To date, anyone performing a block copy and pivot ends up with
the destination being treated as <disk type='file'>.  While this
works for data access for a block device, it has at least one
noticeable shortcoming: virDomainGetBlockInfo() reports allocation
differently for block devices visited as files (the size of the
device) than for block devices visited as <disk type='block'>
(the maximum sector used, as reported by qemu); and this difference
is significant when trying to manage qcow2 format on block devices
that can be grown as needed.

Of course, the more powerful virDomainBlockCopy() API can already
express the ability to set the <disk> type.  But a new API can't
be backported, while a new flag to an existing API can; and it is
also rather inconvenient to have to resort to the full power of
generating XML when just adding a flag to the older call will do
the trick.  So this patch enhances blockcopy to let the user flag
when the resulting XML after the copy must list the device as
type='block'.

* include/libvirt/libvirt.h.in (VIR_DOMAIN_BLOCK_REBASE_COPY_DEV):
New flag.
* src/libvirt.c (virDomainBlockRebase): Document it.
* tools/virsh-domain.c (opts_block_copy, blockJobImpl): Add
--blockdev option.
* tools/virsh.pod (blockcopy): Document it.
* src/qemu/qemu_driver.c (qemuDomainBlockRebase): Allow new flag.
(qemuDomainBlockCopy): Remember the flag, and make sure it is only
used on actual block devices.
* tests/qemuxml2argvdata/qemuxml2argv-disk-mirror.xml: Test it.
Signed-off-by: NEric Blake <eblake@redhat.com>

Expose the new flag just added to virDomainGetBlockJobInfo.
With --raw, the presence or absence of --bytes determines which
flag to use in the single API call.  Without --raw, the use of
--bytes forces an error if the server doesn't support it,
otherwise, the code tries to silently fall back to scaling the
MiB/s value.

My goal is to eventually also support --bytes in bandwidth mode;
but that's a bit further down the road (and needs a new API flag
added in libvirt.h first).

This changes the human output, but the previous patch added
raw output precisely so that we can have flexibility with the
human output.  For this commit, I used qemu-monitor-command to
force an unusual bandwidth, but the same will be possible once
qemu implements virDomainBlockCopy:

Before:
Block Copy: [100 %]    Bandwidth limit: 2 MiB/s
After:
Block Copy: [100 %]    Bandwidth limit: 1048577 bytes/s (1.000 MiB/s)

The cache avoids having to repeatedly checking whether the flag
works when talking to an older server, when multiple blockjob
commands are issued during a batch session and the user is
manually polling for job completion.

* tools/virsh.h (_vshControl): Add a cache.
* tools/virsh.c (cmdConnect, vshReconnect): Initialize the cache.
* tools/virsh-domain.c (opts_block_job): Add --bytes.
* tools/virsh.pod (blockjob): Document this.
Signed-off-by: NEric Blake <eblake@redhat.com>

The current output of 'blockjob [--info]' is a single line
designed for human consumption; it's not very nice for machine
parsing.  Furthermore, I have plans to modify the line in
response to the new flag for controlling bandwidth units.
Solve that by adding a --raw parameter, which outputs
information closer to the C struct.

$ virsh blockjob testvm1 vda --raw
 type=Block Copy
 bandwidth=1
 cur=197120
 end=197120

The information is indented, because I'd like for a later patch
to add a mode that iterates over all the vm's disks with status
for each; in that mode, each block name would be listed unindented
before information (if any) about that block.

Now that we have a raw mode, we can guarantee that it won't change
format over time.  Any app that cares about parsing the output can
try --raw, and if it fails, know that it was talking to an older
virsh and fall back to parsing the human-readable format which had
not changed until now; meanwhile, when not using --raw, we have
freed future virsh to change the output to whatever makes sense.

My first change to human mode: this command now guarantees a line
is printed on successful use of the API, even when the API did
not find a current block job (consistent with the rest of virsh).

