As a side effect, the return value of qemuDomainObjEnterMonitorAsync is
not directly used as the return value of qemuProcess{Start,Stop}CPUs.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

If job queue is full or waiting for a job times out, the function
returns -2 so that it can be handled in a different way by callers.

The change is safe since all existing callers of
qemuDomainObjBeginNestedJob check the return value to be less than zero.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

It's only used within qemu_domain.c.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

If the compression program for external snapshot memory image isn't
found we exitted the function without terminating the domain job. This
caused the domain to be unusable.

The problem was introduced in commit 7df5093f.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1097503

Move sharable PCI handling functions to domain_addr.[ch], and
change theirs prefix from 'qemu' to 'vir':

 - virDomainPCIAddressAsString;
 - virDomainPCIAddressBusSetModel;
 - virDomainPCIAddressEnsureAddr;
 - virDomainPCIAddressFlagsCompatible;
 - virDomainPCIAddressGetNextSlot;
 - virDomainPCIAddressReleaseSlot;
 - virDomainPCIAddressReserveAddr;
 - virDomainPCIAddressReserveNextSlot;
 - virDomainPCIAddressReserveSlot;
 - virDomainPCIAddressSetFree;
 - virDomainPCIAddressSetGrow;
 - virDomainPCIAddressSlotInUse;
 - virDomainPCIAddressValidate;

The only change here is function names, the implementation itself
stays untouched.

Extract common allocation code from DomainPCIAddressSetCreate
into virDomainPCIAddressSetAlloc.

Introduce new files (domain_addr.[ch]) to provide
an API for domain device handling that could be
shared across the drivers.

A list of data types were extracted and moved there:

 qemuDomainPCIAddressBus -> virDomainPCIAddressBus
 qemuDomainPCIAddressBusPtr -> virDomainPCIAddressBusPtr
 _qemuDomainPCIAddressSet -> virDomainPCIAddressSet
 qemuDomainPCIAddressSetPtr -> virDomainPCIAddressSetPtr
 qemuDomainPCIConnectFlags -> virDomainPCIConnectFlags

Also, move the related definitions and macros.

Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

https://bugzilla.redhat.com/show_bug.cgi?id=1002813

If qemuDomainBlockResize() is passed a size not on a KiB boundary - that
is passed a size based in bytes (VIR_DOMAIN_BLOCK_RESIZE_BYTES), then
depending on the source format (qcow2 or qed), the value passed must
be on a sector (or 512 byte) boundary. Since other libvirt code quietly
adjusts the capacity values, then do so here as well.

This reverts commit e3d66229.

Commit 9976c4b9 broke the output for VNC
displays as the port number is converted to VNC display number by
subtracting 5900. This yields port 0 for the first display and thus the
output would be skipped.

Before:
 $ virsh domdisplay VM
 vnc://localhost

After:
 $ tools/virsh domdisplay VM
 vnc://localhost:0

When a domain was started without registration in sanlock, but libvirt
was restarted after that, most of the operations failed due to
contacting sanlock about that process.  E.g. migration could not be
performed because the locks couldn't be released (or inquired before a
release).

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1088034Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

Just move some code around for future patches to ease the review.
With this patch there is no need for drastic cleanup path later.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

Our documentation generator is a bit messy, to say the least. For
instance, the description to return values of a function is
searched within C comment. Currently, all lines that start with
'returns' or 'Returns' are viewed as return value description.
However, there are some valid uses where the 'returns' word is in
the middle of a sentence describing function behavior not the
return value. And there are no places where 'returns' is used to
describe return values.  For instance:
virDomainDetachDeviceFlags, virConnectNetworkEventRegisterAny and
virDomainGetDiskErrors. This leads to HTML documemtation being
generated incorrectly.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

With this patch, virDomainFSFreeze will pass the mountpoints argument
to qemu guest agent. For example,

  virDomainFSFreeze(dom, {"/mnt/vol1", "/mnt/vol2"}, 2, 0)

will issue qemu guest agent command:

  {"execute":"guest-fsfreeze-freeze",
   "arguments":{"mountpoints":["/mnt/vol1","/mnt/vol2"]}}
Signed-off-by: NTomoki Sekiyama <tomoki.sekiyama@hds.com>
Acked-by: NDaniel P. Berrange <berrange@redhat.com>

These are exposed under domfsfreeze command and domfsthaw command.
Signed-off-by: NTomoki Sekiyama <tomoki.sekiyama@hds.com>

Use qemuDomainSnapshotFSFreeze() and qemuDomainSnapshotFSFThaw() which are
already implemented for snapshot quiescing.
Signed-off-by: NTomoki Sekiyama <tomoki.sekiyama@hds.com>

"Freezed" is not an English word.

