- 11 6月, 2015 6 次提交
-
-
由 Jiri Denemark 提交于
If a macro has a string value, the @string attribute will contain the value. Otherwise @string attribute will be missing. For example, the following macro definition from libvirt-domain.h: /** * VIR_MIGRATE_PARAM_URI: * ... */ # define VIR_MIGRATE_PARAM_URI "migrate_uri" will result in <macro name='VIR_MIGRATE_PARAM_URI' file='libvirt-domain' string='migrate_uri'> <info><![CDATA[...]]></info> </macro> https://bugzilla.redhat.com/show_bug.cgi?id=1229199Signed-off-by: NJiri Denemark <jdenemar@redhat.com>
-
由 Jiri Denemark 提交于
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>
-
由 Daniel P. Berrange 提交于
The virNetServer class has the ability to serialize its state to a JSON file, and then re-load that data after an in-place execve() call to re-connect to active file handles. This data format is critical ABI that must have compatibility across releases, so it should be tested...
-
由 Daniel P. Berrange 提交于
The socket test suite has a function for checking if IPv4 or IPv6 are available, and returning a free socket. The first bit of that will be needed in another test, so pull that logic out into a separate helper method. Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
-
由 Daniel P. Berrange 提交于
By default, getaddrinfo() will return addresses for both IPv4 and IPv6 if both protocols are enabled, and so the RPC code will listen/connect to both protocols too. There may be cases where it is desirable to restrict this to just one of the two protocols, so add an 'int family' parameter to all the TCP related APIs. Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
-
由 Eric Blake 提交于
Based on recent list questions on how to contribute a translation fix. Signed-off-by: NEric Blake <eblake@redhat.com>
-
- 10 6月, 2015 4 次提交
-
-
由 Michal Privoznik 提交于
https://bugzilla.redhat.com/show_bug.cgi?id=1224587 The function takes two important arguments (among many others): @node and @page_size. From these two a path under /sys is constructed. The path is then used to read and write the desired size of huge pages pool. However, if the path does not exists due to either @node or @page_size having nonexistent value (e.g. there's no such NUMA node or no page size like -2), an cryptic error message is produced: virsh # allocpages --pagesize 2049 --pagecount 8 --cellno -2 error: Failed to open file '/sys/devices/system/node/node-2/hugepages/hugepages-2049kB/nr_hugepages': No such file or directory Add two more checks to catch this and therefore produce much more friendlier error messages. Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
-
由 John Ferlan 提交于
-
由 Shivaprasad G Bhat 提交于
dnsmasq conf file contents needs to have quotes escaped for it to work. Because of this, the network-create/start for a network with quotes in the name fails. The patch escapes strings for the entries that go into the conf file. Signed-off-by: NShivaprasad G Bhat <sbhat@linux.vnet.ibm.com>
-
由 Shivaprasad G Bhat 提交于
The network name is currently of type "deviceName" but it should be "text" as name is defined in the network.rng. Signed-off-by: NShivaprasad G Bhat <sbhat@linux.vnet.ibm.com>
-
- 09 6月, 2015 13 次提交
-
-
由 Dmitry Guryanov 提交于
This patch fixes several formatting errors, which I missed before pushing previous patches. Mostly because of missing cppi package.
-
由 Maxim Nestratov 提交于
We are going to add block devices as disks for containers not as filesystems. Signed-off-by: NMaxim Nestratov <mnestratov@parallels.com>
-
由 Maxim Nestratov 提交于
As we can add disks based on block devices to containers and bus type doesn't have any meaning here, let us report always SATA for them. Signed-off-by: NMaxim Nestratov <mnestratov@parallels.com>
-
由 Maxim Nestratov 提交于
Since we are going to add block devices as root disks we have to specify root mount point for boot block devices. But we shouldn't do this if a filesystem disk with such target mount point already exists. Signed-off-by: NMaxim Nestratov <mnestratov@parallels.com>
-
由 Maxim Nestratov 提交于
Signed-off-by: NMaxim Nestratov <mnestratov@parallels.com>
-
由 Nikolay Shirokovskiy 提交于
Statistics provided through PCS SDK. As we have only async interface in SDK we need to be subscribed to statistics in order to get it. Trivial solution on every stat request to subscribe, wait event and then unsubscribe will lead to significant delays in case of a number of successive requests, as the event will be delivered on next PCS server notify cycle. On the other hand we don't want to keep unnesessary subscribtion. So we take an hibrid solution to subcsribe on first request and then keep a subscription while requests are active. We populate cache of statistics on subscribtion events and use this cache to serve libvirts requests. * Cache details. Cache is just handle to last arrived event, we call this cache as if this handle is valid it is used to serve synchronous statistics requests. We use number of successive events count to detect that user lost interest to statistics. We reset this count to 0 on every request. If more than PARALLELS_STATISTICS_DROP_COUNT successive events arrive we unsubscribe. Special value of -1 of this counter is used to differentiate between subscribed/unsubscribed state to protect from delayed events. Values of PARALLELS_STATISTICS_DROP_COUNT and PARALLELS_STATISTICS_TIMEOUT are just drop-ins, choosen without special consideration. * Thread safety issues Use parallelsDomObjFromDomainRef in parallelsDomainBlockStats as we could wait on domain lock down on stack in prlsdkGetStatsParam and if we won't keep reference we could get dangling pointer on return from wait. Signed-off-by: NNikolay Shirokovskiy <nshirokovskiy@parallels.com>
-
由 Peter Krempa 提交于
Docs state that it should behave like eject. Currently the code does not do that. This is a regression since f4b5f530. Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1229592
-
由 Andrea Bolognani 提交于
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>
-
由 Cole Robinson 提交于
We need to use qemu-system-aarch64 to run armv7l KVM VMs on an aarch64 host.
