Instead of returning raw errno values, report full libvirt
errors in virCgroupNew* functions.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Convert the type of loop iterators named 'i', 'j', k',
'ii', 'jj', 'kk', to be 'size_t' instead of 'int' or
'unsigned int', also santizing 'ii', 'jj', 'kk' to use
the normal 'i', 'j', 'k' naming
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

libivrt lxc can only set generic weight for container,
This patch allows user to setup per device blkio
weigh for container.
Signed-off-by: NGao feng <gaofeng@cn.fujitsu.com>

The source code base needs to be adapted as well. Some files
include virutil.h just for the string related functions (here,
the include is substituted to match the new file), some include
virutil.h without any need (here, the include is removed), and
some require both.

The change in commit aed49863
was incomplete, missing a couple of cases of /system. This
caused failure to start VMs.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

After discussions with systemd developers it was decided that
a better default policy for resource partitions is to have
3 default partitions at the top level

   /system   - system services
   /machine - virtual machines / containers
   /user    - user login session

This ensures that the default policy isolates guest from
user login sessions & system services, so a mis-behaving
guest can't consume 100% of CPU usage if other things are
contending for it.

Thus we change the default partition from /system to
/machine
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

The virCgroupNewDriver method had a 'bool privileged' param.
If a false value was ever passed in, it would simply not
work, since non-root users don't have any privileges to create
new cgroups. Just delete this broken code entirely and make
the QEMU driver skip cgroup setup in non-privileged mode
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Historically QEMU/LXC guests have been placed in a cgroup layout
that is

   $LOCATION-OF-LIBVIRTD/libvirt/{qemu,lxc}/$VMNAME

This is bad for a number of reasons

 - The cgroup hierarchy gets very deep which seriously
   impacts kernel performance due to cgroups scalability
   limitations.

 - It is hard to setup cgroup policies which apply across
   services and virtual machines, since all VMs are underneath
   the libvirtd service.

To address this the default cgroup location is changed to
be

    /system/$VMNAME.{lxc,qemu}.libvirt

This puts virtual machines at the same level in the hierarchy
as system services, allowing consistent policy to be setup
across all of them.

This also honours the new resource partition location from the
XML configuration, for example

  <resource>
    <partition>/virtualmachines/production</partitions>
  </resource>

will result in the VM being placed at

    /virtualmachines/production/$VMNAME.{lxc,qemu}.libvirt

NB, with the exception of the default, /system, path which
is intended to always exist, libvirt will not attempt to
auto-create the partitions in the XML. It is the responsibility
of the admin/app to configure the partitions. Later libvirt
APIs will provide a way todo this.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

A resource partition is an absolute cgroup path, ignoring the
current process placement. Expose a virCgroupNewPartition API
for constructing such cgroups
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Rename all the virCgroupForXXX methods to use the form
virCgroupNewXXX since they are all constructors. Also
make sure the output parameter is the last one in the
list, and annotate all pointers as non-null. Fix up
all callers, and make sure they use true/false not 0/1
for the boolean parameters
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Instead of calling virCgroupForDomain every time we need
the virCgrouPtr instance, just do it once at Vm startup
and cache a reference to the object in virLXCDomainObjPrivatePtr
until shutdown of the VM. Removing the virCgroupPtr from
the LXC driver state also means we don't have stale mount
info, if someone mounts the cgroups filesystem after libvirtd
has been started
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Currently when getting an instance of virCgroupPtr we will
create the path in all cgroup controllers. Only at the virt
driver layer are we attempting to filter controllers. This
is bad because the mere act of creating the dirs in the
controllers can have a functional impact on the kernel,
particularly for performance.

Update the virCgroupForDriver() method to accept a bitmask
of controllers to use. Only create dirs in the controllers
that are requested. When creating cgroups for domains,
respect the active controller list from the parent cgroup
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

The virCgroupGetAppRoot is not clear in its meaning. Change
to virCgroupForSelf to highlight that this returns the
cgroup config for the caller's process
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

This patch adds cpuset cgroup support for LXC.
Signed-off-by: NGao feng <gaofeng@cn.fujitsu.com>

