Improve log messages issued when encountering a bogus
message length to include the actual length and the
limit violated

* src/rpc/virnetmessage.c: Improve log messages

On stream completion it is neccessary to send back a
message with an empty payload. The message header was
not being filled out correctly, since we were not writing
any payload. Add a method for encoding an empty payload
which updates the message headers correctly.

* src/rpc/virnetmessage.c, src/rpc/virnetmessage.h: Add
  a virNetMessageEncodePayloadEmpty method
* src/rpc/virnetserverprogram.c: Write empty payload on
  stream completion

The RPC client treats failure to register a socket watch
as non-fatal, since we do not mandate that a libvirt client
application provide an event loop implementation. It is
thus inappropriate to a log a message at VIR_LOG_WARN

* src/rpc/virnetsocket.c: Lower logging level

If a streams error is raised, virNetClientIOEventLoop
returns 0, but an error is set. Check for this and
propagate it if present

* src/rpc/virnetclient.c: Propagate streams error

This guts the libvirtd daemon, removing all its networking and
RPC handling code. Instead it calls out to the new virServerPtr
APIs for all its RPC & networking work

As a fallout all libvirtd daemon error reporting now takes place
via the normal internal error reporting APIs. There is no need
to call separate error reporting APIs in RPC code, nor should
code use VIR_WARN/VIR_ERROR for reporting fatal problems anymore.

* daemon/qemu_dispatch_*.h, daemon/remote_dispatch_*.h: Remove
  old generated dispatcher code
* daemon/qemu_dispatch.h, daemon/remote_dispatch.h: New dispatch
  code
* daemon/dispatch.c, daemon/dispatch.h: Remove obsoleted code
* daemon/remote.c, daemon/remote.h: Rewrite for new dispatch
  APIs
* daemon/libvirtd.c, daemon/libvirtd.h: Remove all networking
  code
* daemon/stream.c, daemon/stream.h: Update for new APIs
* daemon/Makefile.am: Link to libvirt-net-rpc-server.la

This guts the current remote driver, removing all its networking
handling code. Instead it calls out to the new virClientPtr and
virClientProgramPtr APIs for all RPC & networking work.

* src/Makefile.am: Link remote driver with generic RPC code
* src/remote/remote_driver.c: Gut code, replacing with RPC
  API calls
* src/rpc/gendispatch.pl: Update for changes in the way
  streams are handled

Move the daemon/remote_generator.pl to src/rpc/gendispatch.pl
and move the src/remote/rpcgen_fix.pl to src/rpc/genprotocol.pl

* daemon/Makefile.am: Update for new name/location of generator
* src/Makefile.am: Update for new name/location of generator

To facilitate creation of new clients using XDR RPC services,
pull alot of the remote driver code into a set of reusable
objects.

 - virNetClient: Encapsulates a socket connection to a
   remote RPC server. Handles all the network I/O for
   reading/writing RPC messages. Delegates RPC encoding
   and decoding to the registered programs

 - virNetClientProgram: Handles processing and dispatch
   of RPC messages for a single RPC (program,version).
   A program can register to receive async events
   from a client

 - virNetClientStream: Handles generic I/O stream
   integration to RPC layer

Each new client program now merely needs to define the list of
RPC procedures & events it wants and their handlers. It does
not need to deal with any of the network I/O functionality at
all.

Allow RPC servers to advertise themselves using MDNS,
via Avahi

* src/rpc/virnetserver.c, src/rpc/virnetserver.h: Allow
  registration of MDNS services via avahi
* src/rpc/virnetserverservice.c, src/rpc/virnetserverservice.h: Add
  API to fetch the listen port number
* src/rpc/virnetsocket.c, src/rpc/virnetsocket.h: Add API to
  fetch the local port number
* src/rpc/virnetservermdns.c, src/rpc/virnetservermdns.h: Represent
  an MDNS advertisement

To facilitate creation of new daemons providing XDR RPC services,
pull a lot of the libvirtd daemon code into a set of reusable
objects.

 * virNetServer: A server contains one or more services which
   accept incoming clients. It maintains the list of active
   clients. It has a list of RPC programs which can be used
   by clients. When clients produce a complete RPC message,
   the server passes this onto the corresponding program for
   handling, and queues any response back with the client.

 * virNetServerClient: Encapsulates a single client connection.
   All I/O for the client is handled, reading & writing RPC
   messages.

 * virNetServerProgram: Handles processing and dispatch of
   RPC method calls for a single RPC (program,version).
   Multiple programs can be registered with the server.

