- 21 8月, 2010 1 次提交
-
-
由 Jim Fehlig 提交于
Xen supports on_crash actions coredump-{destroy,restart}. libvirt cannot parse config returned by xend that contains either of these actions xen52 # xm li -l test | grep on_crash (on_crash coredump-restart) xen52 # virsh dumpxml test error: internal error unknown lifecycle type coredump-restart This patch adds a new virDomainLifecycleCrash enum and appends the new options to existing destroy, restart, preserve, and rename-restart options.
-
- 20 8月, 2010 12 次提交
-
-
由 Jiri Denemark 提交于
We already filled the PCI address structure when we checked whether it's free or not, so let's just use the structure here instead of filling it again.
-
由 Jiri Denemark 提交于
-
由 Jiri Denemark 提交于
-
由 Eric Blake 提交于
* src/vbox/vbox_tmpl.c (vboxDomainCreateWithFlags): Split... (vboxStartMachine): ...into new helper.
-
由 Eric Blake 提交于
* configure.ac (vbox_xpcomc_dir): Add another potential dir.
-
由 Eric Blake 提交于
* src/xenapi/xenapi_utils.h (createVifNetwork): Delete prototype. * src/xenapi/xenapi_utils.c (createVifNetwork): Change signature, and use virAsprintf. Detect allocation failure. (createVMRecordFromXml): Adjust caller.
-
由 Eric Blake 提交于
* src/storage/storage_backend.c (virStorageBackendCreateQemuImg) (virStorageBackendCreateQcowCreate): Use virAsprintf instead. * src/storage/storage_backend_disk.c (virStorageBackendDiskCreateVol, virStorageBackendDiskPartFormat): Likewise.
-
由 Eric Blake 提交于
* src/storage/storage_backend_disk.c (virStorageBackendDiskPartFormat): Fix spacing.
-
由 Eric Blake 提交于
* src/qemu/qemu_driver.c (qemudGetProcessInfo): Clean up. * src/uml/uml_driver.c (umlGetProcessInfo): Likewise. * src/xen/sexpr.c (_string2sexpr): Likewise.
-
由 Patrick Dignan 提交于
I wrote a patch to add support for listing the Vendor and Model of a storage pool in the storage pool XML. This would allow vendor extensions of specific devices. The patch includes a test for the new attributes as well. Patrick Dignan
-
由 Eric Blake 提交于
* src/uml/uml_driver.c (umlMonitorCommand): Validate that enough bytes were read to dereference both res.length, and that many bytes from res.data. Reported by Soren Hansen.
-
由 Eric Blake 提交于
* src/nwfilter/nwfilter_driver.c (nwfilterLog): Delete. (nwfilterDriverStartup): Use virReportOOMError instead.
-
- 19 8月, 2010 1 次提交
-
-
由 Eric Blake 提交于
node_device/node_device_driver.c: In function 'nodeDeviceVportCreateDelete': node_device/node_device_driver.c:423: error: implicit declaration of function 'stat' [-Wimplicit-function-declaration] * src/node_device/node_device_driver.c (includes): Add <sys/stat.h>.
-
- 18 8月, 2010 7 次提交
-
-
由 Daniel Veillard 提交于
Doing `virsh schedinfo rhel5u3 --cap 65535' the hypervisor does the call, but does not change the value nor raise an error. Best is just to consider it's not in the allowed values. The problem is that the error won't be output since the xend driver will then be called and raise an error error: this function is not supported by the hypervisor: unsupported in xendConfigVersion < 4 which will override the useful information from xenUnifiedDomainSetSchedulerParameters(). So best is to also invert the order in which the xen sub-drivers are called. * src/xen/xen_hypervisor.c: mark 65535 cap value as out of bound * src/xen/xen_hypervisor.c: reverse the order of the calls to the xen sub drivers to get the error message if needed
-
由 Jiri Denemark 提交于
-
由 Dave Allan 提交于
Some kernels, such as the one used in RHEL-5, have vport_create and vport_delete operation files in /sys/class/scsi_host/hostN directory instead of /sys/class/fc_host/hostN. Let's check both paths for compatibility reasons. This also removes unnecessary '/' characters from sysfs paths containing LINUX_SYSFS_FC_HOST_PREFIX.
-
由 Daniel Berrange 提交于
-
由 Daniel Berrange 提交于
NodeDeviceCreateXML and NodeDeviceDestroy methods added for NPIV were using the wrong privateData field for the remote driver. This doesn't impact KVM, since the remote driver handles everything, thus privateData == devMonPrivateData. It does impact Xen though, because the remote driver only handles a subset of methods and thus privateData != devMonPrivateData.
-
由 Matthias Bolte 提交于
In case an optional object cannot be found the lookup function is left early and the cleanup code is not executed. This pattern occurs in some other functions too.