Currently the LXC controller creates the cgroup, configures the
resources and adds the task all in one go. This is not sufficiently
flexible for the forthcoming NBD integration. We need to make sure
the NBD process gets into the right cgroup immediately, but we can
not have limits (in particular the device ACL) applied at the point
where we start qemu-nbd. So create a virLXCCgroupCreate method
which creates the cgroup and adds the current task to be called
early, and leave virLXCCgroupSetup to only do resource config.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Rename all the usbDeviceXXX and usbXXXDevice APIs to have a
fixed virUSBDevice name prefix

When iterating over USB host devices to setup cgroups, the
usbDevice object was leaked in both LXC and QEMU driers
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

To bring in line with new naming practice, rename the=
src/util/cgroup.{h,c} files to vircgroup.{h,c}
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

This extends support for host device passthrough with LXC to
cover misc devices. In this case all we need todo is a
mknod in the container's /dev and whitelist the device in
cgroups
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

This extends support for host device passthrough with LXC to
cover storage devices. In this case all we need todo is a
mknod in the container's /dev and whitelist the device in
cgroups
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

This adds support for host device passthrough with the
LXC driver. Since there is only a single kernel image,
it doesn't make sense to pass through PCI devices, but
USB devices are fine. For the latter we merely need to
make the /dev/bus/usb/NNN/MMM character device exist
in the container's /dev
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Currently LXC guests can be given arbitrary pre-mounted
filesystems, however, for some usecases it is more appropriate
to provide block devices which the container can mount itself.
This first impl only allows for <disk type='block'>, in other
words exposing a host disk device to a container. Since LXC
does not have device namespace virtualization, we are cheating
a little bit. If the XML specifies /dev/sdc4 to be given to
the container as /dev/sda1, when we do the mknod /dev/sda1
in the container's /dev, we actually use the major:minor
number of /dev/sdc4, not /dev/sda1.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

with this patch,container's meminfo will be shown based on
containers' mem cgroup.

Right now,it's impossible to virtualize all values in meminfo,
I collect some values such as MemTotal,MemFree,Cached,Active,
Inactive,Active(anon),Inactive(anon),Active(file),Inactive(anon),
Active(file),Inactive(file),Unevictable,SwapTotal,SwapFree.

if I miss something, please let me know.
Signed-off-by: NGao feng <gaofeng@cn.fujitsu.com>

this patch addes fuse support for libvirt lxc.
we can use fuse filesystem to generate sysinfo dynamically,
So we can isolate /proc/meminfo,cpuinfo and so on through
fuse filesystem.

we mount fuse filesystem for every container.
the mount name is libvirt,mount point is
localstatedir/run/libvirt/lxc/containername.
Signed-off-by: NGao feng <gaofeng@cn.fujitsu.com>

The LXC driver relies on use of cgroups to kill off LXC processes
in shutdown. If cgroups aren't available, we're unable to kill
off processes, so we must treat lack of cgroups as a fatal startup
error.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

The code setting up LXC cgroups used an 'rc' variable both
for capturing the return value of methods it calls, and
its own return status. The result was that several failures
in setting up cgroups would actually result in success being
returned.

Use a separate 'ret' for tracking return value as per normal
code design in other parts of libvirt
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

https://www.gnu.org/licenses/gpl-howto.html recommends that
the 'If not, see <url>.' phrase be a separate sentence.

* tests/securityselinuxhelper.c: Remove doubled line.
* tests/securityselinuxtest.c: Likewise.
* globally: s/;  If/.  If/

Per the FSF address could be changed from time to time, and GNU
recommends the following now: (http://www.gnu.org/licenses/gpl-howto.html)

  You should have received a copy of the GNU General Public License
  along with Foobar.  If not, see <http://www.gnu.org/licenses/>.

This patch removes the explicit FSF address, and uses above instead
(of course, with inserting 'Lesser' before 'General').

Except a bunch of files for security driver, all others are changed
automatically, the copyright for securify files are not complete,
that's why to do it manually:

  src/security/security_selinux.h
  src/security/security_driver.h
  src/security/security_selinux.c
  src/security/security_apparmor.h
  src/security/security_apparmor.c
  src/security/security_driver.c

Move the cgroup setup code out of the lxc_controller.c file
and into lxc_cgroup.{c,h}. This reduces the size of the
lxc_controller.c file and paves the way to invoke cgroup
setup from lxc_driver.c instead of lxc_controller.c in the
future
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>