Remove assignment of the string freed by virURIFree
to hostname, since it's not used anywhere.

Double free introduced by ddf8ad82, useless code
introduced by f03dcc5d.

https://bugzilla.redhat.com/show_bug.cgi?id=977961
(cherry picked from commit 5744d96f)

This fixes https://bugzilla.redhat.com/show_bug.cgi?id=971325

The problem was that if virPCIGetVirtualFunctions was given the name
of a non-existent interface, it would return to its caller without
initializing the pointer to the array of virtual functions to NULL,
and the caller (virNetDevGetVirtualFunctions) would try to VIR_FREE()
the invalid pointer.

The final error message before the crash would be:

 virPCIGetVirtualFunctions:2088 :
  Failed to open dir '/sys/class/net/eth2/device':
  No such file or directory

In this patch I move the initialization in virPCIGetVirtualFunctions()
to the begining of the function, and also do an explicit
initialization in virNetDevGetVirtualFunctions, just in case someone
in the future adds code into that function prior to the call to
virPCIGetVirtualFunctions.

(cherry picked from commit 2c2525ab)

We can only pass values up to LLONG_MAX through JSON
and QEMU checks if the int64_t number is not negative
at startup since 1.5.0.

https://bugzilla.redhat.com/show_bug.cgi?id=974010
(cherry picked from commit d3c87884)

This fixes the problem reported in:

   https://bugzilla.redhat.com/show_bug.cgi?id=972690

When checking for a collision of a new libvirt network's subnet with
any existing routes, we read all of /proc/net/route into memory, then
parse all the entries. The function that we use to read this file
requires a "maximum length" parameter, which had previously been set
to 64*1024. As each line in /proc/net/route is 128 bytes, this would
allow for a maximum of 512 entries in the routing table.

This patch increases that number to 128 * 100000, which allows for
100,000 routing table entries. This means that it's possible that 12MB
would be allocated, but that would only happen if there really were
100,000 route table entries on the system, it's only held for a very
short time.

Since there is no method of specifying and unlimited max (and that
would create a potential denial of service anyway) hopefully this
limit is large enough to accomodate everyone.

(cherry picked from commit 2bdf548f)

Convert input XML to migratable before using it in
qemuDomainSaveImageOpen.

XML in the save image is migratable, i.e. doesn't contain implicit
controllers. If these controllers were in a non-default order in the
input XML, the ABI check would fail. Removing and re-adding these
controllers fixes it.

https://bugzilla.redhat.com/show_bug.cgi?id=834196
(cherry picked from commit 07966f6a)

https://bugzilla.redhat.com/show_bug.cgi?id=971485

As of d7f9d827 we copy the listen
address from the qemu.conf config file in case none has been provided
via XML. But later, when migrating, we should not include such listen
address in the migratable XML as it is something autogenerated, not
requested by user. Moreover, the binding to the listen address will
likely fail, unless the address is '0.0.0.0' or its IPv6 equivalent.
This patch introduces a new boolean attribute to virDomainGraphicsListenDef
to distinguish autofilled listen addresses. However, we must keep the
attribute over libvirtd restarts, so it must be kept within status XML.

(cherry picked from commit 6546017c)

iscsiadm now supports specifying hostnames in the portal argument [1]

Instead of resolving the hostname to a single IPv4 address, pass the
hostname to isciadm, allowing IPv6 targets to work.

[1] https://bugzilla.redhat.com/show_bug.cgi?id=624437

(cherry picked from commit cbdb3c73)

https://bugzilla.redhat.com/show_bug.cgi?id=964177

Though both libvirt and QEMU's document say RTC_CHANGE returns
the offset from the host UTC, qemu actually returns the offset
from the specified date instead when specific date is provided
(-rtc base=$date).

It's not safe for qemu to fix it in code, it worked like that
for 3 years, changing it now may break other QEMU use cases.
What qemu tries to do is to fix the document:

http://lists.gnu.org/archive/html/qemu-devel/2013-05/msg04782.html

And in libvirt side, instead of replying on the value from qemu,
this converts the offset returned from qemu to the offset from
host UTC, by:

  /*
   * a: the offset from qemu RTC_CHANGE event
   * b: The specified date (-rtc base=$date)
   * c: the host date when libvirt gets the RTC_CHANGE event
   * offset: What libvirt will report
   */

  offset = a + (b - c);

The specified date (-rtc base=$date) is recorded in clock's def as
an internal only member (may be useful to exposed outside?).

Internal only XML tag "basetime" is introduced to not lose the
guest's basetime after libvirt restarting/reloading:

<clock offset='variable' adjustment='304' basis='utc' basetime='1370423588'/>

(cherry picked from commit e31b5cf3)

Instead of a unknown flag error report that metadata pre-allocation is
not supported with the requested volume creation method.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=969982
(cherry picked from commit 77e7f69c)

For USB devices, dev->name gets formated as %.3o:%.3o even though the
numbers are decimal.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=967712
(cherry picked from commit dc0c7915)

https://bugzilla.redhat.com/show_bug.cgi?id=903480

During domain destruction it's possible that the learnIPAddressThread has
already removed the interface prior to the teardown filter path being run.
The teardown code would only be telling the thread to terminate.

