Similarly to deprecating close(), I am now deprecating fclose() and
introduce VIR_FORCE_FCLOSE() and VIR_FCLOSE(). Also, fdopen() is replaced with
VIR_FDOPEN().

Most of the files are opened in read-only mode, so usage of
VIR_FORCE_CLOSE() seemed appropriate. Others that are opened in write
mode already had the fclose()<  0 check and I converted those to
VIR_FCLOSE()<  0.

I did not find occurrences of possible double-closed files on the way.

Using automated replacement with sed and editing I have now replaced all
occurrences of close() with VIR_(FORCE_)CLOSE() except for one, of
course. Some replacements were straight forward, others I needed to pay
attention. I hope I payed attention in all the right places... Please
have a look. This should have at least solved one more double-close
error.

- a pure typo error and a wrong command referenced in an error message.

The virConnectPtr is no longer required for error reporting since
that is recorded in a thread local. Remove use of virConnectPtr
from all APIs in storage_conf.{h,c} and storage_encryption_conf.{h,c}
and update all callers to match

It was used for error reporting only.

* src/qemu/qemu_monitor_text.c (qemuMonitorTextGetAllPCIAddresses):
Use %s.
* src/storage/storage_backend_iscsi.c (virStorageBackendCreateIfaceIQN):
Likewise.
* tools/virsh.c (cmdSecretSetValue): Likewise.

Allows the initiator to use a variety of IQNs rather than just the
system IQN when creating iSCSI pools.
* docs/schemas/storagepool.rng: extends the syntax with <iqn name="..."/>
* src/conf/storage_conf.[ch]: read and stores the iqn name
* src/storage/storage_backend_iscsi.[ch]: implement the IQN selection
  when detected

* daemon/qemud.c, src/Makefile.am: Adapt for changed paths
* src/storage*.c, src/storage/*.h, src/parthelpre.c: Move
  to src/storage/

* src/uml_conf.c (VIR_FROM_THIS): Define to VIR_FROM_UML.
* src/xs_internal.c (VIR_FROM_THIS): Define to VIR_FROM_XEN.
* src/xml.c (VIR_FROM_THIS): Define to VIR_FROM_XML.
* src/stats_linux.c (VIR_FROM_THIS): Define to VIR_FROM_STATS_LINUX.
* src/datatypes.c (VIR_FROM_THIS): Define to VIR_FROM_NONE.
* src/lxc_conf.c (VIR_FROM_THIS): Define to VIR_FROM_LXC.
* src/libvirt.c (VIR_FROM_THIS): Define to VIR_FROM_NONE.
* src/node_device_conf.c (VIR_FROM_THIS): Define to VIR_FROM_NODEDEV.
* src/openvz_conf.c (VIR_FROM_THIS): Define to VIR_FROM_OPENVZ.
* src/openvz_driver.c (VIR_FROM_THIS): Define to VIR_FROM_OPENVZ.
* src/conf.c (VIR_FROM_THIS): Define to VIR_FROM_CONF.
Note: this loses config_filename:config_lineno diagnostics,
but that's ok.
* src/node_device.c (VIR_FROM_THIS): Define to VIR_FROM_NODEDEV.
* src/sexpr.c (VIR_FROM_THIS): Define to VIR_FROM_SEXPR.
* po/POTFILES.in: remove src/sexpr.c and src/lxc_conf.c

really should be synchronizing against udev.  This is generally done by a call
to udevsettle, which is exactly what this patch implements for the storage
backends that are likely to create new /dev nodes.  I believe I've read that
even after udevsettle, you are not guaranteed that devices are all the way
created, so we still need the polling in the rest of the sources, but this
should give us a much better chance of things existing as we expect.
Signed-off-by: NChris Lalancette <clalance@redhat.com>

ability to resolve any kind of volume path to the pool target volume
path.  For instance, if the pool was defined with a
<target><path>/dev/disk/by-id</path></target> section, and one of the
volumes is /dev/disk/by-id/scsi-S_beaf11, then you would be able to
call virStorageVolLookupByPath("/dev/sdc"), and get the correct volume
back.
Signed-off-by: NChris Lalancette <clalance@redhat.com>