Bonus: https://bugzilla.redhat.com/show_bug.cgi?id=1135441
complained that this message was confusing:

$ virsh blockjob test1 hda  --async --bandwidth 10
error: conflict between --abort, --info, and --bandwidth modes

even though the man page already documents that --async implies
abort mode, all because '--abort' wasn't present in the command
line.  Since I'm adding another case where options are tied
to or imply a mode, I changed that error to:

error: conflict between abort, info, and bandwidth modes

* tools/virsh-domain.c (cmdBlockJob): Add --raw parameter; tweak
error wording.
* tools/virsh.pod (blockjob): Document it.
Signed-off-by: NEric Blake <eblake@redhat.com>

I have plans to make future enhancements to the job list mode,
which will be easier to do if the common blockJobImpl function
is not mixing a query command with multiple modify commands.
Besides, it just feels weird that all callers to blockJobImpl
had to supply both a bandwidth input argument (unused for info
mode) and an info output argument (unused for all other modes);
not to mention I just made similar cleanups on the libvirtd
side.

The only reason blockJobImpl returned int was because of info
mode returning -1/0/1 (all other job API are -1/0), so that
can also be cleaned up.  No user-visible changes in this commit.

* tools/virsh-domain.c (blockJobImpl): Change signature and return
value.  Drop info handling.
(cmdBlockJob): Handle info here.
(cmdBlockCommit, cmdBlockCopy, cmdBlockPull): Adjust callers.
Signed-off-by: NEric Blake <eblake@redhat.com>

While reviewing the new virDomainBlockCopy API, Peter Krempa
pointed out that our existing design of using MiB/s for block
job bandwidth is rather coarse, especially since qemu tracks
it in bytes/s; so virDomainBlockCopy only accepts bytes/s.
But once the new API is implemented for qemu, we will be in
the situation where it is possible to set a value that cannot
be accurately reflected back to the user, because the existing
virDomainGetBlockJobInfo defaults to the coarser units.

Fortunately, we have an escape hatch; and one that has already
served us well in the past: we can use the flags argument to
specify which scale to use (see virDomainBlockResize for prior
art).  This patch fixes the query side of the API; made easier
by previous patches that split the query side out from the
modification code.  Later patches will address the virsh
interface, as well retrofitting all other blockjob APIs to
also accept a flag for toggling bandwidth units.

* include/libvirt/libvirt.h.in (_virDomainBlockJobInfo)
(VIR_DOMAIN_BLOCK_COPY_BANDWIDTH): Document sizing issues.
(virDomainBlockJobInfoFlags): New enum.
* src/libvirt.c (virDomainGetBlockJobInfo): Document new flag.
* src/qemu/qemu_monitor.h (qemuMonitorBlockJobInfo): Add parameter.
* src/qemu/qemu_monitor.c (qemuMonitorBlockJobInfo): Likewise.
* src/qemu/qemu_monitor_json.h (qemuMonitorJSONBlockJobInfo):
Likewise.
* src/qemu/qemu_monitor_json.c (qemuMonitorJSONBlockJobInfo)
(qemuMonitorJSONGetBlockJobInfoOne): Likewise. Don't scale here.
* src/qemu/qemu_migration.c (qemuMigrationDriveMirror): Update
callers.
* src/qemu/qemu_driver.c (qemuDomainBlockPivot)
(qemuDomainBlockJobImpl): Likewise.
(qemuDomainGetBlockJobInfo): Likewise, and support new flag.
Signed-off-by: NEric Blake <eblake@redhat.com>

The previous patch hoisted some bounds checks to the callers;
but someone that is not aware of the hoisted check could now
try passing an integer between LLONG_MAX and ULLONG_MAX.  As a
safety measure, add new json conversion modes that let libvirt
error out early instead of pass bad numbers to qemu, if the
caller ever makes a mistake due to later refactoring.

Convert the various blockjob QMP calls to use the new modes,
and switch some of them to be optional (QMP has always supported
an omitted "speed" the same as "speed":0, for everything except
block-job-set-speed).

