When virConnectDomainQemuMonitorEventRegister is called with the
VIR_CONNECT_DOMAIN_QEMU_MONITOR_EVENT_REGISTER_REGEX flag,
ignore the flag instead of crashing.

https://bugzilla.redhat.com/show_bug.cgi?id=1144920

Fix the typo in VIR_DOMAIN_TUNABLE_CPU_EMULATORIN
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

For the new VIR_DOMAIN_EVENT_ID_TUNABLE event we have a bunch of
constants added

   VIR_DOMAIN_EVENT_CPUTUNE_<blah>
   VIR_DOMAIN_EVENT_BLKDEVIOTUNE_<blah>

This naming convention is bad for two reasons

  - There is no common prefix unique for the events to both
    relate them, and distinguish them from other event
    constants

  - The values associated with the constants were chosen
    to match the names used with virConnectGetAllDomainStats
    so having EVENT in the constant name is not applicable in
    that respect

This patch proposes renaming the constants to

    VIR_DOMAIN_TUNABLE_CPU_<blah>
    VIR_DOMAIN_TUNABLE_BLKDEV_<blah>

ie, given them a common VIR_DOMAIN_TUNABLE prefix.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

https://bugzilla.redhat.com/show_bug.cgi?id=993411

On some systems (using libtirpc instead of glibc's
implementation), xdr_uint64_t exists rather under different name:
xdr_u_int64_t. This makes compilation fail then:

libvirt_lxc-lxc_monitor_protocol.o: In function `xdr_virLXCMonitorInitEventMsg':
/usr/local/src/libvirt/libvirt-1.1.1/src/./lxc/lxc_monitor_protocol.c:31: undefined reference to `xdr_uint64_t'

Therefore we rather mirror the d707c866 commit and redefine
xdr_uint64_t if needed.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

On a domain startup, the variable store path is generated if needed.
The path is intended to be generated only once. However, the updated
domain definition is not saved into config dir rather than state XML
only. So later, whenever the domain is destroyed and the daemon is
restarted, the generated path is forgotten and the file may be left
behind on virDomainUndefine() call.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

There's no one to free() it anyway. Instead, we can just pass the
provided array pointer directly.

==20039== 48 bytes in 4 blocks are definitely lost in loss record 658 of 787
==20039==    at 0x4C2A700: calloc (in /usr/lib64/valgrind/vgpreload_memcheck-amd64-linux.so)
==20039==    by 0x4EA661F: virAllocN (viralloc.c:191)
==20039==    by 0x50386EF: remoteNodeGetFreePages (remote_driver.c:7625)
==20039==    by 0x5003504: virNodeGetFreePages (libvirt.c:21379)
==20039==    by 0x154625: cmdFreepages (virsh-host.c:374)
==20039==    by 0x12F718: vshCommandRun (virsh.c:1935)
==20039==    by 0x1339FB: main (virsh.c:3747)
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Fix comments about the version in which '.nodeAllocPages' are added.
Signed-off-by: NTomoki Sekiyama <tomoki.sekiyama@hds.com>

Since 363e9a68 we track backing chain metadata when creating snapshots
the right way even for the inactive configuration. As we did not yet
update other code paths that modify the backing chain (blockpull) the
newDef backing chain gets out of sync.

After stopping of a VM the new definition gets copied to the next start
one. The new VM then has incorrect backing chain info. This patch
switches the backing chain detector to always purge the existing backing
chain and forces re-detection to avoid this issue until we'll have full
backing chain tracking support.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1144922

Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

Due to a missing check the API can be successfully called even if
the connection is ReadOnly. Fortunately, the API hasn't been
released yet, so there's no need for a CVE.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Add files parallels_sdk.c and parallels_sdk.h for code
which works with SDK, so libvirt's code will not mix with
dealing with parallels SDK.

To use Parallels SDK you must first call PrlApi_InitEx function,
and then you will be able to connect to a server with
PrlSrv_LoginLocalEx function. When you've done you must call
PrlApi_Deinit. So let's call PrlApi_InitEx on first .connectOpen,
count number of connections and deinitialize, when this counter
becomes zero.
Signed-off-by: NDmitry Guryanov <dguryanov@parallels.com>

Executing prlctl command is not an optimal way to interact with
Parallels Cloud Server (PCS), it's better to use parallels SDK,
which is a remote API to paralles dispatcher service.

We prepared opensource version of this SDK and published it on
github, it's distributed under LGPL license. Here is a git repo:
https://github.com/Parallels/parallels-sdk.

To build with parallels SDK user should get compiler and linker
options from pkg-config 'parallels-sdk' file. So fix checks in
configure script and build with parallels SDK, if that pkg-config
file exists and add gcc options to makefile.
Signed-off-by: NDmitry Guryanov <dguryanov@parallels.com>

We have these configuration knobs, like max_clients and
max_anonymous_clients. They limit the number of clients
connected.  Whenever the limit is reached, the daemon stops
accepting new ones and resumes if one of the connected clients
disconnects. If that's the case, a debug message is printed into
the logs. And when the daemon starts over to accept new clients
too. However, the problem is the messages have debug priority.
This may be unfortunate, because if the daemon stops accepting
new clients all of a sudden, and users don't have debug logs
enabled they have no idea what's going on. Raise the messages
level to INFO at least.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

The changes in commit c7542573 introduced possible segfault. Looking
deeper into the code and the original code before the patch series were
applied I think that we should report error for each function failure
and also we shouldn't call some of the function twice.