(cherry picked from commit 64919d97)

If snapshot creation failed for example due to invalid use of the
"REUSE_EXTERNAL" flag, libvirt killed access to the original image file
instead of the new image file. On machines with selinux this kills the
whole VM as the selinux context is enforced immediately.

* qemu_driver.c:qemuDomainSnapshotUndoSingleDiskActive():
    - Kill access to the new image file instead of the old one.

Partially resolves: https://bugzilla.redhat.com/show_bug.cgi?id=906639

(cherry picked from commit 17704675)

Function qemuDomainSetBlockIoTune() was checking QEMU capabilities
even when !(flags & VIR_DOMAIN_AFFECT_LIVE) and the domain was
shutoff, resulting in the following problem:

 virsh # domstate asdf; blkdeviotune asdf vda --write-bytes-sec 100
 shut off

 error: Unable to change block I/O throttle
 error: unsupported configuration: block I/O throttling not supported with this QEMU binary

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=965016
(cherry picked from commit 5af3ce82)

By default files in a FUSE mount can only be accessed by the
user which created them, even if the file permissions would
otherwise allow it. To allow other users to access the FUSE
mount the 'allow_other' mount option must be used. This bug
prevented non-root users in an LXC container from reading
the /proc/meminfo file.

https://bugzilla.redhat.com/show_bug.cgi?id=967977Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
(cherry picked from commit 922ebe4e)

Many applications use /dev/tty to read from stdin.
e.g. zypper on openSUSE.

Let's create this device node to unbreak those applications.
As /dev/tty is a synonym for the current controlling terminal
it cannot harm the host or any other containers.
Signed-off-by: NRichard Weinberger <richard@nod.at>
(cherry picked from commit 9a0ac6d9)

Conflicts:
	src/lxc/lxc_controller.c

This patch implements support for the "cpu-add" QMP command that plugs
CPUs into a live guest. The "cpu-add" command was introduced in QEMU
1.5. For the hotplug to work machine type "pc-i440fx-1.5" is required.

(cherry picked from commit c12b2be5)

Call virLogVMessage instead of virLogMessage, since libudev
called us with a va_list object, not a list of arguments.

Honor message priority and strip the trailing newline.

https://bugzilla.redhat.com/show_bug.cgi?id=969152
(cherry picked from commit f753dd62)

Before trying to mount the selinux filesystem in a container
use is_selinux_enabled() to check if the machine actually
has selinux support (eg not booted with selinux=0)
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
(cherry picked from commit 95c6cc34)

Re-add the selinux header to lxc_container.c since other
functions now use it, beyond the patch that was just
reverted.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
(cherry picked from commit 63ea1e54)

Change bbe97ae9 caused the
QEMU driver to ignore ENOENT errors from cgroups, in order
to cope with missing /proc/cgroups. This is not good though
because many other things can cause ENOENT and should not
be ignored. The callers expect to see ENXIO when cgroups
are not present, so adjust the code to report that errno
when /proc/cgroups is missing
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
(cherry picked from commit c2cf5f1c)

Found that I was unable to start existing domains after updating
to a kernel with no cgroups support

  # zgrep CGROUP /proc/config.gz
  # CONFIG_CGROUPS is not set
  # virsh start test
  error: Failed to start domain test
  error: Unable to initialize /machine cgroup: Cannot allocate memory

virCgroupPartitionNeedsEscaping() correctly returns errno (ENOENT) when
attempting to open /proc/cgroups on such a system, but it was being
dropped in virCgroupSetPartitionSuffix().

Change virCgroupSetPartitionSuffix() to propagate errors returned by
its callees.  Also check for ENOENT in qemuInitCgroup() when determining
if cgroups support is available.
(cherry picked from commit bbe97ae9)

Escaping a leading '.' with '_' in the cgroup names
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
(cherry picked from commit 0ced83dc)

Describe the new cgroups layout, how to customize placement
of guests and what virsh commands are used to access the
parameters.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
(cherry picked from commit 486a86eb)

It is possible to build a kernel without swap cgroup controls
present. This causes a fatal error when querying memory
parameters. Treat missing swap controls as meaning "unlimited".
The fatal error remains if the user tries to actually change
the limit.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
(cherry picked from commit f493d83f)

Xen 4.3 fixes a mistake in the libxl event handler signature where the
event owned by the application was defined as const.  Detect this and
define the libvirt libxl event handler signature appropriately.
(cherry picked from commit 43b0ff5b)

If qemuMonitorBlockJob returned 0, qemuDomainBlockPivot
might return 0 even if an error occured.

https://bugzilla.redhat.com/show_bug.cgi?id=977678
(cherry picked from commit c34107df)

Don't reuse the return value of virStorageBackendFileSystemIsMounted.
If it's 0, we'd return it even if the mount command failed.

