This patch adds support for running qemu guests with the required
parameters to forcefully enable or disable BIOS advertising of S3 and
S4 states.  The support for this is added to capabilities and there is
also a qemu command parameter parsing implemented.

There is a new <pm/> element implemented that can control what ACPI
sleeping states will be advertised by BIOS and allowed to be switched
to by libvirt. The default keeps defaults on hypervisor, otherwise
forces chosen setting.
The documentation of the pm element is added as well.

A user reported this crash when using python bindings:

  File "/home/nox/workspace/NOX/src/NOX/hooks.py", line 134, in trigger
    hook.trigger(event)
  File "/home/nox/workspace/NOX/src/NOX/hooks.py", line 33, in trigger
    self.handlers[event]()
  File "/home/nox/workspace/NOX/hooks/volatility.py", line 81, in memory_dump
    for block in Memory(self.ctx):
  File "/home/see/workspace/NOX/src/NOX/lib/libtools.py", line 179, in next
    libvirt.VIR_MEMORY_PHYSICAL)
  File "/usr/lib/python2.7/dist-packages/libvirt.py", line 1759, in memoryPeek
    ret = libvirtmod.virDomainMemoryPeek(self._o, start, size, flags)
SystemError: error return without exception set

In the python bindings, returning NULL makes python think an
exception was thrown, while returning the None object lets the
wrappers know that a libvirt error exists.

Reported by Nox DaFox, fix suggested by Dan Berrange.

* python/libvirt-override.c (libvirt_virDomainBlockPeek)
(libvirt_virDomainMemoryPeek): Return python's None object, so
wrapper knows to check libvirt error.

Implementation of iolimits for the qemu driver with
capability probing for block size attribute and
command line generation for block sizes.
Including testcase for qemuxml2argvtest.
Signed-off-by: NViktor Mihajlovski <mihajlov@linux.vnet.ibm.com>

Introducing a new iolimits element allowing to override certain
properties of a guest block device like the physical and logical
block size.
This can be useful for platforms with 'non-standard' disk formats
like S390 DASD with its 4K block size.
Signed-off-by: NViktor Mihajlovski <mihajlov@linux.vnet.ibm.com>

Without this patch, logged command executions can be ambiguous if
the command contained any shell metacharacters.  This has caused
more than one person to attempt to patch clients to add unnecessary
quoting, without realizing that the command itself was run with
correct args, and only the logged output was ambiguous.

* src/util/command.c (virCommandToString): Add shell escapes.
* tests/commandtest.c (test16): Test new behavior.
* tests/commanddata/test16.log: Update expected output.
* tests/qemuxml2argvdata/qemuxml2argv-*.args: Likewise.
* tests/networkxml2argvdata/*.argv: Likewise.

Now that vshCommandRun() checks for the connection automaticaly, remove
all of the redundant checks in the code.

vshConnectionUsability() no longer needs to be exported and this patch
marks it static.

Almost each virsh command uses the function vshConnectionUsability
before doing anything, to check if the connection is "alive".  Commands
that don't need an conection are already conveniently marked with
VSH_CMD_FLAG_NOCONNECT. We can automaticaly check for the connection
before calling any remote command so we don't forget to do so.

This patch also upgrades the connection check to use virConnectIsAlive
along with the current approach.

After fixing the last review comments on remote port searching (commit
a14b4aea), the commit right after that
wasn't modified accordingly, therefore two values weren't changed as
they should and the configurable ports don't work as expected.

This simple commit changes last two values missed and fixes the issue.

It should be [] instead of ().

The codes were updated to allow to reset the device as long as
there is no devices/functions behind the same bus. However, the
comments were kept without touched.

* configure.ac docs/news.html.in libvirt.spec.in: update for release
* po/*.po*: pulled localization updates for sp,ja,mr,pa,uk,zh_CN,zh_TW
  and regenerated

To avoid backward compatibility issues, this patch suppresses
auto-generated DAC labels from XML. This change affects commands such as
dumpxml and save.
Signed-off-by: NMarcelo Cerri <mhcerri@linux.vnet.ibm.com>

With this patch libvirt tries to assign a model to a single seclabel
when model is missing. Libvirt will look up at host's capabilities and
assign the first model to seclabel.

This patch fixes:

1. The problem with existing guests that have a seclabel defined in its XML.
2. A XML parse error when a guest is restored.
Signed-off-by: NMarcelo Cerri <mhcerri@linux.vnet.ibm.com>

When executing virsh -t <command> the reported timing was off
by 3 orders of magnitude if the command took more than one
second.
Signed-off-by: NViktor Mihajlovski <mihajlov@linux.vnet.ibm.com>

When domain XML contains any of the elements for setting up CPU
scheduling parameters (period, quota, emulator_period, or
emulator_quota) we need cpu cgroup to enforce the configuration.
However, the existing code would just ignore silently such settings if
either cgroups were not available at all cpu cgroup was not available.
Moreover, APIs for manipulating CPU scheduler parameters were already
failing if cpu cgroup was not available. This patch makes cpu cgroup
mandatory for all domains that use CPU scheduling elements in their XML.

BZ: https://bugzilla.redhat.com/show_bug.cgi?id=837761

The variable max_id is initialized again in the step of
getting cpu mapping variable map2. But in the next for loop
we still expect original value of max_id, the bug will
crash libvirtd when using on NUMA machine with big number
of cpus.

