax.
-
- 10 11月, 2010 1 次提交
-
-
由 Stefan Berger 提交于
Using automated replacement with sed and editing I have now replaced all occurrences of close() with VIR_(FORCE_)CLOSE() except for one, of course. Some replacements were straight forward, others I needed to pay attention. I hope I payed attention in all the right places... Please have a look. This should have at least solved one more double-close error.
-
- 22 10月, 2010 2 次提交
-
-
由 Daniel P. Berrange 提交于
The getnameinfo() function is more flexible than inet_ntop() avoiding the need to if/else the code based on socket family. Also make it support UNIX socket addrs and allow inclusion of a port (service) address. Finally do proper error reporting via normal APIs. * src/conf/domain_conf.c, src/nwfilter/nwfilter_ebiptables_driver.c, src/qemu/qemu_conf.c: Fix error handling with virSocketFormat * src/util/network.c: Rewrite virSocketFormat to use getnameinfo and cope with UNIX socket addrs.
-
由 Daniel P. Berrange 提交于
The nwIPAddress was simply a wrapper about virSocketAddr. Just use the latter directly, removing all the extra field de-references from code & helper APIs for parsing/formatting. Also remove all the redundant casts from strong types to void * and then immediately back to strong types. * src/conf/nwfilter_conf.h: Remove nwIPAddress * src/conf/nwfilter_conf.c, src/nwfilter/nwfilter_ebiptables_driver.c: Update to use virSocketAddr and remove void * casts.
-
- 20 10月, 2010 1 次提交
-
-
由 Stefan Berger 提交于
Avoid the enforcement of direction if - icmp rules specify the type/code information - the 'skipMatch' variable is set to 'true'
-
- 19 10月, 2010 1 次提交
-
-
由 Stefan Berger 提交于
In the table built for traffic coming from the VM going to the host make the following changes: - don't ACCEPT the packets but do a 'RETURN' and let the host-specific firewall rules in subsequent rules evaluate whether the traffic is allowed to enter - use the '-m state' in the rules as everywhere else
-
- 14 10月, 2010 1 次提交
-
-
由 Stefan Berger 提交于
The following filter transition from a filter allowing incoming TCP connections <rule action='accept' direction='in' priority='401'> <tcp/> </rule> <rule action='accept' direction='out' priority='500'> <tcp/> </rule> to one that does not allow them <rule action='drop' direction='in' priority='401'> <tcp/> </rule> <rule action='accept' direction='out' priority='500'> <tcp/> </rule> did previously not cut off existing (ssh) connections but only prevented newly initiated ones. The attached patch allows to cut off existing connections as well, thus enforcing what the filter is showing. I had only tested with a configuration where the physical interface is connected to the bridge where the filters are applied. This patch now also solves a filtering problem where the physical interface is not connected to the bridge, but the bridge is given an IP address and the host routes between bridge and physical interface. Here the filters drop non-allowed traffic on the outgoing side on the host.
-
- 09 10月, 2010 1 次提交
-
-
由 Guido Günther 提交于
to avoid long timeouts waiting for DNS servers
-
- 07 10月, 2010 1 次提交
-
-
由 Stefan Berger 提交于
In this patch I am extending the rule instantiator to create the state match according to the state attribute in the XML. Only one iptables rule in the incoming or outgoing direction will be created for a rule in direction 'in' or 'out' respectively. A rule in direction 'inout' does get iptables rules in both directions.
-
- 04 10月, 2010 1 次提交
-
-
由 Stefan Berger 提交于
Fixing memory leak shown by valgrind and freeing buffer in two more places.
-