-
由 Chris Lalancette 提交于
The current version of the qemu managed save implementation is subject to a race where the domain shuts down between the time that we start the command and the time that we actually try to do the save. Close this race by making qemuDomainSaveFlags() expect both the driver and the passed-in vm object to be locked before executing. Signed-off-by: NChris Lalancette <clalance@redhat.com>
-
- 17 8月, 2010 7 次提交
-
-
由 Eric Blake 提交于
Add documentation for features added a while ago. * docs/formatdomain.html.in (Time keeping): Update documentation of <clock> element to match 0.8.0 addition.
-
由 Stefan Berger 提交于
Fixing a problem in the build on cygwin due to missing #define's.
-
由 Jiri Denemark 提交于
This also makes the message consistent with the message used in error path of qemudDomainAttachHostPciDevice.
-
由 Jiri Denemark 提交于
-
由 Jiri Denemark 提交于
When reconnecting to existing VMs, we re-reserved only those PCI addresses which were explicitly mentioned in domain XML. Since some addresses are always reserved (e.g., 0:0:0 and 0:0:1), we need to handle those too. Also all this should only be done if device flag is supported by qemu.
-
由 Jamie Strandboge 提交于
* src/security/virt-aa-helper.c: Add missing include.
-
由 Stefan Berger 提交于
In this patch I am extending and fixing the nwfilter module's reload support to stop all ongoing threads (for learning IP addresses of interfaces) and rebuild the filtering rules of all interfaces of all VMs when libvirt is started. Now libvirtd rebuilds the filters upon the SIGHUP signal and libvirtd restart. About the patch: The nwfilter functions require a virConnectPtr. Therefore I am opening a connection in qemudStartup, which later on needs to be closed outside where the driver lock is held since otherwise it ends up in a deadlock due to virConnectClose() trying to lock the driver as well. I have tested this now for a while with several machines running and needing the IP address learner thread(s). The rebuilding of the firewall rules seems to work fine following libvirtd restart or a SIGHUP. Also the termination of libvirtd worked fine.
-
- 15 8月, 2010 7 次提交
-
-
由 Eric Blake 提交于
* .gnulib: Update to latest. Reported by Matthias Bolte.
-
由 Matthias Bolte 提交于
floppy0.present defaults to true. Therefore, it needs to be explicitly set to false when the XML config doesn't specify the corresponding floppy device. Also update tests accordingly.
-
由 Matthias Bolte 提交于
-
由 Eduardo Otubo 提交于
I changed virStorage[Open|Close] to virVIOSDriver[Open|Close] so the network driver can use it - since the network driver deals with Open/Close in the same way.
-
由 Soren Hansen 提交于
This patch does two things: * It makes umlConnectTapDevice ask brAddTap for a persistent tap by passing it a NULL tapfd argument. * Stops umlConnectTapDevice from immediately dismantling the bridge it just set up. Signed-off-by: NSoren Hansen <soren@linux2go.dk>
-
由 Soren Hansen 提交于
When passing a NULL tapfd argument to brAddTap, we need to close the fd of the tap device. If we don't, libvirt will keep the fd open indefinitely and renders the the guest unable to configure its side of the tap device. Signed-off-by: NSoren Hansen <soren@linux2go.dk>
-
由 Soren Hansen 提交于
If umlBuildCommandLineChr fails (e.g. due to an unsupported chardev type), it returns NULL. umlBuildCommandLine does not check for this and sets this as an argument on the comand line, effectively ending the argument list. This patch checks for this case and sets the chardev to "none". Signed-off-by: NSoren Hansen <soren@linux2go.dk>
-
- 14 8月, 2010 3 次提交
-
-
由 Stefan Berger 提交于
When sniffing the network traffic, discard class D and E IP addresses when sniffing traffic. This was a reason why filters were not correctly rebuilt on VMs on the local 192.* network when libvirt was restarted and those VMs did not use a DHCP request to get its IP address.
-
由 Stefan Berger 提交于
While testing the SIGHUP handling and reloading of the nwfilter driver, I found that when the filters are rebuilt and mutlipe threads handled the individual interfaces, concurrently running multiple external bash scripts causes strange failures even though the executed ebtables commands are working on different tables for different interfaces. I cannot say for sure where the concurrency problems are caused, but introducing this lock definitely helps.
-
由 Matthias Bolte 提交于
-
- 13 8月, 2010 2 次提交
-
-
由 Chris Lalancette 提交于
Since the qemu process is running as qemu:qemu, it can't actually look at the unix socket in /var/run/libvirt/qemu which is owned by root and has permission 700. Move the unix socket to /var/lib/libvirt/qemu, which is already owned by qemu:qemu. Thanks to Justin Clift for test this out for me. Signed-off-by: NChris Lalancette <clalance@redhat.com>
-
由 Chris Lalancette 提交于
The problem is that on the source of the migration, libvirtd is responsible for creating the unix socket over which the data will flow. Since libvirtd is running as root, this file will be created as root. When the qemu process running as qemu:qemu goes to access the unix file to write data to it, it will get permission denied and fail. Make sure to change the owner of the unix file to qemu:qemu. Thanks to Justin Clift for testing this patch out for me. Signed-off-by: NChris Lalancette <clalance@redhat.com>
-