iSCSI volumes.  This is implemented in the
virStorageBackendUpdateVolInfoFD function, so all future callers will
automatically benefit.  This is a somewhat large patch because the
conversion of the virStorageBackendPartTableTypeToString necessitated
a change to the formatToString and formatFromString function pointers,
which caused fallout in other places in the storage stuff.  The good
news is that most of these callers are now converted over to the
VIR_ENUM_IMPL, which means a lot of redundant code is now gone.
Signed-off-by: NChris Lalancette <clalance@redhat.com>

to only rely on sysfs for finding LUNs, given a session number.  Along the way,
it also fixes the bug where we wouldn't find LUNs for older kernels (with the
block:sda format), and also fixes a race condition where we could try
to find the LUN before udev has finished connecting it.

This patch fixes a few different bugs:
1) We weren't finding LUNs on pre 2.6.24 kernels
2) libvirtd sysfs scanning was racing with udev, so we didn't always see LUNs
3) We weren't showing the 0'th LUN, although that can be a valid LUN
Signed-off-by: NChris Lalancette <clalance@redhat.com>

first logging in; we don't need to do it for logout.  Move the sendtarget
command into the Login() function.
Signed-off-by: NChris Lalancette <clalance@redhat.com>

--mode session" command.  However, just running "iscsiadm --mode session" seems
to work on all version of iscsiadm commands back to FC-6, so just use that.
Signed-off-by: NChris Lalancette <clalance@redhat.com>

*not* virStorageReportError() if the fork()/exec() process it spawned returned a
!= 0 exit code.  Rather, it returns the exitcode in this case, and it is up to
the higher level to determine whether this is a fatal error or not.  The use
case for this change is in the iSCSI stuff; older versions of iscsiadm tools
would return a failure when getting the session number, despite the command
succeeding.
Signed-off-by: NChris Lalancette <clalance@redhat.com>

	* qemud/internal.h, qemud/qemud.h: Rename this file so it
	doesn't conflict with src/internal.h.
	* HACKING: Document how header files should be used.
	* qemud/Makefile.am: Add src/ directory to includes.
	* qemud/event.c, qemud/mdns.c, qemud/qemud.c, qemud/remote.c,
	qemud/remote_protocol.c, qemud/remote_protocol.h,
	qemud/remote_protocol.x, src/buf.c, src/libvirt.c,
	src/nodeinfo.c, src/qemu_conf.c, src/qemu_driver.c,
	src/stats_linux.c, src/storage_backend.c, src/storage_backend_fs.c,
	src/storage_backend_iscsi.c, src/storage_backend_logical.c,
	src/storage_conf.c, src/storage_driver.c, src/util.c,
	src/util.h, src/virsh.c, src/virterror.c, src/xend_internal.c,
	src/xml.c, tests/reconnect.c, tests/xmlrpctest.c,
	tests/qparamtest.c: Standardize	use of header files.
	* docs/*, po/*: Rebuild docs.

Done with these commands:
git grep -l Local.variab|xargs \
  perl -0x3b -pi -e 's,\n+/\*\n \* vim:(.|\n)*,\n,'

git grep -l Local.variab|xargs \
  perl -0x3b -pi -e 's,\n+/\*\n \* Local variables:\n(.|\n)*,\n,'

* src/storage_backend_iscsi.c: patch from Chris Lalancette to improve
  support with older versions of iscsiadm.
Daniel

	* src/storage_backend_iscsi.c: Make iSCSI login actually work
	  (Chris Lalancette).

Avoid warnings like this:
file:nnn:format not a string literal and no format arguments

* qemud/qemud.c: Insert a "%s" format argument.
* qemud/remote.c: Likewise.
* src/iptables.c: Likewise.
* src/qemu_driver.c: Likewise.
* src/storage_backend.c: Likewise.
* src/storage_backend_fs.c: Likewise.
* src/storage_backend_iscsi.c Likewise.
* src/storage_backend_logical.c: Likewise.
* src/storage_conf.c: Likewise.
* src/storage_driver.c: Likewise.