* src/qemu/qemu_monitor_json.c (qemuMonitorJSONMakeCommandRaw):
Add 'j'/'y' and 'J'/'Y' to error out on negative input.
(qemuMonitorJSONDriveMirror, qemuMonitorJSONBlockCommit)
(qemuMonitorJSONBlockJob): Use it.
Signed-off-by: NEric Blake <eblake@redhat.com>

qemu treats blockjob bandwidth as a 64-bit number, in the units
of bytes/second.  But we stupidly modeled block job bandwidth
after migration bandwidth, which in turn was an 'unsigned long'
and therefore subject to 32-bit vs. 64-bit interpretations, and
with a scale of MiB/s.  Our code already has to convert between
the two scales, and report overflow as appropriate; although
this conversion currently lives in the monitor code.  In fact,
our conversion code limited things to 63 bits, because we
checked against LLONG_MAX and reject what would be negative
bandwidth if treated as signed.

On the bright side, our use of MiB/s means that even with a
32-bit unsigned long, we still have no problem representing a
bandwidth of 2GiB/s, which is starting to be more feasible as
10-gigabit or even faster interfaces are used.  And once you
get past the physical speeds of existing interfaces, any larger
bandwidth number behaves the same - effectively unlimited.
But on the low side, the granularity of 1MiB/s tuning is rather
coarse.  So the new virDomainBlockJob API decided to go with
a direct 64-bit bytes/sec number instead of the scaled number
that prior blockjob APIs had used.  But there is no point in
rounding this number to MiB/s just to scale it back to bytes/s
for handing to qemu.

In order to make future code sharing possible between the old
virDomainBlockRebase and the new virDomainBlockCopy, this patch
moves the scaling and overflow detection into the driver code.
Several of the block job calls that can set speed are fed
through a common interface, so it was easier to adjust all block
jobs at once, for consistency.  This patch is just code motion;
there should be no user-visible change in behavior.

* src/qemu/qemu_monitor.h (qemuMonitorBlockJob)
(qemuMonitorBlockCommit, qemuMonitorDriveMirror): Change
parameter type and scale.
* src/qemu/qemu_monitor.c (qemuMonitorBlockJob)
(qemuMonitorBlockCommit, qemuMonitorDriveMirror): Move scaling
and overflow detection...
* src/qemu/qemu_driver.c (qemuDomainBlockJobImpl)
(qemuDomainBlockRebase, qemuDomainBlockCommit): ...here.
(qemuDomainBlockCopy): Use bytes/sec.
Signed-off-by: NEric Blake <eblake@redhat.com>

Another layer of overly-multiplexed code that deserves to be
split into obviously separate paths for query vs. modify.
This continues the cleanup started in commit cefe0ba3.

In the process, make some tweaks to simplify the logic when
parsing the JSON reply.  There should be no user-visible
semantic changes.

* src/qemu/qemu_monitor.h (qemuMonitorBlockJob): Drop parameter.
(qemuMonitorBlockJobInfo): New prototype.
(BLOCK_JOB_INFO): Drop enum.
* src/qemu/qemu_monitor_json.h (qemuMonitorJSONBlockJob)
(qemuMonitorJSONBlockJobInfo): Likewise.
* src/qemu/qemu_monitor.c (qemuMonitorBlockJob): Split...
(qemuMonitorBlockJobInfo): ...into second function.
* src/qemu/qemu_monitor_json.c (qemuMonitorJSONBlockJob): Move
block info portions...
(qemuMonitorJSONGetBlockJobInfo): ...here, and rename...
(qemuMonitorJSONBlockJobInfo): ...and export.
(qemuMonitorJSONGetBlockJobInfoOne): Alter return semantics.
* src/qemu/qemu_driver.c (qemuDomainBlockPivot)
(qemuDomainBlockJobImpl, qemuDomainGetBlockJobInfo): Adjust
callers.
* src/qemu/qemu_migration.c (qemuMigrationDriveMirror)
(qemuMigrationCancelDriveMirror): Likewise.
Signed-off-by: NEric Blake <eblake@redhat.com>

Commit fba6bc47 introduced support for the 'invtsc' feature,
which blocks migration. We should not include it in the
host-model CPU by default, because it's intended to be used
with migration.

https://bugzilla.redhat.com/show_bug.cgi?id=1138221

This commit is rather big. Firstly, the in memory config
representation is adjusted like if security_driver was set to "none".
The rest is then just adaptation to the new code that will generate
different seclabels.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

https://bugzilla.redhat.com/show_bug.cgi?id=1027096#c8

There are two ways in which security model can make it way into
<seclabel/>. One is as the @model attribute, the second one is
via security_driver knob in qemu.conf. Then, while parsing
<seclabel/> several checks and fix ups of old, stale combinations
are performed. However, iff @model is specified. They are not
done in the latter case. So it's still possible to feed libvirt
with senseless combinations (if qemu.conf is adjusted correctly).

