The snapshot name generator truncates the original file name after a '.'
and replaces the suffix with the snapshot name. If two disks source
images differ only in the suffix portion, the generated name will be
duplicate.

Since this is a corner case just error out stating that a duplicate name
was generated. The user can work around this situation by providing
the file names explicitly.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1283085

Get rid of one indentation level by negating condition and remove ugly
pointer arithmetic at the cost of one extra allocation.

Stick to the naming pattern.

Mock libraries should not be linked against libvirt, but some of
them did - fix that.

On the other hand, not linking against gnulib can cause build
failures on mingw, so define a new $(MOCKLIBS_LIBS) variable and
use it everywhere.

The virportallocatortest.c file is compiled both as a test case
and as a mock library; in the latter case, it can't use
VIR_FORCE_CLOSE() because mock libraries are not linked against
libvirt.

Replace VIR_FORCE_CLOSE() with plain close() to solve the issue.

Apparently we are not the only ones with dumb free functions
because dbus_message_unref() does not accept NULL either. But if
I were to vote, this one is even more evil. Instead of returning
an error just like we do it immediately dereference any pointer
passed and thus crash you app. Well done DBus!

  Program received signal SIGSEGV, Segmentation fault.
  [Switching to Thread 0x7f878ebda700 (LWP 31264)]
  0x00007f87be4016e5 in ?? () from /usr/lib64/libdbus-1.so.3
  (gdb) bt
  #0  0x00007f87be4016e5 in ?? () from /usr/lib64/libdbus-1.so.3
  #1  0x00007f87be3f004e in dbus_message_unref () from /usr/lib64/libdbus-1.so.3
  #2  0x00007f87bf6ecf95 in virSystemdGetMachineNameByPID (pid=9849) at util/virsystemd.c:228
  #3  0x00007f879761bd4d in qemuConnectCgroup (driver=0x7f87600a32a0, vm=0x7f87600c7550) at qemu/qemu_cgroup.c:909
  #4  0x00007f87976386b7 in qemuProcessReconnect (opaque=0x7f87600db840) at qemu/qemu_process.c:3386
  #5  0x00007f87bf6edfff in virThreadHelper (data=0x7f87600d5580) at util/virthread.c:206
  #6  0x00007f87bb602334 in start_thread (arg=0x7f878ebda700) at pthread_create.c:333
  #7  0x00007f87bb3481bd in clone () at ../sysdeps/unix/sysv/linux/x86_64/clone.S:109
  (gdb) frame 2
  #2  0x00007f87bf6ecf95 in virSystemdGetMachineNameByPID (pid=9849) at util/virsystemd.c:228
  228         dbus_message_unref(reply);
  (gdb) p reply
  $1 = (DBusMessage *) 0x0
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

This function returns -1 on allocation error, there's no
need to check the path for NULL again.

Do not store the return value of called functions in the same variable
as the (future) return value of the current function.

This makes tracking the origin of the value easier and reduces
the chance of introducing a new point of exit without resetting
the return value back to -1.

Using strcat directly is more readable than passing strlen
of the copied string to strncat.

Also fix the curly brace to pass sytnax-check.

https://bugzilla.redhat.com/show_bug.cgi?id=1293351

Since we already have virtio channel events, we know when guest
agent within guest has (dis-)connected. Instead of us blindly
connecting to a socket that no one is listening to, we can just
follow what qemu-ga does. This has a nice benefit that we don't
need to 'guest-ping' the agent just to timeout and find out
nobody is listening.

The way that this commit is implemented:
- don't connect in qemuProcessLaunch directly, defer that to event
  callback (which already follows the agent) -
  processSerialChangedEvent
- after migration is settled, before we resume vCPUs, ask qemu
  whether somebody is listening on the socket and if so, connect
  to it.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Extract out the qemuParseCommandLine{String|Pid} into their own
separate module - taking with it all the various static functions.

Causes a ripple effect with a few other modules to include the
new qemu_parse_command.h.

Narrowed down the list of #include's in the split out module to
those that are necessary for build.

Recent refactors in the vbox code to check the return status for the
function tipped Coverity's scales of justice for any functions that
do not check status - such as this one.

While I'm at it, since the call is essentially the same other than
whether starting from val or val+1 when val[0] = '[', just adjust
the val pointer by one and have one call instead of two.

Additionally, the call to virDomainGraphicsListenGetAddress is redundant
since it checking that the address field got filled.  It's a leftover
from the strndup -> ListenSetAddress conversion (commit id 'ef79fb5b')
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

Refactor qemuParseCommandLine to pull out the "-vnc" argument parsing
into its own helper function.  Modify the code to use "cleanup" instead
of "error" and use the standard return processing to indicate success
or failure by using ret
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

This reverts commit 6aa90452.

Turns out that not linking against libvirt and gnulib is okay for
regular Linux (and FreeBSD) builds, but makes mingw very unhappy.