On NUMA machine, the length of string got from file
cpuacct.usage_percpu is quite large, so expand the
limit of 1024 bytes.

errors like:
Failed to read file \
'/cgroup/cpuacct/libvirt/qemu/rhel6q/cpuacct.usage_percpu': \
Value too large for defined data type

Add correct closing tags.

Adapt the IP learning code to also accept broadcasted DHCP replies

Some DHCP servers send their DHCP replies to the broadcast MAC address
rather than to the MAC address of the VM. The existing DHCP snooping
code assumes that the reply always goes to the MAC address of the VM
thus filtering the traffic of some DHCP servers' replies.

The below patch adapts the code to

1) filter DHCP replies by comparing the MAC address in the reply against
   the MAC address of the VM (held in the snoop request)

2) adapts the pcap filter for traffic towards the VM to accept DHCP replies
   sent to any MAC address; for further filtering we rely on 1)

3) creates initial rules that are active while waiting for DHCP replies;
   these rules now accept DHCP replies to the VM's MAC address or to the
   MAC broadcast address

Add function for testing for Ethernet broadcast address

The introduction of the new VLAN code, along with the fix
from 5e465df6, caused the
addition of OVS ports to fail with the following message:

ovs-vsctl: 00002|vsctl|ERR|: missing column name

This fix takes into account the VLAN arguments are optional,
and correctly sets up the command line to run the "ovs-vsctl"
command to add ports to the OVS bridge.
Signed-off-by: NKyle Mestery <kmestery@cisco.com>
CC: Eric Blake <eblake@redhat.com>

Recent work to improve support for loadable driver modules introduced
a regression in the xen driver.  The legacy xen driver is now a
stateful, libvirtd driver but was not being registered when building
without driver modules.

A slight behavior change was also noted in the xen drivers when
built as driver modules.  Previously, explicitly specifying a
connection URI was not necessary, but now

Compiled against library: libvirt 0.10.0
Using library: libvirt 0.10.0
Using API: QEMU 0.10.0
error: failed to get the hypervisor version
error: internal error Cannot find suitable emulator for x86_64

The xen drivers need to be registered before the qemu driver since
the qemu driver will return success with a null connection URI.
This ordering is safe since the xen drivers will decline when not
running the xen kernel.

If a 8021.Qbh network device supports SRIOV and its VF is being used
in pci passthrough mode, when the guest is shutdown or destroyed, the
PF inteface is also brought down. qemuDomainHostdevNetConfigRestore()
finds out the PF for provided hostdev (which is VF) and passes it to
virNetDevPortProfileDisassociate() as linkdev. Later, linkdev gets passed
to virNetDevSetOnline() where the interface is brought down by clearing
IFF_UP flag.

Bringing down a PF, when only VF is being brought down is not expected
behavior. This patch adds a check so that virNetDevSetOnline() is called
only for PF and not if device is a VF.
Signed-off-by: NNishank Trivedi <nistrive@cisco.com>

The loop processing the trusted DHCP server generated one too
many rules and added one final rules that accepted responses
from all DHCP servers. Below patch fixes this.

Recent changes in the security driver discarded changes that fixed
labeling un-confined guests.

virDomainVcpuPinAdd does a realloc on vcpupin_list if the new vcpu pin
definition doesn't fit into the array. The list is an array of pointers
but the function definition didn't support returning the changed pointer
to the caller if it was realloced. This caused segfaults if realloc
would change the base pointer.

virDomainVcpuPinDefCopy when the control flow reaches out of memory
cleanup code, the flow would end in a infinite loop as the loop variable
wasn't decremented.

Also a dereference of NULL pointers was possible if allocation of the
Vcpu pinning definiton structure failed.

Commit d0c0e79a left behind some dead
code (hasDAC can't be efectively set to true, because
virSecurityManagerNew fails to load the "dac" driver).

This patch also enhances the condition for adding the default
auto-detected security manager if the manager array is allocated but
empty.

Also the configuration file for qemu driver still contains reference to
the DAC driver that can't be enabled manualy.

Before commit 05447e3a, qemuAgentCommand
blocked until it got a reply or appropriate event. When new parameter
was added to qemuAgentCommand in the above commit, all existing callers
of it were updated in a wrong way changing them from blocking to
5-seconds timeout.

The @timeout parameter of qemuAgentSend is both redundant and confusing.
This patch should not result in any functional changes.

This bug was revealed by the crash described in

  https://bugzilla.redhat.com/show_bug.cgi?id=852383

The vlan info pointer sent to virNetDevOpenvswitchAddPort should never
be non-NULL unless there is at least one tag. The factthat such a vlan
info pointer was receveid pointed out that a caller was passing the
wrong pointer. Instead of sending &net->vlan, the result of
virDomainNetGetActualVlan(net) should be sent - that function will
look for vlan info in net->data.network.actual->vlan, and in cany case
return NULL instead of a pointer if the vlan info it finds has no
tags.

Aside from causing the crash, sending a hardcoded &net->vlan has the
effect of ignoring vlan info from a <network> or <portgroup> config.

As pointed by Eric Blake

Fixup buffer usage when handling VLANs. Also fix the logic
used to determine if the virNetDevVlanPtr is valid or not.
Fixes crashes in the latest code when using Open vSwitch
virtualports.
Signed-off-by: NKyle Mestery <kmestery@cisco.com>

As the next boot doesn't have to worry about the previous numa
params setting (there is no).