One example of a seclabel that needs some adjustment (in case
security_driver=none in qemu.conf) is:

    <seclabel type='dynamic' relabel='yes'/>

The fixup code is copied from virSecurityLabelDefParseXML
(covering the former case) into virSecurityLabelDefsParseXML
(which handles the latter case).
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

The qemu implementation for virDomainGetBlockJobInfo() has a
minor bug: it grabs the qemu job with intent to QEMU_JOB_MODIFY,
which means it cannot be run in parallel with any other
domain-modifying command.  Among others, virDomainBlockJobAbort()
is such a modifying command, and it defaults to being
synchronous, and can wait as long as several seconds to ensure
that the job has actually finished.  Due to the job rules, this
means a user cannot obtain status about the job during that
timeframe, even though we know that some client management code
exists which is using a polling loop on status to see when a job
finishes.

This bug has been present ever since blockpull support was first
introduced (commit b976165c, v0.9.4 in Jul 2011), all because we
stupidly tried to cram too much multiplexing through a single
helper routine, but was made worse in 97c59b9c (v1.2.7) when
BlockJobAbort was fixed to wait longer.  It's time to disentangle
some of the mess in qemuDomainBlockJobImpl, and in the process
relax block job query to use QEMU_JOB_QUERY, since it can safely
be used in parallel with any long running modify command.

Technically, there is one case where getting block job info can
modify domain XML - we do snooping to see if a 2-phase job has
transitioned into the second phase, for an optimization in the
case of old qemu that lacked an event for the transition.  I
claim this optimization is safe (the jobs are all about modifying
qemu state, not necessarily xml state); but if it proves to be
a problem, we could use the difference between the capabilities
QEMU_CAPS_BLOCKJOB_{ASYNC,SYNC} to determine whether we even
need snooping, and only request a modifying job in the case of
older qemu.

* src/qemu/qemu_driver.c (qemuDomainBlockJobImpl): Move info
handling...
(qemuDomainGetBlockJobInfo): ...here, and relax job type.
(qemuDomainBlockJobAbort, qemuDomainBlockJobSetSpeed)
(qemuDomainBlockRebase, qemuDomainBlockPull): Adjust callers.
Signed-off-by: NEric Blake <eblake@redhat.com>

The existing virDomainBlockRebase code rejected the combination of
_RELATIVE and _COPY flags, but only by accident.  It makes sense
to add support for the combination someday, at least for the case
of _SHALLOW and not _REUSE_EXT; but to implement it, libvirt would
have to pre-create the file with a relative backing name, and I'm
not ready to code that in yet.

Meanwhile, the code to forward on to the block copy code is getting
longer, and reorganizing the function to have the block pull done
early makes it easier to add even more block copy prep code.

This patch should have no semantic difference other than the quality
of the error message on the unsupported flag combination.  Pre-patch:

error: unsupported flags (0x10) in function qemuDomainBlockCopy

Post-patch:

error: argument unsupported: Relative backing during copy not supported yet

* src/qemu/qemu_driver.c (qemuDomainBlockRebase): Reorder code,
and improve error message of relative copy.
Signed-off-by: NEric Blake <eblake@redhat.com>

Now that hanging brace offenders have been fixed, we can automate
the check, and document our style.  Done as a separate commit from
code changes, to make it easier to just backport code changes, if
that is ever needed.

* cfg.mk (sc_curly_braces_style): Catch hanging braces.
* docs/hacking.html.in: Document it.
* HACKING: Regenerate.
Signed-off-by: NEric Blake <eblake@redhat.com>

Our style overwhelmingly uses hanging braces (the open brace
hangs at the end of the compound condition, rather than on
its own line), with the primary exception of the top level function
body.  Fix the few remaining outliers, before adding a syntax
check in a later patch.

