* tests/qemuxml2argvtest.c (testCompareXMLToArgvFiles): Handle malloc
failure.

* src/qemu/qemu_driver.c (qemuInitPasswords): Free pass-phrase buffer.

* src/qemu/qemu_monitor_text.c (qemuMonitorTextAddDevice): Free the
device name buffer.

* python/libvirt-override.c (libvirt_virConnectBaselineCPU): Don't leak
the xmlcpus buffer upon encountering a non-string list element.

* src/vbox/vbox_tmpl.c (vboxDomainDumpXML): Free vboxCallback buffer
upon OOM.

* src/conf/node_device_conf.c (virNodeDevCapScsiHostParseXML):
Free the "nodes" buffer allocated by virXPathNodeSet.

* src/uml/uml_driver.c (umlMonitorCommand): This function would
sometimes return -1, yet fail to free the "reply" it had allocated.
Hence, no caller would know to free the corresponding argument.
When returning -1, be sure to free all allocated resources.

* src/vbox/vbox_tmpl.c (vboxDomainDumpXML): Free def.
Improved by Matthias Bolte.

* src/openvz/openvz_conf.c (openvzFreeDriver): Also free driver buffer.
Based on a suggestion from Matthias Bolte.

* src/storage/storage_backend_mpath.c (virStorageBackendIsMultipath):
The result of dm_get_next_target was never used (and isn't needed),
so don't store it.

Similar to the Set*Mem commands, this implementation was bogus and
misleading. Make it clear this is a hotplug only operation, and that the
hotplug piece isn't even implemented.

Also drop the overkill maxvcpus validation: we don't perform this check
at XML define time so clearly no one is missing it, and there is
always the risk that our info will be out of date, possibly preventing
legitimate CPU values.
Signed-off-by: NCole Robinson <crobinso@redhat.com>

SetMem and SetMaxMem are hotplug only APIs, any persistent config
changes are supposed to go via XML definition. The original implementation
of these calls were incorrect and had the nasty side effect of making
a psuedo persistent change that would be lost after libvirtd restart
(I didn't know any better).

Fix these APIs to rightly reject non running domains.
Signed-off-by: NCole Robinson <crobinso@redhat.com>

The plain QEMU tree does not include 'thread_id' in the JSON
output. Thus we need to treat it as non-fatal if missing.

* src/qemu/qemu_monitor_json.c: Treat missing thread_id as non-fatal

A typo in the check for the primary IDE controller could cause
a crash on restore depending on the exact guest config.

* src/qemu/qemu_conf.c: Fix s/video/controller/ typo & slot
  number typo

Current error reporting for JSON mode returns the full JSON
command string and full JSON error string. This is not very
user friendly, so this change makes the error report only
contain the basic command name, and friendly error message
description string. The full JSON data is logged instead.

* src/qemu/qemu_monitor_json.c: Always return the 'desc' field from
  the JSON error message to users.

When in JSON mode, QEMU requires that 'qmp_capabilities' is run as
the first command in the monitor. This is a no-op when run in the
text mode monitor

* src/qemu/qemu_driver.c: Run capabilities negotiation when
  connecting to the monitor
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h,
  src/qemu/qemu_monitor_json.c, src/qemu/qemu_monitor_json.h: Add
  support for the 'qmp_capabilities' command, no-op in text mode.

* docs/schemas/domain.rng: extends the domain xml schema to support the
  new interface type 'direct'

This part adds support for qemu making a macvtap tap device available
via file descriptor passed to qemu command line. This also attempts to
tear down the macvtap device when a VM terminates. This includes support
for attachment and detachment to/from running VM.
* src/qemu/qemu_conf.[ch] src/qemu/qemu_driver.c: add support in the
  QEmu driver

This part adds the helper code to setup and tear down macvtap devices
using direct communication with the device driver via netlink sockets.
The rather short messages received from the netlink layer are now
written into a dynamically allocated buffer

* src/util/macvtap.h src/util/macvtap.c: provides the new module
* po/POTFILES.in: the module contains translated strings

This part adds support to domain_conf.{c|h} for parsing the new
interface XML of type 'direct'. The parsed mode is now stored as
an int.
* src/conf/domain_conf.c src/conf/domain_conf.h: extend parsing code
* src/util/macvtap.h: empty header to not break compilation

This patch adds build support for libvirt checking for certain contents
of /usr/include/linux/if_link.h to see whether macvtap support is
compilable on that system. One can disable macvtap support in libvirt
via --without-macvtap passed to configure.
* configure.ac src/Makefile.am: new build support
* src/libvirt_macvtap.syms: list of exported symbols
* src/util/macvtap.c: empty module to not break compilation

The open function returned -1 in case of an error, but -1 maps
to VIR_DRV_OPEN_DECLINED instead of VIR_DRV_OPEN_ERROR.

The virRaiseError macro inside of virSecurityReportError expands to
virRaiseErrorFull and includes the __FILE__, __FUNCTION__ and __LINE__
information. But this three values are always the same for every call
to virSecurityReportError and do not reflect the actual error context.

Converting virSecurityReportError into a macro results in getting the
correct __FILE__, __FUNCTION__ and __LINE__ information.

Current PCI addresses are allocated at time of VM startup.
To make them truely persistent, it is neccessary to do this
at time of virDomainDefine/virDomainCreate. The code in
qemuStartVMDaemon still remains in order to cope with upgrades
from older libvirt releases

* src/qemu/qemu_driver.c: Rename existing qemuAssignPCIAddresses
  to qemuDetectPCIAddresses. Add new qemuAssignPCIAddresses which
  does auto-allocation upfront. Call qemuAssignPCIAddresses from
  qemuDomainDefine and qemuDomainCreate to assign PCI addresses that
  can then be persisted. Don't clear PCI addresses at shutdown if
  they are intended to be persistent

If giving a lxc://  URI instead of lxc:/// the open method
would crash ona NULL pointer

* src/lxc/lxc_driver.c: Cope with a NULL URI path

* src/util/hostusb.c: The device path for a USB device wants the
  bus/device IDs in decimal not octal

The old text mode monitor prompts for a password when disks are
encrypted. This interactive approach doesn't work for JSON mode
monitor. Thus there is a new 'block_passwd' command that can be
used.

* src/qemu/qemu_driver.c: Split out code for looking up a disk
  secret from findVolumeQcowPassphrase, into a new method
  getVolumeQcowPassphrase. Enhance qemuInitPasswords() to also
  set the disk encryption password via the monitor
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h,
  src/qemu/qemu_monitor_json.c, src/qemu/qemu_monitor_json.h,
  src/qemu/qemu_monitor_text.c, src/qemu/qemu_monitor_text.h: Add
  support for the 'block_passwd' monitor command.

Baseline CPU is the best CPU which can be used for a guest on any of the
hosts.

Broken by the latest commits to remove the virConnectPtr parameter
from internal functions.

Since c26cb923, the dname
parameter has been ignored by these two functions.  Use it.
* src/qemu/qemu_driver.c (qemudDomainMigratePrepareTunnel): Honor dname
parameter once again.
(qemudDomainMigratePrepare2): Likewise.

* src/conf/storage_conf.c (virStoragePoolDefParseSourceString):
* src/storage/storage_backend_fs.c:
(virStorageBackendFileSystemNetFindPoolSourcesFunc):
(virStorageBackendFileSystemNetFindPoolSources):
* src/test/test_driver.c (testStorageFindPoolSources):

* src/remote/remote_driver.c (doRemoteOpen): Don't leak a qparam_set
buffer upon OOM error.

Signed-off-by: NJiri Denemark <jdenemar@redhat.com>