Found by coverity.
Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

Use the universal tunable event to report changes to user. All
blkdeviotune values are prefixed with "blkdeviotune".
Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

When you updated some blkdeviotune values for running domain the values
were stored only internally, but not saved into the live XML so they
won't survive restarting the libvirtd.
Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

The commit 1b854c76 introduced a new function 'virPolkitCheckAuth' and
in the #else section when you don't have polkit all attributes should be
follwed by ATTRIBUTE_UNUSED.
Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

It would be nice to also print a params pointer and number of params in
the debug message and the previous limit for number of params in the rpc
message was too large. The 2048 params will be enough for future events.
Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

The new virsh command is named 'allocpages'.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

And add stubs to other drivers like: lxc, qemu, uml and vbox.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

This internal API can be used to allocate or free some pages in
the huge pages pool.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

A long time ago in a galaxy far, far away it has been decided
that libvirt will manage not only domains but host as well. And
with my latest work on qemu driver supporting huge pages, we miss
the cherry on top: an API to allocate huge pages on the run.
Currently users are forced to log into the host and adjust the
huge pages pool themselves.  However, with this API the problem
is gone - they can both size up and size down the pool.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

In the previous patch I've changed the for loop bounds but forgot
to 'git add' changes that adapt the rest of the code.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

The check for ISCSI devices was missing a check of subsys type, which
meant we could skip labelling of other host devices as well. This fixes
USB hotplug on F21

https://bugzilla.redhat.com/show_bug.cgi?id=1145968

When building on mingw the format string for long long/unsigned long
long have to be I64d/I64u instead of lld/llu.
Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

Spawning the pkcheck program every time a permission check is
required is hugely expensive on CPU. The pkcheck program is just
a dumb wrapper for the DBus API, so rewrite the code to use the
DBus API directly. This also simplifies error handling a bit.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Currently DBus dict values must be passed inline

   virDBusMessageEncode("a{ss}",
                        3,
                        "key1", "val1",
                        "key2", "val2",
                        "key3", "val3");
   virDBusMessageDecode("a{ss}",
                        3,
                        &key1, &val1,
                        &key2, &val2,
                        &key3, &val3);

This allows them to be passed by reference

   const char **dictin = {
      "key1", "val1",
      "key2", "val2",
      "key3", "val3"
   };
   char **dictout;
   size_t ndictout;

   virDBusMessageEncode("a&{ss}",
                        ARRAY_CARDINALITY(dict) / 2,
                        dictin);
   virDBusMessageDecode("a&{ss}",
                        &ndictout,
                        &dictout);
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Convert the remote daemon auth check and the access control
code to use the common polkit API for checking auth.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Convert virAccessDriverPolkitFormatProcess to use typesafe API
for getting process ID attribute.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Update virNetServerClientCreateIdentity and virIdentityGetSystem
to use the new typesafe APIs for setting identity attributes
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Instead of requiring the caller to format to/from strings,
add typesafe APIs todo this work.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

There are now two places in libvirt which use polkit. Currently
they use pkexec, which is set to be replaced by direct DBus API
calls. Add a common API which they will both be able to use for
this purpose.

No tests are added at this time, since the impl will be gutted
in favour of a DBus API call shortly.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Format the segment offloading options specified by
<driver>
  <host .../>
  <guest .../>
</driver>
on virtio-net command line.

Add options for tuning segment offloading:
<driver>
  <host csum='off' gso='off' tso4='off' tso6='off'
        ecn='off' ufo='off'/>
  <guest csum='off' tso4='off' tso6='off' ecn='off' ufo='off'/>
</driver>
which control the respective host_ and guest_ properties
of the virtio-net device.

In nodeGetFreePages, if startCell is given by '0',
and the max node number is '0' too. The for-loop
wouldn't be executed.
So convert it to while-loop.

Before:
> virsh freepages --cellno 0 --pagesize 4
error: internal error: no suitable info found

After:
> virsh freepages --cellno 0 --pagesize 4
4KiB: 472637
Signed-off-by: NJincheng Miao <jmiao@redhat.com>
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

We don't accept any other values except '0'.
Signed-off-by: NChen Hanxiao <chenhanxiao@cn.fujitsu.com>

If you have a bridge network in running domain and libvirtd is restarted
the information about host bridge interface is lost from live xml.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1140085Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

Report also the name of the parent file and uid/gid used to access it to
help debugging broken storage configurations.

Request erroring out from the backing chain traveller and drop qemu's
internal backing chain integrity tester.

The backing chain traveller reports errors by itself with possibly more
detail than qemuDiskChainCheckBroken ever could.

We also need to make sure that we reconnect to existing qemu instances
even at the cost of losing the backing chain info (this really should be
stored in the XML rather than reloaded from disk, but that needs some
work).

Reuse virStorageSourceIsEmpty and rename "force" argument to
"force_probe".