* src/interface/interface_backend_netcf.c (netcfStateReload)
(netcfInterfaceClose, netcf_to_vir_err): Correct use of { in
compound statement.
* src/conf/domain_conf.c (virDomainHostdevDefFormatSubsys)
(virDomainHostdevDefFormatCaps): Likewise.
* src/network/bridge_driver.c (networkAllocateActualDevice):
Likewise.
* src/util/virfile.c (virBuildPathInternal): Likewise.
* src/util/virnetdev.c (virNetDevGetVirtualFunctions): Likewise.
* src/util/virnetdevmacvlan.c
(virNetDevMacVLanVPortProfileCallback): Likewise.
* src/util/virtypedparam.c (virTypedParameterAssign): Likewise.
* src/util/virutil.c (virGetWin32DirectoryRoot)
(virFileWaitForDevices): Likewise.
* src/vbox/vbox_common.c (vboxDumpNetwork): Likewise.
* tests/seclabeltest.c (main): Likewise.
Signed-off-by: NEric Blake <eblake@redhat.com>

Done as a separate commit in case earlier cleanups are backported
independently.

* cfg.mk (sc_require_space_before_label): New rule.
Signed-off-by: NEric Blake <eblake@redhat.com>

I'm about to add a syntax check that enforces our documented
HACKING style of always using matching {} on if-else statements.

This patch focuses on all remaining problems, where there weren't
enough issues to warrant splitting it further.

* src/remote/remote_driver.c (doRemoteOpen): Correct use of {}.
* src/security/virt-aa-helper.c (vah_add_path, valid_path, main):
Likewise.
* src/rpc/virnetsocket.c (virNetSocketNewConnectLibSSH2):
Likewise.
* src/esx/esx_vi_types.c (esxVI_Type_FromString): Likewise.
* src/uml/uml_driver.c (umlDomainDetachDevice): Likewise.
* src/util/viralloc.c (virShrinkN): Likewise.
* src/util/virbuffer.c (virBufferURIEncodeString): Likewise.
* src/util/virdbus.c (virDBusCall): Likewise.
* src/util/virnetdev.c (virNetDevValidateConfig): Likewise.
* src/util/virnetdevvportprofile.c
(virNetDevVPortProfileGetNthParent): Likewise.
* src/util/virpci.c (virPCIDeviceIterDevices)
(virPCIDeviceWaitForCleanup)
(virPCIDeviceIsBehindSwitchLackingACS): Likewise.
* src/util/virsocketaddr.c (virSocketAddrGetNumNetmaskBits):
Likewise.
* src/util/viruri.c (virURIParseParams): Likewise.
* daemon/stream.c (daemonStreamHandleAbort): Likewise.
* tests/testutils.c (virtTestResult): Likewise.
* tests/cputest.c (cpuTestBaseline): Likewise.
* tools/virsh-domain.c (cmdDomPMSuspend): Likewise.
* tools/virsh-host.c (cmdNodeSuspend): Likewise.
* src/esx/esx_vi_generator.py (Type.generate_typefromstring):
Tweak generated code.
Signed-off-by: NEric Blake <eblake@redhat.com>

I'm about to add a syntax check that enforces our documented
HACKING style of always using matching {} on if-else statements.

This patch focuses on drivers that had several issues.

* src/lxc/lxc_fuse.c (lxcProcGetattr, lxcProcReadMeminfo): Correct
use of {}.
* src/lxc/lxc_driver.c (lxcDomainMergeBlkioDevice): Likewise.
* src/phyp/phyp_driver.c (phypConnectNumOfDomainsGeneric)
(phypUUIDTable_Init, openSSHSession, phypStoragePoolListVolumes)
(phypConnectListStoragePools, phypDomainSetVcpusFlags)
(phypStorageVolGetXMLDesc, phypStoragePoolGetXMLDesc)
(phypConnectListDefinedDomains): Likewise.
* src/vbox/vbox_common.c (vboxAttachSound, vboxDumpDisplay)
(vboxDomainRevertToSnapshot, vboxDomainSnapshotDelete): Likewise.
* src/vbox/vbox_tmpl.c (vboxStorageVolGetXMLDesc): Likewise.
Signed-off-by: NEric Blake <eblake@redhat.com>

I'm about to add a syntax check that enforces our documented
HACKING style of always using matching {} on if-else statements.