-
由 Cole Robinson 提交于
And it always has, so advertise it similarly to i686
-
由 Cole Robinson 提交于
qemu 2.3.0 added the -cpu host,aarch64=off option, which allows using qemu-system-aarch64 KVM to run armv7l VMs. Add a capabilities check for it, wire it up in qemu_command, and test the command line generation.
-
由 Nikolay Shirokovskiy 提交于
2 reasons to to this. 1. PCS SDK really don't care of handler return value. 2. It hard to imagine how notifier can handle subscriber failures. Even if there are some situations we probably will use some special error codes and not just throw error codes we get from SDK itself. Signed-off-by: NNikolay Shirokovskiy <nshirokovskiy@parallels.com>
-
由 Nikolay Shirokovskiy 提交于
Use issuer type instead of event type to group vm related events. This saves us from explicit enumeration of all vm event types in prlsdkHandleVmEvent.
-
- 08 6月, 2015 3 次提交
-
-
由 Michal Privoznik 提交于
Not every architecture out there has 'char' signed by default. For instance, my arm box has it unsigned by default: $ gcc -dM -E - < /dev/null | grep __CHAR_UNSIGNED__ #define __CHAR_UNSIGNED__ 1 Therefore, after 65c61e50 the test if failing for me. Problem is, we are trying to assign couple of negative values into char assuming some will overflow and some don't. That can't be the case if 'char' is unsigned by default. Lets use more explicit types instead: int8_t and uint8_t where is no ambiguity. Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
-
由 Roman Bogorodskiy 提交于
Commit 825df8c3 refactored virProcess{Set,Get}Affinity routines, however broke BSD implementation because of the incorrect variable name. Fix build by using a proper variable name. Pushing as trivial and build break fix.
-
由 Peter Krempa 提交于
The stubs for the two functions that are compiled on platforms that don't have HAVE_GETPWUID_R and friends defined do not return error but report an error message. The calling code then assumes that the @uid or @gid arguments were filled, which is not the case in the stubs.
-
- 05 6月, 2015 14 次提交
-
-
由 Ján Tomko 提交于
We were effectively ignoring its errors anyway.
-
由 Ján Tomko 提交于
The monitor code does not hold the virDomainObjPtr lock and should not access the defitinion.
-
由 Ján Tomko 提交于
-
由 Ján Tomko 提交于
There's no point in calling the monitor if there is no balloon.
-
由 Ján Tomko 提交于
There is nothing to get from the monitor for model='none'.
-
由 Ján Tomko 提交于
It only makes sense if qemuMonitorGetMemoryStats is called, but the following patch will make that call conditional.
-
由 Ján Tomko 提交于
Reduce the indentation level.
-
由 Ján Tomko 提交于
All the callers use "/" anyway.
-
由 Ján Tomko 提交于
When traversing through the QOM tree, we're looking for a link to a device, e.g.: link<virtio-balloon-pci> Introduce a helper that will format the link name at the start, instead of doing it every time while recursing through the tree.
-
由 Ján Tomko 提交于
This function is specific to the JSON monitor.
-
由 Daniel P. Berrange 提交于
Ref service passed as a parameter to the callback. And don't unref the socket that is part of the service being passed at another point in code. Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>
-
由 Daniel P. Berrange 提交于
Append privateData of the client only if there are any, otherwise the previous value (socket data) will get there again. Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>
-
由 Daniel P. Berrange 提交于
As opposed to 'static'; by exporting it (privately). Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>
-
由 Martin Kletzander 提交于
When building without avahi support, we used VIR_DEBUG() to note that to the user. However, functions that fail because of that (return NULL/-1) did not set the error message. This was the only file that forgot to do such thing. Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>
-