  .../virnetserverclientmock_la-virnetserverclientmock.o:
    In function `virNetSocketGetSELinuxContext':
    .../virnetserverclientmock.c:61: undefined reference to `rpl_strdup'
  .../libvirportallocatormock_la-virportallocatortest.o:
    In function `init_syms':
    .../virportallocatortest.c:61: undefined reference to `virFileClose'

Mock libraries are used with LD_PRELOAD from test binaries that
are already linked against those libraries, so they will be able
to resolve the symbols anyway.

The function, like others in our code, returns zero on success
and a negative value on error. However, there are two places in
xenconfig source code where we check for non-zero value. While
the function can't currently return a positive value, those
checks look okay, but does not really follow our style.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

This patch introduces keep alive messages support for P2P migration
and it adds two new configuration entries namely 'keepalive_interval'
'keepalive_count' to control it. Behavior of these entries is the
same as qemu driver thus the description is copied from there
with just a few simplifications.
Signed-off-by: NJoao Martins <joao.m.martins@oracle.com>

Introduce support for VIR_MIGRATE_PEER2PEER in libvirt migration.
Most of the changes occur at the source and no modifications at
the receiver.

In P2P mode there is only the Perform phase so we must handle the
connection with the destination and actually perform the
migration. libxlDomainPerformP2P implements the connection to the
destination and libxlDoMigrateP2P implements the actual migration
logic with virConnectPtr. In this function we take care of doing
all phases of migration in the destination similar to
virDomainMigrateVersion3Full. We appropriately save the last
error reported in each of the phases to provide proper reporting.
We don't yet support VIR_MIGRATE_TUNNELED and we always use V3
with extensible params, thus it also makes the implementation
simpler.

It is worth noting that the receiver didn't have any changes, and
since it's still the v3 sequence thus it is possible to migrate
from a P2P to non-P2P host.
Signed-off-by: NJoao Martins <joao.m.martins@oracle.com>

Clarify the point of some of the test cases by renaming them. Add more
xml2xml tests.

We use the PreFormat callback for this. Many test cases need to be extended
to pass in proper qemuCaps flags so AssignAddresses doesn't throw errors.

One test case (pcie-root-port-too-many) is dropped, since it was meant
only for checking an error condition in qemuxml2argv, and one we add in
AssignAddresses it errors here too.

Long term I think AssignAddresses should be handled in qemu's PostParse
callback, but that's not entirely straightforward. Handling it here
means we can get the test suite churn over with.

This allows individual driver tests to hook in their own code before
the def is formatted and compared.

We will eventually use this in the qemuxml2xml

The virStringListLength function does not ever modify the passed
string list. It merely counts the items in it. Make sure that we
reflect this bit in the function header.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

(crobinso: fix up spacing and squash in sheepdog bit suggested
 by Andrea)

Similar to how we do it for qemuxml2argvtest. This will be used in future
patches.

QEMU_CAPS_DEVICE is always enabled for qemu binaries we support.
Sync qemuxml2* to match, and regenerate all test output.

When we unconditionally enable QEMU_CAPS_DEVICE, these tests need
some massaging, so do it ahead of time to not mix it in with the
big test refresh.

- minimal-s390 is not a real world working config, so drop it
- disk-usb was testing for an old code path that will be removed.
  instead use it to test lack of USB disk support, and rename it
  to disk-usb-nosupport. Switch xml2xml to use disk-usb-device for
  input.
- cputune-numatune was needlessly using q35, switch it to an older
  machine type

Older gcc fails to see that the variable is set iff @hasPriority
== true in which case the former is set a value. Initialize the
value while declaring it to make the compiler shut up.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

It does exactly the same thing as virStringListLength() and it's used in
one place only.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

Most qemuxml2xml tests expect that the input XML is unchanged after
parsing. This is unlike 99% of new qemu configs in the wild, which after
initial parsing end up with stable PCI device addresses. The xml2xml bit
doesn't currently hit that code path though, so most XML testing indeed
does not change.

Future patches will add that PCI address bits, which means most test cases
will have different output. So let's do away with the hardcoded same vs
different test split, and always track a separate output file. Tests can
still have same input and output, it just necessitates 2 separate XML files.

Commit 97e70a59 added the option -pie to
CFLAGS and LDFLAGS, however '-pie' is just a linker option.  That
wouldn't be a problem.  However, clang is checking for that and outputs
an error or unused argument:

error: argument unused during compilation: '-pie'
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

My commit e11aa749 messed up the parameter order.

Reported by John Ferlan.

Remove the extra spaces, do not align them on '='.

The return type of strlen is 'size_t', which is unsigned and therefore
never less than zero.

Use STREQ to make the check obvious.

We free the key right after calling the API.

Reuse a single variable to remove the typo.

Instead of open-coding it.