This patch focuses on code related to xen.

* src/libxl/libxl_conf.c (libxlCapsInitGuests)
(libxlMakeDomBuildInfo): Correct use of {}.
* src/xen/xen_hypervisor.c (virXen_getvcpusinfo)
(xenHypervisorMakeCapabilitiesInternal): Likewise.
* src/xen/xend_internal.c (xenDaemonOpen)
(xenDaemonDomainMigratePerform, xend_detect_config_version)
(xenDaemonDetachDeviceFlags, xenDaemonDomainMigratePerform)
(xenDaemonDomainBlockPeek): Likewise.
* src/xenapi/xenapi_driver.c (xenapiConnectListDomains)
(xenapiDomainLookupByUUID, xenapiDomainGetOSType): Likewise.
* src/xenconfig/xen_common.c (xenParseCPUFeatures, xenFormatNet):
Likewise.
* src/xenconfig/xen_sxpr.c (xenParseSxpr, xenFormatSxprNet)
(xenFormatSxpr): Likewise.
Signed-off-by: NEric Blake <eblake@redhat.com>

I'm about to add a syntax check that enforces our documented
HACKING style of always using matching {} on if-else statements.

This commit focuses on the qemu driver.

* src/qemu/qemu_command.c (qemuParseISCSIString)
(qemuParseCommandLineDisk, qemuParseCommandLine)
(qemuBuildSmpArgStr, qemuBuildCommandLine)
(qemuParseCommandLineDisk, qemuParseCommandLineSmp): Correct use
of {}.
* src/qemu/qemu_capabilities.c (virQEMUCapsProbeCPUModels):
Likewise.
* src/qemu/qemu_driver.c (qemuDomainCoreDumpWithFormat)
(qemuDomainRestoreFlags, qemuDomainGetInfo)
(qemuDomainMergeBlkioDevice): Likewise.
* src/qemu/qemu_hotplug.c (qemuDomainAttachNetDevice): Likewise.
* src/qemu/qemu_monitor_text.c (qemuMonitorTextCreateSnapshot)
(qemuMonitorTextLoadSnapshot, qemuMonitorTextDeleteSnapshot):
Likewise.
* src/qemu/qemu_process.c (qemuProcessStop): Likewise.
Signed-off-by: NEric Blake <eblake@redhat.com>

I'm about to add a syntax check that enforces our documented
HACKING style of always using matching {} on if-else statements.

This patch focuses on code shared between multiple drivers.

* src/conf/domain_conf.c (virDomainFSDefParseXML)
(virSysinfoParseXML, virDomainNetDefParseXML)
(virDomainWatchdogDefParseXML)
(virDomainRedirFilterUSBDevDefParseXML): Correct use of {}.
* src/conf/interface_conf.c (virInterfaceDefParseDhcp)
(virInterfaceDefParseIp, virInterfaceVlanDefFormat)
(virInterfaceDefParseStartMode, virInterfaceDefParseBondMode)
(virInterfaceDefParseBondMiiCarrier)
(virInterfaceDefParseBondArpValid): Likewise.
* src/conf/node_device_conf.c (virNodeDevCapStorageParseXML):
Likewise.
* src/conf/nwfilter_conf.c (virNWFilterRuleDetailsParse)
(virNWFilterRuleParse, virNWFilterDefParseXML): Likewise.
* src/conf/secret_conf.c (secretXMLParseNode): Likewise.
* src/cpu/cpu_x86.c (x86Baseline, x86FeatureLoad, x86ModelLoad):
Likewise.
* src/network/bridge_driver.c (networkKillDaemon)
(networkDnsmasqConfContents): Likewise.
* src/node_device/node_device_hal.c (dev_refresh): Likewise.
* src/nwfilter/nwfilter_gentech_driver.c (virNWFilterInstantiate):
Likewise.
* src/nwfilter/nwfilter_ebiptables_driver.c
(_iptablesCreateRuleInstance): Likewise.
* src/storage/storage_backend_disk.c
(virStorageBackendDiskBuildPool): Likewise.
Signed-off-by: NEric Blake <eblake@redhat.com>

We lacked of HOME environment variable,
set 'HOME=/' as default.

