- 08 12月, 2015 2 次提交
-
-
由 Daniel P. Berrange 提交于
The virtlogd RPC messages all have a flags parameter. For sake of future error reporting we should be verifying these are all 0 for now. Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
-
由 Daniel P. Berrange 提交于
The current virtlogd RPC protocol provides the ability to handle log files associated with QEMU stdout/err. The log protocol messages take the virt driver, domain name and use that to form a log file path. This is quite restrictive as it prevents us re-using the same RPC protocol messages for logging to char device backends where the filename can be arbitrarily user specified. It is also bad because it means we have 2 separate locations which have to decide on logfile name. This change alters the RPC protocol so that we pass the desired log file path along when opening the log file initially. Now the virt driver is exclusively in charge of deciding the log filename Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
-
- 27 11月, 2015 1 次提交
-
-
由 Guido Günther 提交于
Otherwise we fail on 32bit with: CC logging/virtlogd-log_daemon_dispatch.o logging/log_daemon_dispatch.c: In function 'virLogManagerProtocolDispatchDomainReadLogFile': logging/log_daemon_dispatch.c:120:9: error: format '%zu' expects argument of type 'size_t', but argument 7 has type 'uint64_t' [-Werror=format]
-
- 26 11月, 2015 2 次提交
-
-
由 Daniel P. Berrange 提交于
Define a new RPC protocol for the virtlogd daemon that provides for handling of logs. The initial RPC method defined allows a client to obtain a file handle to use for writing to a log file for a guest domain. The file handle passed back will not actually refer to the log file, but rather an anonymous pipe. The virtlogd daemon will forward I/O between them, ensuring file rotation happens when required. Initially the log setup is hardcoded to cap log files at 128 KB, and keep 3 backups when rolling over, which gives a max usage of 512 KB per guest. Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
-
由 Daniel P. Berrange 提交于
Copy the virtlockd codebase across to form the initial virlogd code. Simple search & replace of s/lock/log/ and gut the remote protocol & dispatcher. This gives us a daemon that starts up and listens for connections, but does nothing with them. Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
-
- 13 12月, 2012 1 次提交
-
-
由 Daniel P. Berrange 提交于
Introduce a lock_daemon_dispatch.c file which implements the server side dispatcher the RPC APIs previously defined in the lock protocol. Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
-
- 21 9月, 2012 1 次提交
-
-
由 Eric Blake 提交于
https://www.gnu.org/licenses/gpl-howto.html recommends that the 'If not, see <url>.' phrase be a separate sentence. * tests/securityselinuxhelper.c: Remove doubled line. * tests/securityselinuxtest.c: Likewise. * globally: s/; If/. If/
-
- 23 7月, 2012 1 次提交
-
-
由 Osier Yang 提交于
Per the FSF address could be changed from time to time, and GNU recommends the following now: (http://www.gnu.org/licenses/gpl-howto.html) You should have received a copy of the GNU General Public License along with Foobar. If not, see <http://www.gnu.org/licenses/>. This patch removes the explicit FSF address, and uses above instead (of course, with inserting 'Lesser' before 'General'). Except a bunch of files for security driver, all others are changed automatically, the copyright for securify files are not complete, that's why to do it manually: src/security/security_selinux.h src/security/security_driver.h src/security/security_selinux.c src/security/security_apparmor.h src/security/security_apparmor.c src/security/security_driver.c
-
- 10 3月, 2010 1 次提交
-
-
由 Eric Blake 提交于
* global: patch created by running: for f in $(git ls-files '*.[ch]') ; do cppi $f > $f.t && mv $f.t $f done
-
- 21 9月, 2009 1 次提交
-
-
由 Daniel P. Berrange 提交于
* daemon/qemud.c, src/Makefile.am: Adapt for changed paths * src/storage*.c, src/storage/*.h, src/parthelpre.c: Move to src/storage/
-
- 11 4月, 2008 1 次提交
-
-
由 Jim Meyering 提交于
Done with these commands: git grep -l Local.variab|xargs \ perl -0x3b -pi -e 's,\n+/\*\n \* vim:(.|\n)*,\n,' git grep -l Local.variab|xargs \ perl -0x3b -pi -e 's,\n+/\*\n \* Local variables:\n(.|\n)*,\n,'
-
- 20 2月, 2008 1 次提交
-
-
由 Daniel P. Berrange 提交于
-
- 30 1月, 2008 1 次提交
-
-
由 Jim Meyering 提交于
Use <config.h>, not "config.h", per autoconf documentation. * Makefile.cfg (local-checks-to-skip) [sc_require_config_h]: Enable. * .x-sc_require_config_h: New file, to list exempted files. * Makefile.am (EXTRA_DIST): Add .x-sc_require_config_h.
