RHBZ: https://bugzilla.redhat.com/show_bug.cgi?id=1298070

The corresponding chardev must be attached first, otherwise the
the qemu command line won't be complete (missing the host part),

There's this check when building command line that whenever
domain has no graphics card configured we put -nographics onto
qemu command line. The check is 'if (!def->graphics)'. This
makes coverity think that def->graphics can be NULL, which is
true. But later in the code every access to def->graphics is
guarded by check for def->ngraphics, so no crash occurs. But this
is something that coverity fails to deduct.
In order to shut coverity up lets change the condition to
'if (!def->ngraphics)'.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

In case you will specify graphics like this:

<graphics type='spice' port='-1'/>

or

<graphics type='spice' port='-1' tlsPort='6000'/>

libvirt will automatically add autoport='no'.  This leads to an issue
that in qemuProcessStop() we don't release that port because we are
releasing both port if autoport=yes or only port marked as reserved.

If autoport=no but we request to generate port via '-1' we need to mark
that port as reserved in order to release it.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1299696Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

Checking whether x > 0 before looping over [0..x] items doesn't make
sense and multi-line body must have curly brackets around it.

Best viewed with '-w'.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

This does nothing more than adding the new device and capability.
The device is present since QEMU 2.6.0.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

GIC v2 is the default, but checking against that specific version when
we want to know whether the default has been selected is potentially
error prone; using an alias instead makes it safer.

Similarly to VM startup always set the legacy affinity. Additionally we
don't need to report an explicit error since virProcessSetAffinity
reports them themselves.

Similarly to VM startup always set the legacy affinity. Additionally we
don't need to report an explicit error since virProcessSetAffinity
reports them themselves.

PostParse handles it for us now.

This causes some test suite churn; qemu's custom PostParse could is
now invoked before the generic AddImplicitControllers, so PCI
controllers end up sequentially in the XML before the generically
added IDE controllers. So it's just some XML reordering

Everywhere else in qemu driver code 'qemuCaps' is a virQEMUCapsPtr,
and virCapsPtr is generally named just 'caps'. Rename the offenders

Calling qemuProcessStop without a job opens a way to race conditions
with qemuDomainObjExitMonitor called in another thread. A real world
example of such a race condition:

  - migration thread (A) calls qemuMigrationWaitForSpice
  - another thread (B) starts processing qemuDomainAbortJob API
  - thread B signals thread A via qemuDomainObjAbortAsyncJob
  - thread B enters monitor (qemuDomainObjEnterMonitor)
  - thread B calls qemuMonitorSend
  - thread A awakens and calls qemuProcessStop
  - thread A calls qemuMonitorClose and sets priv->mon to NULL
  - thread B calls qemuDomainObjExitMonitor with priv->mon == NULL
  => monitor stays ref'ed and locked

Depending on how lucky we are, the race may result in a memory leak or
it can even deadlock libvirtd's event loop if it tries to lock the
monitor to process an event received before qemuMonitorClose was called.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

Stopping a domain without a job risks a race condition with another
thread which started a job a which does not expect anyone else to be
messing around with the same domain object.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

Only a small portion of processGuestPanicEvent was enclosed within a
job, let's make sure we use the job for all operations to avoid race
conditions.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

When destroying a domain we need to make sure we will be able to start a
job no matter what other operations are running or even stuck in a job.
This is done by killing the domain before starting the destroy job.

Let's introduce qemuProcessBeginStopJob which combines killing a domain
and starting a job in a single API which can be called everywhere we
need a job to stop a domain.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

Ending a nested job is no different from ending any other (non-async)
job, after all the code in qemuDomainBeginJobInternal does not handle
them differently either. Thus we should call qemuDomainObjEndJob to stop
nested jobs.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

qemuDomainHelperGetVcpus would correctly return an array of
virVcpuInfoPtr structs for online vcpus even for sparse topologies, but
the loop that fills the returned typed parameters would number the vcpus
incorrectly. Fortunately sparse topologies aren't supported yet.

VM startup and CPU hotplug always set the affinity regardless of cgroups
support. Use the same approach for the pinning API.

Both errors from the cgroups code and from the affinity code would be
overwritten by the API. Report the more specific error.

Add new function to manage adding the '-mon' or '-monitor' options to
the command line removing that task from the mainline qemuBuildCommandLine.

Also adjusted qemuBuildChrChardevStr and qemuBuildChrArgStr to use
const virDomainChrSourceDef *def rather than virDomainChrSourceDefPtr def.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

Add new function to manage adding the '-device sga' to the command
line removing that task from the mainline qemuBuildCommandLine
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

Add new function to manage adding the '-smbios' options to the command
line removing that task from the mainline qemuBuildCommandLine

Also while I was looking at it, move the uuid processing closer to usage.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

Add new function to manage adding the '-numa' options to the command
line removing that task from the mainline qemuBuildCommandLine
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

Add new function to manage adding the IOThread '-object' to the command
line removing that task from the mainline qemuBuildCommandLine
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

Rename function and move code in from qemuBuildCommandLine to
keep smp related code together. Also make a few style changes
for long lines, return value change, and 2 spaces between functions.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

Add new function to manage adding the '-m' memory options to the command
line removing that task from the mainline qemuBuildCommandLine
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

Rename function and move code from mainline qemuBuildCommandLine to
keep alike code together.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

Rename to qemuBuildMachineCommandLine to fit current (and future)
helper naming conventions.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

Create qemuBuildCommandLineValidate to make some checks before trying
to build the command. This will move some logic from much later to much
earlier - we shouldn't be adjusting any data so that shouldn't matter.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

Fix logic error introduced in commit d6c91b3c which essentially broke
starting any domain.
Signed-off-by: NBjoern Walk <bwalk@linux.vnet.ibm.com>

Remove the local variable 'emulator' and just use def->emulator
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

The migration code now doesn't need it, so remove the macros and the
configure code that is detecting it.

Which is the only user. That was the only reason for including
qemu_command.h, though we need to explicitly include qemu_domain.h
afterwards.

Now that the file migration doesn't require us to use 'dd' and other
legacy stuff for too old qemus we don't even have to calcuate the
offsets and other stuff.

With the currently supported qemus we always migrate to file
descriptors so the old function is not required any more.

Additionally QEMU_MONITOR_MIGRATE_TO_FILE_TRANSFER_SIZE macro is now
unused.

Our existing virHashForEach method iterates through all items disregarding the
fact, that some of the iterators might have actually failed. Errors are usually
dispatched through an error element in opaque data which then causes the
original caller of virHashForEach to return -1. In that case, virHashForEach
could return as soon as one of the iterators fail. This patch changes the
iterator return type and adjusts all of its instances accordingly, so the
actual refactor of virHashForEach method can be dealt with later.
Signed-off-by: NErik Skultety <eskultet@redhat.com>

oVirt wants to use OVMF images on top of lvm for their 'logical'
storage thus we should set up device ACLs for them so it will actually
work.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1305922