Also, don't report another error if it's -1, since one has already
been reported.

Introduced by 258e06c8.

https://bugzilla.redhat.com/show_bug.cgi?id=981251
(cherry picked from commit 13fde7ce)

When creating a virtual FC HBA with virsh/libvirt API, an error message
will be returned: "error: Node device not found",
also the 'nodedev-dumpxml' shows wrong information of wwpn & wwnn
for the new created device.

Signed-off-by: xschen@tnsoft.com.cn

This reverts f90af691 which switched wwpn & wwwn in the wrong place.

https://www.kernel.org/doc/Documentation/scsi/scsi_fc_transport.txt
(cherry picked from commit 3c0d5e22)

If networkUnplugBandwidth is called on a network which has
no bandwidth defined, print a warning instead of crashing.

This can happen when destroying a domain with bandwidth if
bandwidth was removed from the network after the domain was
started.

https://bugzilla.redhat.com/show_bug.cgi?id=975359
(cherry picked from commit 658c932a)

Don't check for '\n' at the end of file if zero bytes were read.

Found by valgrind:
==404== Invalid read of size 1
==404==    at 0x529B09F: virCgroupGetValueStr (vircgroup.c:540)
==404==    by 0x529AF64: virCgroupMoveTask (vircgroup.c:1079)
==404==    by 0x1EB475: qemuSetupCgroupForEmulator (qemu_cgroup.c:1061)
==404==    by 0x1D9489: qemuProcessStart (qemu_process.c:3801)
==404==    by 0x18557E: qemuDomainObjStart (qemu_driver.c:5787)
==404==    by 0x190FA4: qemuDomainCreateWithFlags (qemu_driver.c:5839)

Introduced by 0d0b4098.

https://bugzilla.redhat.com/show_bug.cgi?id=978356
(cherry picked from commit 306c49ff)

Free the old XML strings before overwriting them if the user
has chosen to reedit the file or force the redefinition.

Found by Alex Jia trying to reproduce another bug:
https://bugzilla.redhat.com/show_bug.cgi?id=977430#c3
(cherry picked from commit 1e3a2529)

Cherry-picked from 38ada092

As a consequence of the cgroup layout changes from commit 'cfed9ad4', the
lxcDomainGetSchedulerParameters[Flags]()' and lxcGetSchedulerType() APIs
failed to return data for a non running domain.  This can be seen through
a 'virsh schedinfo <domain>' command which returns:

Scheduler      : Unknown
error: Requested operation is not valid: cgroup CPU controller is not mounted

Prior to that change a non running domain would return:

Scheduler      : posix
cpu_shares     : 0
vcpu_period    : 0
vcpu_quota     : 0
emulator_period: 0
emulator_quota : 0

This patch will restore the capability to return configuration only data
for a non running domain regardless of whether cgroups are available.

NOTE: Needed to change the VIR_STRDUP(ret, "posix"); to ret = strdup("posix");
      and added the virReportOOMError(); on failure.

Cherry-picked from b2375453

As a consequence of the cgroup layout changes from commit '632f78ca', the
qemuDomainGetSchedulerParameters[Flags]()' and qemuGetSchedulerType() APIs
failed to return data for a non running domain.  This can be seen through
a 'virsh schedinfo <domain>' command which returns:

Scheduler      : Unknown
error: Requested operation is not valid: cgroup CPU controller is not mounted

Prior to that change a non running domain would return:

Scheduler      : posix
cpu_shares     : 0
vcpu_period    : 0
vcpu_quota     : 0
emulator_period: 0
emulator_quota : 0

This patch will restore the capability to return configuration only data
for a non running domain regardless of whether cgroups are available.

NOTE: Needed to change the VIR_STRDUP(ret, "posix"); to ret = strdup("posix");
      and added the virReportOOMError(); on failure.

Don't free the stream on error if we've successfully added it
to the hash table, since it will be freed by virChrdevHashEntryFree
callback.

Preserve the error message before calling virStreamFree, since it
resets the error.

Introduced by 47161382, crashing since 69218922.

Reported by Sergey Fionov on libvir-list.
(cherry picked from commit a32b4174)

(cherry picked from commit ddf8ad82)

Change the socket path to match the one used by lockd driver.

https://bugzilla.redhat.com/show_bug.cgi?id=968128
(cherry picked from commit 70fe1295)

Use the host number as the host number when constructing the sysfs path
instead of the variable we are trying to fill.

https://bugzilla.redhat.com/show_bug.cgi?id=973543
(cherry picked from commit 371c1551)