-
- 26 11月, 2007 1 次提交
-
-
由 Richard W.M. Jones 提交于
* src/bridge.c, src/bridge.h, src/qemu_conf.c, src/qemu_conf.h, src/qemu_driver.c, src/qemu_driver.h, src/test.c: Disable more of qemu if configured --without-qemu.
-
- 29 6月, 2007 1 次提交
-
-
由 Daniel Veillard 提交于
stylesheet * docs/*: regenerated * src/bridge.c src/bridge.h src/buf.c src/iptables.c src/libvirt.c src/qemu_driver.c src/qemu_driver.h src/uuid.c src/uuid.h: cleanup, addd comments, made functions static and fixe a few bugs Daniel
-
- 27 6月, 2007 10 次提交
-
-
由 Daniel P. Berrange 提交于
-
由 Daniel P. Berrange 提交于
-
由 Daniel P. Berrange 提交于
-
由 Daniel P. Berrange 提交于
-
由 Daniel P. Berrange 提交于
-
由 Daniel P. Berrange 提交于
-
由 Daniel P. Berrange 提交于
-
由 Daniel P. Berrange 提交于
-
由 Daniel P. Berrange 提交于
-
由 Daniel P. Berrange 提交于
-
- 16 3月, 2007 1 次提交
-
-
由 Daniel Veillard 提交于
src/sexpr.h src/test.c src/xm_internal.c src/xml.c src/xml.h: applied patch from Richard Jones adding check to printf-like functions and fixing the problems raised Daniel
-
- 23 2月, 2007 2 次提交
-
-
由 Mark McLoughlin 提交于
* qemud/protocol.h: add the (domain/network)(Get/Set)Autostart requests and replies to the protocol. * src/qemu_internal.c: hookup the qemu driver autostart methods * qemud/dispatch.c, qemud/driver.[ch], internal.h: add the daemon side, but just set an in-memory autostart flag for now.
-
由 Mark McLoughlin 提交于
* qemud/driver.[ch], qemud/dispatch.c: fix the fact that qemudDispatchDomainStart() doesn't report an error if the uuid lookup fails and also move the uuid lookup into the driver so that it matches the way we do Destroy().
-
- 15 2月, 2007 1 次提交
-
-
由 Mark McLoughlin 提交于
* include/libvirt/libvirt.h.in, src/libvirt.c: add virNetworkGetBridgeName() to allow finding out what bridge to connect to in order to join a network. * src/driver.h: add networkGetBridgeName() to vtable. * qemud/protocol.h: add the request and reply to the qemud protocol. * qemud/dispatch.c, qemud/driver.[ch]: handle them here. * src/qemu_internal.c: implement GetBridgeName() in the qemu driver. * src/libvirt_sym.version: add new symbol.
-
- 14 2月, 2007 2 次提交
-
-
由 Mark McLoughlin 提交于
* qemud/protocol.h: add the protocol for virtual networks * qemud/dispatch.c: implement the protocol * qemud/driver.[ch]: add stubs for the driver * qemud/internal.h: add struct qemud_network * src/qemu_internal.c: add a virtual networks driver
-
由 Daniel P. Berrange 提交于
-