* src/lxc/lxc_driver.c (lxcFreezeContainer): Fix typo.
* src/qemu/qemu_driver.c (qemuDomainSnapshotFSFreeze): Likewise.
Signed-off-by: NEric Blake <eblake@redhat.com>

In "src/conf/" there are many enumeration (enum) declarations. Similar
to the recent cleanup to "src/util" directory, it's better to use a
typedef for variable types, function types and other usages. Other
enumeration and folders will be changed to typedef's in the future.
Most of the files changed in this commit are reltaed to Node and
Network (node_device_conf.h and nwfilter_params.*) enums.
Signed-off-by: NJulio Faracco <jcfaracco@gmail.com>
Signed-off-by: NEric Blake <eblake@redhat.com>

Doc patch for apps.html as per: http://libvirt.org/apps.html#add

Disclaimer: I've contributed patches to the project that this commit
adds.

Vagrant-Libvirt is an excellent way to use vagrant with libvirt. This
way you can benefit from the vagrant features, while not loosing access
to the familiar (and useful) tools such as virsh and virt-manager.

Development currently at:

https://github.com/pradels/vagrant-libvirt/

although recent contributors include:

https://github.com/sciurus/vagrant-libvirt/

and:

https://github.com/purpleidea/vagrant-libvirt/

see git log for more details.
Signed-off-by: NEric Blake <eblake@redhat.com>

<interface type='hostdev' managed='yes'> is supported, but
nowhere mentions 'managed' in <interface type='hostdev'> syntax.
Update documentation to cover it.
Signed-off-by: NChunyan Liu <cyliu@suse.com>

A VIR_DOMAIN_NET_TYPE_HOSTDEV interface device is really a hostdev
device, which is created by the libxl driver in libxlMakePCIList().
There is no need to create a libxl_device_nic for such hostdev
devices, so skip interfaces of type VIR_DOMAIN_NET_TYPE_HOSTDEV in
libxlMakeNicList().
Signed-off-by: NChunyan Liu <cyliu@suse.com>

Some syntax-check rules use GNU sed specific regexps, so make
sure we're using $(SED) instead of sed, which might not be a
GNU sed.

Libvirt calls cpuArchDriver.compare() while doing guest migration.
We don't have any logic to distinguish between different arm and
aarch64 models that's why this patch allows migration to any host.
Signed-off-by: NOleg Strikov <oleg.strikov@canonical.com>

Since the ESX storage implements VMFS and iSCSI storage backends and
chooses relevant backend dynamically at runtime, there was a segfault
when issuing vol-info on iSCSI volume due to unimplemented
virStorageGetInfo function. This patch implements that function that was
missing in iSCSI backend and returns expected result without a segfault.

https://bugzilla.redhat.com/show_bug.cgi?id=1092882

Refactoring in commit id '0c2305b3' resulted in the wrong storage
volume object being passed to the new storageVolDeleteInternal().
It should have passed 'voldef' which is the address found in the
pool->volumes.objs[i] array.  By passing 'voldef', the DeleteInternal
code will find and remove the voldef from the volumes.objs[] list.

Add functions parallelsIsAlive, parallelsIsEncrypted,
parallelsIsSecure which are very simple to implement, but
may be required by some libvirt users. Almost all other
drivers have these functions.
Signed-off-by: NDmitry Guryanov <dguryanov@parallels.com>

There is a problem with function parallelsDomainDefineXML. If we
are defining a new domain, then we need to do 2 things: aclually
create a VM in PCS and add new domain to the cached list of domains
_parallelsConn.domains.