 * virNetServerService: Encapsulates socket(s) listening for
   new connections. Each service listens on a single host/port,
   but may have multiple sockets if on a dual IPv4/6 host.

Each new daemon now merely has to define the list of RPC procedures
& their handlers. It does not need to deal with any network related
functionality at all.

This extends the basic virNetSocket APIs to allow them to have
a handle to the TLS/SASL session objects, once established.
This ensures that any data reads/writes are automagically
passed through the TLS/SASL encryption layers if required.

* src/rpc/virnetsocket.c, src/rpc/virnetsocket.h: Wire up
  SASL/TLS encryption

This provides two modules for handling SASL

 * virNetSASLContext provides the process-wide state, currently
   just a whitelist of usernames on the server and a one time
   library init call

 * virNetTLSSession provides the per-connection state, ie the
   SASL session itself. This also include APIs for providing
   data encryption/decryption once the session is established

* src/Makefile.am: Add to libvirt-net-rpc.la
* src/rpc/virnetsaslcontext.c, src/rpc/virnetsaslcontext.h: Generic
  SASL handling code

This provides two modules for handling TLS

 * virNetTLSContext provides the process-wide state, in particular
   all the x509 credentials, DH params and x509 whitelists
 * virNetTLSSession provides the per-connection state, ie the
   TLS session itself.

The virNetTLSContext provides APIs for validating a TLS session's
x509 credentials. The virNetTLSSession includes APIs for performing
the initial TLS handshake and sending/recving encrypted data

* src/Makefile.am: Add to libvirt-net-rpc.la
* src/rpc/virnettlscontext.c, src/rpc/virnettlscontext.h: Generic
  TLS handling code

Introduces a simple wrapper around the raw POSIX sockets APIs
and name resolution APIs. Allows for easy creation of client
and server sockets with correct usage of name resolution APIs
for protocol agnostic socket setup.

It can listen for UNIX and TCP stream sockets.

It can connect to UNIX, TCP streams directly, or indirectly
to UNIX sockets via an SSH tunnel or external command

* src/Makefile.am: Add to libvirt-net-rpc.la
* src/rpc/virnetsocket.c, src/rpc/virnetsocket.h: Generic
  sockets APIs
* tests/Makefile.am: Add socket test
* tests/virnetsockettest.c: New test case
* tests/testutils.c: Avoid overriding LIBVIRT_DEBUG settings
* tests/ssh.c: Dumb helper program for SSH tunnelling tests

This provides a new struct that contains a buffer for the RPC
message header+payload, as well as a decoded copy of the message
header. There is an API for applying a XDR encoding & decoding
of the message headers and payloads. There are also APIs for
maintaining a simple FIFO queue of message instances.

Expected usage scenarios are:

To send a message

   msg = virNetMessageNew()

   ...fill in msg->header fields..
   virNetMessageEncodeHeader(msg)
   ...loook at msg->header fields to determine payload filter
   virNetMessageEncodePayload(msg, xdrfilter, data)
   ...send msg->bufferLength worth of data from buffer

To receive a message

   msg = virNetMessageNew()
   ...read VIR_NET_MESSAGE_LEN_MAX of data into buffer
   virNetMessageDecodeLength(msg)
   ...read msg->bufferLength-msg->bufferOffset of data into buffer
   virNetMessageDecodeHeader(msg)
   ...look at msg->header fields to determine payload filter
   virNetMessageDecodePayload(msg, xdrfilter, data)
   ...run payload processor

* src/Makefile.am: Add to libvirt-net-rpc.la
* src/rpc/virnetmessage.c, src/rpc/virnetmessage.h: Internal
  message handling API.
* testutils.c, testutils.h: Helper for printing binary differences
* virnetmessagetest.c: Validate all XDR encoding/decoding

This patch defines the basics of a generic RPC protocol in XDR.
This is wire ABI compatible with the original remote_protocol.x.
It takes everything except for the RPC calls / events from that
protocol

 - The basic header virNetMessageHeader (aka remote_message_header)
 - The error object virNetMessageError  (aka remote_error)
 - Two dummy objects virNetMessageDomain & virNetMessageNetwork
   sadly needed to keep virNetMessageError ABI compatible with
   the old remote_error

The RPC protocol supports method calls, async events and
bidirectional data streams as before

* src/Makefile.am: Add rules for generating RPC code from
  protocol & define a new libvirt-net-rpc.la helper library
* src/rpc/virnetprotocol.x: New generic RPC protocol