The kernel sets up $HOME for the init process.
Therefore any init can assume that $HOME is set.
libvirt currently violates that implicit rule.
Signed-off-by: NChen Hanxiao <chenhanxiao@cn.fujitsu.com>
Signed-off-by: NEric Blake <eblake@redhat.com>

libcap-ng >= 0.7.4 fails when it can't read /sys/kernel/cap_last_cap
and thus running a qemu guest fails.

Allow reading cap_last_cap in the libvirt-qemu apparmor abstraction.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Signed-off-by: NGiuseppe Scrivano <gscrivan@redhat.com>

When FIPS mode is on, gnutls_dh_params_generate2 will fail if 1024 is
specified as the prime's number of bits, a bigger value works in both
cases.
Signed-off-by: NGiuseppe Scrivano <gscrivan@redhat.com>

Memory is allocated for 'mnt_src' by VIR_STRDUP in the loop. Next
loop it will be allocated again. So we need to free 'mnt_src'
before continue the loop.
Signed-off-by: NWang Rui <moon.wangrui@huawei.com>

Need to free 'root' and 'opts' before 'return -1' if symlink fails.
Signed-off-by: NWang Rui <moon.wangrui@huawei.com>

If virSecurityManagerClearSocketLabel() fails, 'agent' won't
be freed before jumping to cleanup.
Signed-off-by: NWang Rui <moon.wangrui@huawei.com>

Need to free 'uri_out' on error path.
Signed-off-by: NWang Rui <moon.wangrui@huawei.com>

If the condition 'ret < 0' is true, the code will jump to
'cleanup' and 'conf' won't be freed.
Signed-off-by: NWang Rui <moon.wangrui@huawei.com>

Coverity determined that 'log' and 'newenv' were not freed in
some cases. Free them in 'error' branch and normal branch.
Signed-off-by: NWang Rui <moon.wangrui@huawei.com>

Add testsuite coverage for the recent commit 0e1a1a8c.

* tests/commandhelper.c (main): Output umask.
* tests/commandtest.c (test15): Also test umask.
(mymain): Add test.
* tests/commanddata/*.log: Update expected output.
Signed-off-by: NEric Blake <eblake@redhat.com>

Commit 0e1a1a8c introduced umask for virCommand, but the variables
used emit a warning on older compilers about shadowed global
declaration.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

https://bugzilla.redhat.com/show_bug.cgi?id=1136788Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

Add umask to _virCommand, allow user to set umask to command.
Set umask(002) to qemu process to overwrite the default umask
of 022 set by many distros, so that unix sockets created for
virtio-serial has expected permissions.

Fix problem reported here:
https://sourceware.org/bugzilla/show_bug.cgi?id=13078#c11
https://bugzilla.novell.com/show_bug.cgi?id=888166

To use virtio-serial device, unix socket created for chardev with
default umask(022) has insufficient permissions.
e.g.:
-device virtio-serial \
-chardev socket,path=/tmp/foo,server,nowait,id=foo \
-device virtserialport,chardev=foo,name=org.fedoraproject.port.0

srwxr-xr-x 1 qemu qemu 0 21. Jul 14:19 /tmp/somefile.sock

Other users in the same group (like real user, test engines, etc)
cannot write to this socket.
Signed-off-by: NChunyan Liu <cyliu@suse.com>
Signed-off-by: NEric Blake <eblake@redhat.com>

%systemd_preun macro cannot be split into several lines.

https://bugzilla.redhat.com/show_bug.cgi?id=1136736Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

The 'elem' variable along with the domain object would be leaked when
taking the error path.

Found by coverity.

Currently, there is one flag passed in during macvtap creation
(withTap) -- Let's convert this field to an unsigned int flag
field for future expansion.
Signed-off-by: NMatthew Rosato <mjrosato@linux.vnet.ibm.com>
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

https://bugzilla.redhat.com/show_bug.cgi?id=1135388

Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>