This is done in the function parallelsLoadDomains. So call to
virDomainObjListAdd will return a error, because a domain
with the same name and id will already be in the list.
Signed-off-by: NDmitry Guryanov <dguryanov@parallels.com>

I added this code year ago, instead of implementing ability
to change VNC configuration, which was not trivial, I added
extra call to prlctl, which sets up VNC with auto port, despite
VNC configuration given by a user.

Let's remove this hack, because, first, it doesn't work on the
latest Parallels Cloud Server release (you have to either specify
--vnc-nopasswd option or password). And also has problem with
error handling. If second call to prlctl fails, VM, created by
first call to prlctl, will not be removed.
Signed-off-by: NDmitry Guryanov <dguryanov@parallels.com>

virDomainDef.features became an array, so now we can't simply
compare one features variable to another. We need to compare
each each element from the array.
Signed-off-by: NDmitry Guryanov <dguryanov@parallels.com>

https://bugzilla.redhat.com/show_bug.cgi?id=1002813

If qemuDomainBlockResize() is passed a size not on a KiB boundary - that
is passed a size based in bytes (VIR_DOMAIN_BLOCK_RESIZE_BYTES), then
depending on the source format (qcow2 or qed), the value passed must
be on a sector (or 512 byte) boundary. Since other libvirt code quietly
adjusts the capacity values, then do so here as well - of course ensuring
that adjustment still fits.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

QEMU commit 5e2ac51 added a boolean '-msg timestamp=[on|off]'
option, which can enable timestamps on errors:
$ qemu-system-x86_64 -msg timestamp=on zghhdorf
2014-04-09T13:25:46.779484Z qemu-system-x86_64: -msg timestamp=on: could
not open disk image zghhdorf: Could not open 'zghhdorf': No such file or
directory

Enable this timestamp if the QEMU binary supports it.

Add a 'log_timestamp' option to qemu.conf for disabling this behavior.

Adds 'quiesced' status into qemuDomainObjPrivate that tracks whether
FSFreeze is requested in the domain.

It modifies error code from qemuDomainSnapshotFSFreeze and
qemuDomainSnapshotFSThaw, so that a caller can know whether the command is
actually sent to the guest agent. If the error is caused before sending a
freeze command, a counterpart thaw command shouldn't be sent either, not to
confuse fsfreeze status tracking.
Signed-off-by: NTomoki Sekiyama <tomoki.sekiyama@hds.com>
Signed-off-by: NEric Blake <eblake@redhat.com>

New rules are added in fixup_name in gendispatch.pl to keep the name
FSFreeze and FSThaw. This adds a new ACL permission 'fs_freeze',
which is also applied to VIR_DOMAIN_SNAPSHOT_CREATE_QUIESCE flag.
Signed-off-by: NTomoki Sekiyama <tomoki.sekiyama@hds.com>
Acked-by: NDaniel P. Berrange <berrange@redhat.com>
Signed-off-by: NEric Blake <eblake@redhat.com>

These will freeze and thaw filesystems within guest specified by
@mountpoints parameters. The parameters can be NULL and 0, then all
mounted filesystems are frozen or thawed. @flags parameter, which are
currently not used, is for future extensions.
Signed-off-by: NTomoki Sekiyama <tomoki.sekiyama@hds.com>
Signed-off-by: NEric Blake <eblake@redhat.com>

Some CDROM devices are reported by udev to have an ID_TYPE="generic"
thus it is necessary to check if ID_CDROM is present.

As a side effect, treating ID_TYPE="generic" as a missing ID_TYPE will
enable checks for ID_DRIVE_FLASH_SD and ID_DRIVE_FLOPPY and the
udevKludgeStorageType heuristic.
Signed-off-by: NGiuseppe Scrivano <gscrivan@redhat.com>
Signed-off-by: NEric Blake <eblake@redhat.com>

We don't have a "README-valgrind" file.
So remove related description.
Signed-off-by: NChen Hanxiao <chenhanxiao@cn.fujitsu.com>
Signed-off-by: NEric Blake <eblake@redhat.com>

If the XML_PARSE_NOENT flag is passed to libxml2, then any
entities in the input document will be fully expanded. This
allows the user to read arbitrary files on the host machine
by creating an entity pointing to a local file. Removing
the XML_PARSE_NOENT flag means that any entities are left
unchanged by the parser, or expanded to "" by the XPath
APIs.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>